Power Discharge Testing Equipment For Energy Monitoring In Europe
-
Manufactured by Froniusbased in AUSTRIA
For charging or charge conservation of conventional lead acid, lead calcium/silver batteries, or those of the sealant type (AGM, MF), as well as maintenance-free lead GEL batteries. Batteries of various types, with different levels of charge, can be charged simultaneously. Each individual charging circuit can be used for testing and charging. Indication of battery charge status using bar charts ...
-
Manufactured by Crestchic Ltd.based in UNITED KINGDOM
Corona is Crestchic’s state of the art software based control system for DC Load banks. It comprises of a high performance microprocessor housed within the load bank enclosure providing supervisory operation & monitoring, along with real-time data acquisition from the load bank instrumentation, coupled with either the HHT100 or a PC based ...
-
Manufactured by Hargassner Ges.m.b.Hbased in AUSTRIA
The underfeed firing technology is a cost-effective construction for industrial requirements. HPKI-K systems are suitable for wood-like fuels with a moisture content of up to ...
-
Manufactured by Atersabased in SPAIN
The GEL batteries are also stationary, so they are also characterised for their long life. The difference stems from the electrolyte that is gelled, in such a way that they do not require maintenance and can operate placed in any position. ...
-
Manufactured by Schneider Electricbased in FRANCE
Main Range: PowerLogic. Device short name: ION92040. product or component type. Energy and power quality meter. Device application: Power monitoring, WAGES metering, Net metering, Medium voltage, High ...
-
Manufactured by Deep Cycle Powerbased in ROMANIA
We purchased these cells from a trusted source and we put them to the test. Discharging with 20A produced a sag exactly the same with the datasheet and no overheating. We compared with fake cells and it was clear that these are far better. We also have fake LG Hg2 that we purchased for testing and demonstration purposes, they are good fakes, but will not resell those because no one knows what ...
-
Manufactured by Vanadis Power BVbased in NETHERLANDS
ReFlex™ is our unique and sustainable battery, for commercial, industrial and utility-scale energy storage. It is a modular product, that can be scaled from 10 kilowatt to 100 megawatt. ReFlex™ is a Vanadium Flow Battery (VFB) for stationary energy storage. A multi-million-dollar development programme resulted in this unique and patented product. With close to 1,000,000 hours of ...
-
Manufactured by Accumation GmbHbased in GERMANY
Function and characteristics: Automatic high rate discharge testing of automotive batteries. Safe contact using tongs. Various test devices available. Exclusion station for reject batteries. Various expansion stages up to fully automated available. Automatic polarity switch available. Use of acid-resistant ...
-
Manufactured by HVP High Voltage Products GmbHbased in GERMANY
The High Power C series features 17 highly efficient models that range from 125 to 60,000 VDC. They are available in single–output positive or negative polarities. Benefit from up to 250 W of fast-rise charging power with less than 1% overshoot from a 24 VDC input. Easily control and monitor high voltage output and current from one of the several available analog interfaces. The High Power ...
-
Manufactured by IPEC Ltdbased in UNITED KINGDOM
PrecisePD is an on-line Partial Discharge Spot Testing and Location System for Cables and Switchgear with advanced signal processing, used for the detection of PD in high noise environments. PrecisePD allows users to investigate and locate Partial Discharge sources on live electrical equipment, helping to prevent potential faults in high voltage assets. Designed by IPEC Ltd, the PrecisePD Spot ...
-
Manufactured by Tecvalbased in SPAIN
TECVAL MB-1.2 manifolds are designed to work with fluid under high pressure and/or high temperature service. Their distribution diagram consists of two valves commanding the main line, where inlet and outlet are at 180º, and a discharge or testing line outlet at 90º ...
-
Manufactured by Stornetic GmbHbased in GERMANY
EnWheel brings together all the requirements for the efficient loading and high-power discharge of electrical energy at virtually any ...
-
Manufactured by Gustav Klein GmbH & Co. KGbased in GERMANY
TYP I-TS-3870 & MI-TS-3871: I-TS-3870: Single-channel system for testing and simulation of batteries, fuel cells and powertrains. One output with up to 1000 V or 1000 A. Maximum power in single operation 650 kW, up to 1.3 MW in parallel operation. MI-TS-3871: Multi-channel system for energy-saving tests and simulations. Two or four outputs, up to 1000 V and 1000 A per output (without galvanic ...
-
Manufactured by Kurt.Energy, A Division of Altreonic NVbased in BELGIUM
This technology is a new type of hybrid supercapacitor with a much higher energy density. It bridges a gap between traditional (often Lithium-based) supercapacitors and lithium-ion battery cells but uses activated carbon as its active ingredient. Contrary to batteries there is no chemical reaction involved when charging or discharging. Hence, they pose no safety risk, can work at low ...
-
Manufactured by Froniusbased in AUSTRIA
Nice and compact, nice and smart. Small, high-performance, electronically controlled plug-in charger and tester. Charging and testing in one. A microprocessor controls the charging process and monitors all functions of the device. You can also test the startability of the battery, the charge level of the battery, and the functioning of the alternator. All with this small ...
-
Manufactured by Schneider Electricbased in FRANCE
Range: TeSys. product name: TeSys island. device short name: TPRST. Product or Component Type: Motor starter. motor starter type: Direct on line. device presentation: Direct starter connected to an automation controller through a bus coupler, Operational only when connected to a bus ...
-
Manufactured by HVPDbased in UNITED KINGDOM
For quick identification of Partial Discharge. The PDS Insight™ 2 is a portable On-line PD detection unit for condition-based maintenance and substation access safety. Simple to use, this handheld unit can be placed in the palm of your hand for safe, reliable testing of MV electrical assets. The Phase Resolved Partial Discharge (PRPD) feature in the PDS Insight™ 2 eliminates misleading ...
-
Manufactured by HVPDbased in UNITED KINGDOM
The World's First On-line Partial Discharge Handheld Test Unit with an Asset Management Application – the OLPD Manager ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you