Power Monitoring Equipment For Energy Monitoring
-
Manufactured by Techno-AC LLCbased in RUSSIA
DODK-117 is used for insulation damage control at gas\oil pipes and power cable lines. This sensor operates with the receiver (AP-019, AP-027) and exploits the principle of voltage ...
-
Manufactured by Sensaphone, Inc.based in USA
The WSG Wireless Dry Contact sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and input terminals for connecting to any normally-open or normally closed output. (Use of this device with solid-state outputs is not recommended.) The sensor comes with two AA alkaline batteries which will power the sensor for up to two years. An ...
-
Manufactured by Cyber Power Systems (USA), Inc.based in USA
The CyberPower BP36V60ART2U rack/tower convertible Extended Battery Module (EBM), which extends battery runtimes during power outages, is designed for Smart App Online UPS systems OL1000RTXL2U and OL1500RTXL2U. This EBM takes 2U of rack space and can be installed in a rack or tower configuration to match the UPS form factor. It also has a built-in battery charger, providing Fast Charge Technology ...
-
based in FRANCE
Poseide® is an in situ autonomous measurement device able to assess actual extractible power. The device is easily deployable, all over the world. We are able to build high resolution numerical current speed models of installation sites. The models are fed with in-situ speed and power datas from the measurement campaigns. This double expertise allows us to provide reliable information on ...
-
Manufactured by Hawker Electronics Limitedbased in UNITED KINGDOM
The MiniSonda provides accurate, reliable level measurement for liquids and slurries, it is a loop powered, ultrasonic transmitter which operates from a 20-38V D.C. voltage, thus enabling the 4-20mA signal produced to transmit over relatively long distances. If 4 control relays, digital indication and a power supply are required use flexilevel2 as a unit to add on (see data sheet No 288). If only ...
-
Manufactured by Europäische Funk-Rundsteuerung GmbH (EFR)based in GERMANY
Four-line / direct, semi-indirect or indirect connection / +A/-A, four-quadrant measurement / RS-485 bus / TLS ...
-
Manufactured by Cyber Power Systems (USA), Inc.based in USA
A rack/tower UPS with double-conversion topology, the CyberPower Smart App Online OL1000RTXL2U provides sine wave output to mission-critical applications and equipment requiring seamless power protection. This model comes with an extendable LCD control panel, Smart Battery Management charging design, Fast Charge Technology, and energy-saving GreenPower UPS™ ECO Mode. The OL1000RTXL2U offers ...
-
Manufactured by Measurlogic, Inc.based in USA
DC power / energy sub-meter provides Voltage, Current, Power and Energy measurements. Bi-directional for renewable systems (NET metering). Interfaces with shunt or external Hall Effect current sensors. Up to 800Vdc Voltage input. Embedded Ethernet connectivity - Modbus/TCP, BACnet/IP, SNMP or DNP 3.00. RS-485 connectivity - Modbus RTU or BACnet MS/TP. Communications setting via DIP switches for ...
-
Manufactured by Astrel Group Srlbased in ITALY
Elios4you Smart is a monitoring and self-consumption device for single-phase PV systems rated up to 12 kW, allowing automatic control of up to four wireless accessories for managing self-consumption. With the “Elios4you” App, besides monitoring the production of their photovoltaic system simply and intuitively, users can also programme the activation of electrical appliances according ...
-
Manufactured by Calmet sp. z o.o.based in POLAND
Electricity meters tester class 0.05% and 0.1%. Three phase tester of current transformers and analyser of power network quality. It makes possible electricity meters testing on the site or in the laboratory. ...
-
Manufactured by AMETEK Scientific Instruments / Solartron Analyticalbased in UNITED KINGDOM
Electrical bio-impedance is a well-proven, powerful technique for analyzing a wide range of ionic and charge transfer processes in bio-materials. Until now, the use of impedance in bio-material applications has been limited by a number of factors, such as the ability to measure accurately the very low currents involved, and the need for safe working when performing experiments on living tissue. ...
-
Manufactured by Mecc Alte SpAbased in ITALY
GC315 is suitable for managing the most common single or three phase generator applications (Single Prime Mover and Single Standby gensets). It can monitor three phase (RMS) mains voltages and three phase (RMS) generator voltages and currents. An integrated J1939 Canbus interface enables the controller to be used with electronic engines. A traditional interface can be used for non-electronic ...
-
Manufactured by HT Italia S.r.L.based in ITALY
HT4020; Professional clamp meter AC TRMS 400a with power measurement. TRMS. Ac current up to 400a. Active, reactive, apparent power. Active, reactive, apparent energy. Cosphi, frequency and phase sequence. Cat ...
-
Manufactured by Acksen Ltd.based in UNITED KINGDOM
The EC-7VAR energy recorder is used by electrical contractors, power distribution companies, facilities management, electrical or site-services and maintenance engineers to monitor power (kW)/energy (kWh) usage, check voltage and current variations helping them to diagnose any related issues, or to gather data perhaps to make representations to their power supplier. Extensively used for UPS ...
-
Manufactured by Campbell Scientific, Inc.based in USA
By using Campbell Scientific’s external line of cellular modules, system integrators, OEMs, and large end users can avoid costly, time-consuming maintenance visits to remote devices around the world. The CELL200 series of external cellular modules are 4G LTE cellular devices that provide serial or CS I/O connectivity to a number of cellular networks, including Verizon, AT&T, T-Mobile ...
-
Manufactured by Macrodyne, Incbased in USA
The Model 1692C Integrated Recording Unit records both transient fault and long term disturbance events with instrument class accuracy, adding a new dimension to power system recording instruments. ...
-
Manufactured by Thomson Power Systems member of Regal Beloit Corporationbased in CANADA
Series 2400 Paralleling Switchgear is the most intelligent, advanced Switchgear available today designed specifically for use in the Power Generation ...
-
Manufactured by Shenzhen Sanpo Instrument Co., Ltd.based in CHINA
This tachometer is used the microcomputer (CPU) technique, photoelectrical technique and LCD for one instrument combine PHOTO TACH & MOTION & SURFACE MAR. Large LCD display with backlight. Digital control adjust flash frequence. Low power ...
-
Manufactured by Brightgreen Pty. Ltd.based in AUSTRALIA
Crafted with your apparel in mind, the CH15 Linear LED clothes hanger gives you Tru-Colour illumination where it’s needed most. A slimline design means that it can be placed close to clothing, instead of behind a clothes rail or overhead. No shadows are formed from upper shelves or anyone standing in front of the rails - creating the perfect clothing ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
Extech’s SP505 measures solar power level from outdoor sunlight to determine the best location of solar panel and solar water heater installations. It is also used indoors by window manufacturers, automotive industry, and remodeling home owners to check the level of solar radiation transmission through various glass thicknesses and degrees of tinting to use for window installations. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you