Fuel Testing Equipment For Energy Monitoring In USA
-
ShowcaseManufactured by Zeltex LLCbased in USA
Decades of expertise in portable octane, cetane and bio-fuel with lab-accurate analysis. 45 State Agencies have used Zeltex portable fuel octane analyzers over the years, making the ZX-101 series the gold standard in portable fuel testing. The main way that fuel is analyzed is through a CFR engine, which takes time, costs a lot of money, and destroys the sample. Our portable fuel octane analyzers ...
-
PremiumManufactured by Zeltex LLCbased in USA
Portable Fuel Analysis for Government Departments, laboratories, pipelines, research and ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...
-
PremiumManufactured by Zeltex LLCbased in USA
Portable Fuel Analysis for Government Departments, laboratories, pipelines, research and ...
-
Manufactured by Haskelbased in USA
H-Drive from Haskel is a technological evolution in the gas compression market. Designed by our team of knowledgeable experts, H-Drive Booster is configurable to a wide range of critical high pressure applications in a variety of diverse fields and hydraulic systems. It has been engineered to safely and reliably handle flows required for critical, high-pressure gas compression and transfer needs, ...
-
Manufactured by Stanhope - Setabased in UNITED KINGDOM
AFIDA is a revolutionary development providing you with a fully automated way of determining Indicated Cetane Number (ICN) of diesel and diesel related fuels. The AFIDA can analyse multiple samples in sequence and selects the samples using the 36-place autosampler. Only a small sample volume of 40 ml is required per test with a short analysis time of approximately 25 ...
-
Manufactured by FireLake Manufacturingbased in USA
Recirculating flue gases assure clean operation. Built by specialists in incinerator systems. Designed for safe, easy operation with simple to use controls. Includes many benefits of high-priced systems, yet within the budgets of small facilities. 200 pound rated load capacity. Easy to use… Set timers and walk away. Available with LP, Natural Gas, or Oil burners. Lowest operating cost in ...
-
Manufactured by Fuel Cell Materials, Division of Nexceris Companybased in USA
The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test ...
-
based in USA
Find and fix bad gas using the Mechanic In A Bottle Gasoline Test Kit. This diagnostic tool allows you to test ethanol-blended fuel in all equipment with 2-cycle and 4-cycle engines in order to determine if your fuel is fresh, marginal, or bad. This kit allows you to quickly and easily identify the sources of potential equipment problems before damage occurs; saving time and costs for equipment ...
-
Manufactured by Continental Refining Company (CRC), LLCbased in USA
If used for tax exempt purposes, fuel required to have enough Solvent Red 164 dye to be visually apparent. Must meet the standard of 3.9 lbs. Solvent Red 26 per thousand barrels product. Dyed Biodiesel contains Solvent Red (ASTM D6258H) minimum 0.1 mg/L and maximum 20 ...
-
Manufactured by eralytics GmbHbased in AUSTRIA
ASTM D6450 was the first Continuously Closed Cup Flash Point (CCCFP) and uses 1 ml sample volume only. However, the obtained results didn’t compare well to the well-established ASTM D93 Pensky Martens method. Therefore a modified successor method was ...
-
Manufactured by Nexcerisbased in USA
Our nickel ink is an excellent contact paste for SOFC testing, and is especially good for enhancing the electrical contact on the anode side of a cell during fuel cell testing. The nickel ink can also be used as a reference electrode, but any electrical testing with the nickel paste will require that the sample be under a reducing gas to maintain good electrical ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
PCI is developing several fuel reforming catalytic reactors for integration into fuel processor and fuel cell power systems including: Catalytic Partial Oxidation (CPOX) of methane, propane, gasoline, Jet A, JP-8 and diesel, Autothermal Reforming (ATR) of gasoline, Jet A, JP-5, JP-8 and diesel, Oxidative Steam Reforming (OSR) of methanol, Steam Reforming (SR) of methane, ...
-
Manufactured by FireLake Manufacturingbased in USA
Recirculating flue gases assure clean ...
-
Manufactured by Dieselcraftbased in USA
Test detects water and solid contaminants in diesel fuels. Very simple and immediate; If all 5 indicator marks are visible the test PASSES but if the indicator lines disappear then the fuel FAILS. Failed tests require Fuel ...
-
Manufactured by L.B. White Companybased in USA
Engineered to deliver reliable, directional heat, L.B. White Tradesman® horticultural heaters feature a unique 3-trial ignition system, the industry's heaviest gauge combustion chamber and burner plate, and Self Diagnostic Service Saver models for convenient trouble-shooting. L.B. White has perfected every aspect of our greenhouse heater design to withstand the harsh working environments. ...
-
Manufactured by FireLake Manufacturingbased in USA
Recirculating flue gases assure clean operation. Built by specialists in incinerator systems. Designed for safe, easy operation with simple to use controls. Includes many benefits of high-priced systems, yet within the budgets of small facilities. 400 pound rated load capacity. Easy to use… Set timers and walk away. Available with LP, Natural Gas, or Oil burners. Lowest operating cost in ...
-
based in GERMANY
Vehicle Energy Systems VES3.1 are specially adapted to test bench operation requirements and features: High dynamics and precision. Quiet operation. Integrated battery models. Performance ranges from 10 kW to 1050 kW. Double performance by parallel connection at full dynamic. Comprehensive security features. Customization for integration into a test bench environment. Current and/or voltage ...
-
Manufactured by Husky Portable Containmentbased in USA
Husky's Fuel Bladder Tanks are the perfect answer to all your fuel storage and containment needs. All Husky bladder tanks are air pressure tested before shipping, are easy to handle, and fold down for compact, easy storage. ...
-
Manufactured by DESMI A/Sbased in DENMARK
Fuel transfer tank to tank, tank to vehicle or tank to aircraft including on board marine systems can be covered by our extensive range of transfer pumps with or without filtration ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you