Fuel Testing Equipment For Energy Monitoring In Europe
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...
-
Manufactured by LEANCAT s.r.o.based in CZECH REPUBLIC
Research and development of solid oxide fuel cells poses specific requirements to the testing equipment, as it must operate at high temperatures. Leancat STS-10 satisfies all requirements of SOFC testing with the ability to preheat inlet gases and extensive scripting ...
-
Manufactured by Haskelbased in USA
H-Drive from Haskel is a technological evolution in the gas compression market. Designed by our team of knowledgeable experts, H-Drive Booster is configurable to a wide range of critical high pressure applications in a variety of diverse fields and hydraulic systems. It has been engineered to safely and reliably handle flows required for critical, high-pressure gas compression and transfer needs, ...
-
Manufactured by Stanhope - Setabased in UNITED KINGDOM
AFIDA is a revolutionary development providing you with a fully automated way of determining Indicated Cetane Number (ICN) of diesel and diesel related fuels. The AFIDA can analyse multiple samples in sequence and selects the samples using the 36-place autosampler. Only a small sample volume of 40 ml is required per test with a short analysis time of approximately 25 ...
-
Manufactured by Fuel Doctorbased in UNITED KINGDOM
100 x individual test kits for detection of water in diesel fuel in standard kit. You can order as little as 10 test kits up to 100 test kits in the one storage box, just ask for a quote. Test kits shipped in vial storage box with hinged lid. Style / color of storage box may change a little from product images. 5 minutes to complete testing. No special tools or training needed for the test. Carry ...
-
Manufactured by EBZ GmbHbased in GERMANY
The business division EBZ Fuel Cells provides standard and customised stack and cell test rigs for performance and long-term tests as well as test rigs for electrolysis or even both SOFC and SOEC. The test rigs can be equipped with different kinds of mechanical and electrical balance of plant components like air and gas preheaters, different kinds of humidification units, reforming units, gas ...
-
Manufactured by Nexterra Systems Corp.based in CANADA
Nexterra is continuously improving and expanding the capabilities of its gasification technology. This includes testing new fuels, improving gasifier performance, and developing unique applications and new products. Much of the work has been done at our Product Development Centre in Kamloops BC. ...
-
Manufactured by Fuel Doctorbased in UNITED KINGDOM
Microscopic water contamination detection & haze rating fuel quality test kit. Suitable for all types of diesel fuel testing applications: marine – power generation – construction equipment, automotive – storage tanks – transport equipment + more. Easy to use – Test results in 5 minutes: The test kit provides non-quantitative results as your first steps in ...
-
Manufactured by Kolibrik.netbased in CZECH REPUBLIC
Stackable CVM system designed for H2fuel-cell stack research and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM32A module is designed as a cost-effective solution mainly for applications. For research, automotive, testing and precision application see CVM24P or TEVOMET. ...
-
Manufactured by Opus Group ABbased in SWEDEN
Opus offers an all-in-one solution for fast, easy and reliable low pressure evaporative testing (EVAP) in ...
-
Manufactured by Kalvis, UABbased in LITHUANIA
M1 series boilers are used for heating of large sized residential and industrial premises and supplying heat for technological needs. Fuel used: saw dust wood chips, pellets of various types, compressed peat, grain waste, grain or other fuels. We can test your fuel in our ...
-
based in NETHERLANDS
The model FIT (Fuel Ignition Tester) is a desktop analyzer designed to rate derived cetane number. The FIT conforms to ASTM D7170 and IP method #PM-DI-05 to provide automated analysis of diesel fuel DCN. The analyzer is easy to use, compact and robust with a simple computerized operator interface. Maintenance of the FIT is ...
-
Manufactured by DESMI A/Sbased in DENMARK
Fuel transfer tank to tank, tank to vehicle or tank to aircraft including on board marine systems can be covered by our extensive range of transfer pumps with or without filtration ...
-
Manufactured by Regatron AGbased in SWITZERLAND
The TC.GSS series is a full bi-directional series of high-power DC source / sink units based on the thousandfold field-proven REGATRON grid-tied technology. The wideband AC input module accepts nearly all AC grid systems worldwide and disposes of an active Power Factor Correction. The novel bidirectional converter architecture allows for very fast and continuous "quadrant crossing" between source ...
-
Manufactured by LEANCAT s.r.o.based in CZECH REPUBLIC
Ideally suited for research and development of large-area single cells or verification of stack design on short-stack level. Well-defined and repeatable conditions of Leancat PTS-10 enable benchmarking of fuel cells also thanks to extensive scripting ...
-
based in GERMANY
Vehicle Energy Systems VES3.1 are specially adapted to test bench operation requirements and features: High dynamics and precision. Quiet operation. Integrated battery models. Performance ranges from 10 kW to 1050 kW. Double performance by parallel connection at full dynamic. Comprehensive security features. Customization for integration into a test bench environment. Current and/or voltage ...
-
Manufactured by Fuel Doctorbased in UNITED KINGDOM
100 x individual test kits for detection of water in diesel fuel in standard kit. You can order as little as 10 test kits up to 100 test kits in the one storage box, just ask for a quote. Test kits shipped in vial storage box with hinged lid. Style / color of storage box may change a little from product images. 5 minutes to complete testing. No special tools or training needed for the test. Carry ...
-
Manufactured by eralytics GmbHbased in AUSTRIA
ASTM D6450 was the first Continuously Closed Cup Flash Point (CCCFP) and uses 1 ml sample volume only. However, the obtained results didn’t compare well to the well-established ASTM D93 Pensky Martens method. Therefore a modified successor method was ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The 501-KB5 aeroderivative gas turbine engine shares commonality with the other single-shaft 501-K engines. Its low mass flow and high exhaust temperature makes the KB5 the ideal engine for ...
-
based in NETHERLANDS
The Model 8200 on-line Octane Analyzer is used for the continuous, accurate and reliable determination of blended gasoline octane numbers. The 8200 analyzer is fully compliant with ASTM D2699, D2700 and D2885. The Model 8200 is mounted directly to a CFR engine and includes all necessary engine accessories along with all analog and digital input/outputs needed for on-line analysis. The analyzer ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you