Only show results available in Massachusetts? Ok

Fuel Testing services for Energy Monitoring

  • Development Advisory Services

    LUMINATE'S DEVELOPMENT ADVISORY SERVICES span the development cycle—from inception to commercial operation—to support you at every step.

    By Luminate based in Denver, COLORADO (USA).

  • Generator Installation and Commissioning

    Hydro-Gen Engineering Generator Installation and Commissioning and Switchgear services can provide you with a technical consultant who will advise you on the best course of action in regards to your power requirements.Hydro-Gen engineering can offer cost-effective and bespoke generator solutions as well as complete peace of mind through our ...

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM. from Diesel Generators UK Service line

  • Fuel Line Testing

    TSG can perform any of the various Fire Resistance tests of fuel hoses and fuel system components. TSG has multiple test stands and fixtures to perform hose permeation testing using both the evaporative and weight loss methodologies.

    By Testing Services Group, LLC based in Lapeer, MICHIGAN (USA). from Marine Service line

  • Algae Biofuel Testing Service

    Testing, research and inspection for algae produced biofuels. Intertek tests the biofuel quality, and components of biofuels, made from algae, helping fuel researchers, producers and users reduce and avoid issues caused from contaminated or out-of-specification biofuels. Technologies for production of biofuels from algae include usage of ...

    By Intertek Caleb Brett based in Houston, TEXAS (USA). from Biofuels Services Service line

  • Waste Energy Services

    Currently involved in a two year emission measurement contract (2003-2004) for two mass burn facilities providing annual compliance testing including mercury, multiple metals, PCDD/PCDF, hydrochloric acid (inlet/outlet), total suspended particulate matter, particulate matter less than 10 microns (PM10), CEMS RATA, and quarterly cylinder gas audits ...

    By Gammie Air Monitoring LLC based in West Simsbury, CONNECTICUT (USA). from Industry Services Service line

  • Research and Development Services

    BLAZE HARMONY has long focused on research and development in the field of biomass combustion. Especially in the field of pyrolysis boilers, the resulting products significantly differ from conventional solutions, offering users savings and convenience. An innovative rotary burner solution for the combustion of pellets of varied quality and ...

    By Blaze Harmony s.r.o. based in Lipník nad Bečvou, CZECH REPUBLIC.

  • ICT-FT Fuel Testing Services

    Since 2001 once a year Philipp Koskarti organizes international comparison tests in the field of fuel testing. Changing test materials (wood pellets, olive oil residues up to hemp husks) make the laboratory comparison tests attractive for the participants. Several times, results of previous comparison tests were used by national and international ...

    By BEA Institut für Bioenergie GmbH based in Vienna, AUSTRIA. from Round Robins Service line

  • Lightning Testing Services

    TÜV SÜD Product Service has the capability to address RTCA DO160 series of specifications Section 22 up to Level 5, as well as all major Airbus and Boeing specifications. Using an EMC Partner MIG System, all multiple stroke applications are covered and also multiple bursts at 1 and 10MHz. Test equipment can be adapted to address ...

    By TÜV SÜD based in Fareham, UNITED KINGDOM. from Testing -EMC Testing Services Service line

  • Biofuel Analysis Laboratory Services

    Laboratory provides standardized solid biomass fuel analysis. It is equipped with modern specialized equipment, which is operated by qualified professionals. The laboratory has an implemented data processing information system BioLab that allows for registering, storage, and transmitting data by electronic communication devices, thus eliminating ...

    By Axis Technologies based in Kaunas, LITHUANIA.

  • Fuel Reliability Services

    AREVA offers products and services that can help achieve top plant performance. We share a common goal with our customers: to harness the highest level of expertise, innovation and in-reactor experience feedback for safe and successful fuel operation that improves performance, without compromising safety margins. Utilities want to maximize power ...

    By AREVA based in PENNSYLVANIA (USA). from Nuclear - Fuel Products & Services Service line

  • Biodiesel Feedstock Testing and Evaluation Service

    Biodiesel raw materials and feedstocks testing. Intertek tests the quality and suitability of raw feedstock materials for the production of biodiesel fuel. Using AOCS test methods, the biodiesel laboratories analyze edible oils, animal fats, recycled vegetable oils and other potential biodiesel feedstocks for contamination, byproducts, ...

    By Intertek Caleb Brett based in Houston, TEXAS (USA). from Biofuels Services Service line

  • Fuels Testing & Lubrication Testing Services

    The lab specializes in wear testing of products based on test rigs such as Four-Ball wear, Hydraulic Pump Wear, and FZG Gear. Clark Testing Fuels & Lubricants Laboratory is fully equipped to perform tests ranging from routine analyses to quality control. With over 20 years of analytical experience, coupled with a stringent quality assurance ...

    By Clark Testing based in Jefferson Hills, PENNSYLVANIA (USA).

  • Lightning Testing Service

    TÜV SÜD Product Service has the capability to address RTCA DO160 series of specifications Section 22 up to Level 5, as well as all major Airbus and Boeing specifications. Using an EMC Partner MIG System, all multiple stroke applications are covered and also multiple bursts at 1 and 10MHz. Test equipment can be adapted to address ...

    By TÜV SÜD Pmss based in Fareham, UNITED KINGDOM. from Testing Service line

  • Green Fuels Consultancy Services

    Thanks to our global reach and wide experience across a range of industry sectors, we understand the challenges you face. We can help you make sure that your biodiesel solution delivers to your needs and is compatible with local regulations and licensing laws. Our global consultancy division can help outline feedstock verification, business ...

    By Green Fuels Ltd. based in Berkeley, UNITED KINGDOM.

  • TSG Pump/Module Durability Testing Services

    TSG offers pump/module durability testing services that feature: -30C to +80C temperature range. Duty cycling. Real time data collection. Cert stock & splash blend fuels. Flex & Bio-fuel compatible. Voltage cycling, voltage dither. Elevated temperature soak vessels. Contamination testing. Safe operation in Class I, Division I rated test ...

    By Testing Services Group, LLC based in Lapeer, MICHIGAN (USA). from Automotive Service line

  • Fill Testing

    The Fill Laboratory at TSG offers clients a controlled environment in which to conduct fill tests.  Fill protocols at TSG available to all customers include nearly all major OEM as well as customer defined procedures.  In addition to controlling the fill rate during testing, the TSG fill lab features the ability to set fuel temperature ...

    By Testing Services Group, LLC based in Lapeer, MICHIGAN (USA). from Automotive Service line

  • Stirling Engine

    Within the scope of a R+D&D (research, development and demonstration) cooperation a small-scale CHP technology with a 35 kWel and a 70 kWel Stirling engine for biomass fuels has been designed. A 35 kWel pilot plant was put into operation in 2002 and was successfully tested for more than 10,000 hours. A second pilot plant with a 70 kWel engine ...

    By BIOS BIOENERGIESYSTEME GmbH based in Graz, AUSTRIA.

  • Diesel Testing as per DIN EN 590 Specification

    DIN EN 590 is a standard defined by European Authorities to test the physical properties of diesel for sale purpose. It is necessary for all diesel fuels to meet the standards which are used in European countries. There are numerous companies following the same standards even in Middle East. Below is a list of parameters and their associated test ...

    By Accredited Test Laboratories based in Dubai, UNITED ARAB EMIRATES. from Diesel Testing Service line

  • PBS - Grinding and Inspection of Gears

    Grinding and measurement of cylindrical gears with outer involute straight or helical gearing.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC. from Special Technologies Service line

  • Fuel Testing and Analysis Service

    ESG provide customers with guidance and support in relation to the quality of fuel used in a variety of applications. The implementation of fuel quality directives such as Ultra Low Sulphur Diesel (ULSD) and the increasing use of Bio-fuels has increased the need for customers to ensure that fuels are correctly stored and the effects of any changes ...

    By Environmental Scientifics Group based in Staffordshire, UNITED KINGDOM. from Laboratories and Analytical Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you