Power Monitoring System (Power Monitoring) Equipment
-
based in GERMANY
The Power System Monitoring PFM300 is a multifunctional Dynamic System Monitor which fully integrates with DIgSILENT PowerFactory software. PFM300 features grid and plant monitoring, fault recording, power quality and grid characteristics analysis. It provides easy access to ...
-
Manufactured by Binsfeld Engineering Incbased in USA
The TorqueTrak Torque and Power Monitoring System (TPM2 series) is a rugged precision instrument designed to measure torque and/or power on rotating shafts in real time. The TPM2 uses RS422 full duplex, point - to - point serial interface communication. The TPM2 is custom designed to fit on shafting up to 40 inches (1016 mm) in ...
-
Manufactured by KONÄŒAR - Electrical Engineering Institute Ltd.based in CROATIA
Torque, speed and power are the defining mechanical parameters associated with functional performance of rotating machines (machine efficiency determination). ST&P system enables insight into this important machine parameters by on line measurement of shaft twist angle. The system uses two precise optical fork sensors for twist ...
-
by natcon7 GmbHbased in GERMANY
Hardware and software matched to your power generation equipment. Your profit is determined by the performance and availability of your power plant. When your power plant equipment is on the blink, you need independent, industrial-grade ...
-
Manufactured by ERLPhase Power Technologies Ltd.based in CANADA
TESLA 4000 is an easy-to-use and cost effective, state of the art, multi-time frame (simultaneous) power system monitoring recorder. The integrated Phasor Measurement Unit (PMU) functionality streams synchrophasor data for wide area monitoring. The TESLA creates records simultaneously in three time domains - fault (fast), dynamic ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Multifunctional power monitor with system analysis. Panel mounting, 144 x 144 mm. The A230 is designed for application in high, medium and low voltage systems. Any current and voltage transformers are taken into account in the calculation of the measured ...
-
Manufactured by Binsfeld Engineering Incbased in USA
The TorqueTrak Revolution Series is a torque and power monitoring and control system that features inductive (non-contact) power and data transfer for continuous operation. Designed for applications that require ongoing measurement of torque and/or horsepower the TorqueTrak Revolution system is custom-machined to ...
-
Manufactured by Zhengzhou Hanvy Industrial Co., Ltd.based in CHINA
Whether from the perspective of the power cable's own safe operation or from the perspective of power system dispatching requirements, the load capacity of the power cable is required to be monitored in real time.When the cable runs under the rated load, the core temperature reaches the allowable value.Once the ...
-
Manufactured by Pentol-Enviro AGbased in SWITZERLAND
In power generation SO3 measurements provide data to allow the operator to burn fuel in the most efficient way to minimize corrosion of the plant and limit acid discharges to the environment. Monitoring of SO3 is also important where it is formed as a by-product, e.g. in De-NOx systems.In processes where H2SO4 is used or ore with large ...
-
Manufactured by Extreme Endeavors & Consultingbased in USA
The IPAC 3P is an intelligent power monitoring and control system that offers safety and economy by monitoring, controlling, and feeding back on electrical installations and equipment. Specially designed for 3 phase power, the system can measure all the important parameters and feedback the ...
-
Manufactured by OkSolar.combased in USA
Remote-Video Monitoring System adds video monitoring and remote-access capability to DOT Departments Solar Powered Wireless Traffic Video Monitoring Surveillance IP Video Anywhere!Utilizing the best current technology in wireless radios, digital cameras, and solar power, IQMilitary have developed ...
-
Manufactured by Yingkou Tiancheng Fire Fighting Equipment Co. Ltdbased in CHINA
of the module to the monitoring host in both normal and fault modes. Ability to upload current status values of monitored devices in real time. Wire system: It is connected to the monitoring host by a non-polarity signal two bus, and the power cable is connected by a non-polar two-wire system. ...
-
Manufactured by Yingkou Tiancheng Fire Fighting Equipment Co. Ltdbased in CHINA
of the module to the monitoring host in both normal and fault modes. Ability to upload current status values of monitored devices in real time. Wire system: It is connected to the monitoring host by a non-polarity signal two bus, and the power cable is connected by a non-polar two-wire ...
-
Manufactured by Socomec Groupbased in FRANCE
The DIRIS Digiware BCM is a multi-circuit current measurement module with 18 or 21 integrated sensors and allows the monitoring of all types of power distribution units (PDUs). These modules are also equipped with three RJ12 channels allowing them to be connected to TE/TR/iTR/TF current sensors using RJ12 cables and various ΔIC ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Transducer for the measurement of phase angle or power factor in single-phase or 3-phase electrical systems with symmetrical ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
The PM20 module extents the basic PM10 module by varied visualising and analysis options for system quality instruments. The PQDIF files of system quality instruments are imported, converted and written into the database. Measured data may be issued as a report according to ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
This measurement solution supports campaigns (repeated measurements at the same location) by a configuration manager with up to 20 storable device settings, can provide a WLAN access point for connecting mobile devices and provide all data for evaluation via the device's own website. In order to be able to validate the power ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
The LINAX PQ3000 combines the characteristics of a power quality measurement device with functions for comprehensive energy consumption and condition monitoring. It stands out by the display quality and intuitive ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
The MAVOSYS 10 opens up entirely new possibilities for monitoring mains quality, power and energy: It's the first mains analyzer with more than 8 channels, it can be configured in a modular fashion and it provides an ideal, cost-saving solution for all requirements. In combination with an optional ¼ VGA touch-screen, the multiuser ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
The LINAX PQ5000 combines the characteristics of a power quality measurement device with functions for comprehensive energy consumption and condition monitoring. The integrated webserver allows remote access to all measured data and the parameterization of the device. The device provides a wide functionality, which can be extended further by ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you