Fuel Testing Equipment For Energy Monitoring
-
Manufactured by Real-Time Analyzers Inc.based in USA
The Portable Fuel Property Analyzer (PFPA) provides rapid fuel quality assessment using Near-Infrared Analysis combined with advanced Chemometric methods. Key fuel properties that dictate engine performance are determined in less than 10 seconds with only 2 mL of fuel ...
-
Manufactured by HNO Green Fuels, Inc.based in USA
It is well known in the scientific community that hydrogen has a very high flame speed, Much higher than all other known gases. The following chart show the flame speed of various gases including ...
-
Manufactured by Hamworthy Heating Limitedbased in UNITED KINGDOM
Cast iron condensing, fully modulating, pre-mix gas fired commercial boiler. Available in 5 condensing models with outputs (@50/30°C) of 70, 95, 110, 140 and ...
-
Manufactured by Carter Fuel Systems, LLCbased in USA
Carter Fuel Systems offers a full offering of first generation mechanical fuel pumps. 100% factory tested and approved. Located outside the fuel tank for better protection from ...
-
Manufactured by Dieselcraftbased in USA
W-5 Test Kit: Test For Water in the Diesel Fuel Will work for clear and with red dyed ...
-
Manufactured by AgroLog by Supertech Agrolinebased in DENMARK
The Bioguard, with its ergonomic grip and back-light display, has been specially designed for reliability, comfort and ease of use. The Bioguard is used to determine water content in wood pellets or sawdust from heating wood. The right water content in the combustion mass, gives the cleanest burning and highest energy extraction. The Bioguard is also used for regular moisture measurement during ...
-
Manufactured by AgroLog by Supertech Agrolinebased in DENMARK
The Biopoint is used to determine water content in wood pellets or sawdust from heating wood. The right water content in the combustion mass, gives the cleanest burning and highest energy extraction. The Biopoint is also used for regular moisture measurement during storage, before ...
-
Distributed by Robert Bosch Manufacturing Solutions GmbHbased in GERMANY
For manufacturers as well as for users of PEM (Proton Exchange Membran) Fuel Cells moehwald offers testing solutions for: PEM Fuel Cell stacks (short- and full-stacks in various power ranges from 5kW up to > 160 kW) PEM Fuel Cell systems in different designs and power ranges (from 30kW up to >300 kW, single system up to triple-box systems) moehwald provides reliable and high accurate ...
-
Manufactured by Kolibrik.netbased in CZECH REPUBLIC
Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM64H module is ideal for testing and research purposes. CVM64H module is designed as a precise automotive-ready solution with ...
-
Manufactured by Ace Glass, Inc.based in USA
Filtration apparatus assembly. This apparatus differs from the standard units as it utilizes our Instatherm technology to evenly heat the upper 500mL filter funnel, thus keeping the viscous material such as polymers in the liquid state. The middle adapter and snap ring are PTFE. The interchangeable fritted disk is in the, 20 to 50 Micron range. The entire assembly can be taken apart for cleaning ...
-
Distributed by CTL Scientific Supply Corp.based in USA
Test sticks for the determination of water in petrol and fuel oil tanks tanks or for the determination of the thickness of oil layers in oil separators. In the course of time frequently water accumulates in petrol and fuel oil storage tanks forming a layer underneath the fuel. We recommend a special test stick to determine the depth of this water layer. To ensure the proper function of oil ...
-
Distributed by Sistemas de MediciĆ³n Especial, S.A. de C.V. (SIMES)based in MEXICO
The ultinate solution for the automated vapor pressure measurement of automotive and aviation gasoline, hydrocarbon solvents, crude oil and LPG. The speed & base of use make the ERAVAP the preferred analyzer for volatility specification compliance testing, fuel blending and research applications in the laboratory as well as in the ...
-
Manufactured by FireLake Manufacturingbased in USA
Recirculating flue gases assure clean operation. Built by specialists in incinerator systems. Designed for safe, easy operation with simple to use controls. Includes many benefits of high-priced systems, yet within the budgets of small facilities. 600 pound rated load capacity. Easy to use… Set timers and walk away. Available with LP, Natural Gas, or Oil ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The 501-KB5 aeroderivative gas turbine engine shares commonality with the other single-shaft 501-K engines. Its low mass flow and high exhaust temperature makes the KB5 the ideal engine for ...
-
Distributed by Ayalytical Instruments, Incbased in USA
Automation for Corrosion Determination. Methods: JIS K2510, ASTM D665, ASTM D7548, IP 135, ISO 7120, NACE TM-01-72. Corrosion on steel pipelines and tanks can lead to destructive leaks that can cost millions to fix and cause irreversible environmental damage.As a result, industries spend billions each year to slow down the natural process of corrosion. The National Association of Corrosion ...
-
based in NETHERLANDS
The Model 8200 on-line Octane Analyzer is used for the continuous, accurate and reliable determination of blended gasoline octane numbers. The 8200 analyzer is fully compliant with ASTM D2699, D2700 and D2885. The Model 8200 is mounted directly to a CFR engine and includes all necessary engine accessories along with all analog and digital input/outputs needed for on-line analysis. The analyzer ...
-
Manufactured by ClearSign Combustion Corporationbased in USA
Electrically charged molecules, or ions, are a natural product of the combustion process. ClearSign’s Electrodynamic Combustion Control technology introduces computer-controlled electric fields to manipulate the movement of these ions and precisely control flame shape and the transfer of heat to, through, or away from a ...
-
Manufactured by Asia Coal Catalyst Companybased in USA
DP-88 is a diesel fuel oil combustion liquid additive designed for use in diesel power trucks, buses, farm equipment, commercial vehicles, and off-road diesel powered equipment. It is a highly complex formulation containing solvents and specially developed stabilizers. It does not contain any heavy metals or other potentially harmful elements. The DP-88 additive improves operating characteristics ...
-
Manufactured by BioCNG, LLCbased in USA
Compressed natural gas (CNG) fuel is ideal for fleet managers looking for alternatives to costly gasoline and diesel fuel. Natural gas vehicles (NGVs) are good for our economy, our environment, and your bottom line. Driven by record amounts of industry investment and government incentives, more and more fleets are turning to NGVs, which use clean, inexpensive, and abundant natural gas as a ...
-
Manufactured by LEANCAT s.r.o.based in CZECH REPUBLIC
Single-cell testing is a great tool for the research and development of materials for fuel cells. Well-defined and repeatable conditions of Leancat PBT enable benchmarking of fuel cells also thanks to extensive scripting ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you