fuel testing method Articles
-
Ethanol Detection Enzyme - Case Study
BACKGROUND This project was prompted by feedback from the Michigan Department of Agriculture & Rural Development (MDARD). Ethanol has been added as an octane enhancer in some Michigan gasoline for some time, it increases the octane almost 3 Anti Knock Index points. If gasoline contains ethanol, there is a limit of 10% of total volume for conventional fuels. [1] Around 13 billion gallons of ...
-
Get comparable ASTM/EN data for biodiesel blend while saving time and money
If you need to verity how much biodiesel is in a diesel fuel, sending a sample off to a laboratory can take several days to get an answer. This can add unnecessary delays if a truck has just been loaded for a delivery, but must wait for the lab result. The best solution is to have an on-site test where the fuel is loaded or delivered. The two most widely used analytical methods for measuring the ...
-
Maintaining biodiesel quality standards
A problem that is sometimes encountered with biodiesel blends is inaccurate blend ratios. This article describes a quick analytical method to assess blend ratios and ensure fuel performance. According to a study1 done by the National Renewable Energy Laboratory, the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry ...
-
Maintaining biodiese quality standards - Case study
A problem that is sometimes encountered with biodiesel blends is inaccurate blend ratios. This article describes a quick analytical method to assess blend ratios and ensure fuel performance According 10 a study' done by the National Renewable Energy Laboratory, the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry ...
-
Comparison of EN 14078 and ASTM D7371 infrared biodiesel methods
Infrared (IR) analysis is the most widely used measurement technology for measuring biodiesel in diesel. Both EN 14078 and ASTM D7371 methods use infrared as the analytical method and more specifically FTIR (Fourier Transform Infrared) spectroscopy. Infrared is a common spectroscopic technique used for quantitative and qualitative analysis. In the biodiesel measurement, the fatty acid methyl ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you