Energy Monitoring Equipment Near Colorado
-
Manufactured by John Deerebased in USA
Built on the highly reliable platform of their predecessors, these models are loaded with even more customer-inspired productivity-and uptime-increasing features. John Deere PowerTech EPT Final Tier 4 (FT4)/EU Stage IV diesels provide generous displacement, power, and lugging ability. Daily checks and maintenance access are even easier. And all new K-Series-II Loaders come with a standard ...
-
Manufactured by John Deerebased in USA
The 60G’s compact size and reduced-tail-swing design enable this small-but-mighty machine to specialize in close-quarters work. But that’s not the only reason to run one. Its highly fuel-efficient, direct-injected diesel meets rigid Final Tier 4 emissions standards and is noticeably quiet so you can put it to work almost anywhere, any time. Standard-equipped with backfill blade, ...
-
Manufactured by MACEbased in AUSTRALIA
The FloSeries3 I/O card supports seven sensor inputs and four control outputs including 4-20mA, voltage and digital. The card also supplies 12V to power your add-on ...
-
Manufactured by John Deerebased in USA
Built on the highly reliable platform of their predecessors, these models are loaded with even more customer-inspired productivity- and uptime-increasing features. John Deere PowerTech EPT Final Tier 4 (FT4)/EU Stage IV diesels provide generous displacement, power, and lugging ability. Daily checks and maintenance access are even easier. And all new K-Series-II Loaders come with a standard ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
Waste to energy: In an RDF plant, various mixed or pre-sorted waste streams are shredded, screened and separated to generate refuse-derived fuels for all kinds of applications. Cement works and heating plants are the major users. The typical process starts with shredding using a Terminator, followed by screening of the fines (if there is a substantial organic component), separation of the ...
-
based in ICELAND
With the increasing demand for clean energy Wind Energy has become the worlds fastest growing electricity generation technology. Vista Data Vision is a powerful software for studying the expected outcome from a Wind Site as well as comparing Wind Turbine"s real performance to the design ...
-
Manufactured by John Deerebased in USA
With two variable-displacement piston pumps designed to deliver 'best-in-class' multi-functioning, the 437D with load-sensing hydraulics offers significant reduction in engine speed, noise levels, and fuel consumption. A dedicated swing circuit gives you continuous power for more productive delimbing and loading, while John Deere's 6068T turbocharged diesel has the high torque you need. And a ...
-
Manufactured by John Deerebased in USA
Don’t let its compact stature fool you. Like its larger G-Series siblings, the 35G is exceptionally durable. And for good reason — it shares many of the same uptime-boosting features such as powdered-metal oil-impregnated boom, arm, and bucket bushings. Rigid reinforced D-channel side frames. And heavy-duty X-frames. When you know how it’s built, you’ll run a ...
-
Manufactured by John Deerebased in USA
Built on the highly reliable platform of their predecessors, these models are loaded with even more customer-inspired productivity- and uptime-increasing features. John Deere PowerTech EPT Final Tier 4 (FT4)/EU Stage IV diesels provide generous displacement, power, and lugging ability. Daily checks and maintenance access are even easier. And all new K-Series-II Loaders come with a standard ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen (O2) and fuel in premix gases, operating in either excess fuel or excess air conditions. It has the capability to measure the air/fuel ratio in open-flame applications where flue gas measurements are not practical, with measurement and display options including excess O2, excess fuel, oxides/fuel ratio and ...
-
Manufactured by John Deerebased in USA
Looking to get more out of your “mini ex”? Make your next compact excavator one of our G-Series. Inspired by input from equipment owners and operators like you, this 50G Compact Excavator is loaded with customer-driven enhancements. Such as a more spacious cab with a wider entryway. Larger expanse of glass for unsurpassed visibility. Fuel-saving auto-shutdown and power/economy work ...
-
Manufactured by John Deerebased in USA
The 9009A TerrainCut Rough Mower: where productivity and control meets cut quality. Until now, using a wide area mower in the rough meant compromising on your quality of cut. With the new 9009A TerrainCut Rough mower, you can now maximize both your productivity and your cut quality while having more control over how it performs on the course. The 9009A is a five-gang, 27-inch (68.58 cm) ...
-
Manufactured by Emporia Corpbased in USA
The Emporia Vue Energy Monitor installs in an electrical panels. It supports either single-phase up to 240VAC line-neutral; single, split-phase 120/240VAC; and three-phase up to 415Y/240VAC (no Delta). We recommend using a licensed electrician. The Vue monitors the total energy use and solar net metering of your home through a simple iOS or Android app. Additionally, you can add 50A sensor ...
-
Manufactured by Emporia Corpbased in USA
The Emporia Vue Utility Connect energy monitor is a wireless Home Area Network (HAN) device that easily plugs into a standard 120V electrical outlet in your home near your ZigBee® Enabled AMI Smart Meter. The system protects your home’s health by helping you manage energy use and solar net metering while making your home more energy efficient through a simple iOS or Android app. This ...
-
Manufactured by Emporia Corpbased in USA
The Emporia Electric Vehicle EV Charging Station is a Level 2 electric vehicle charger that charges any EV up to 40 amps with NEMA 14-50P or up to 48 amps with hardwired installation. It comes with a 24’ cable (from charger to tip of gun) with an SAE J1772 connector so it works with all electric cars. Its watertight NEMA Type 4 enclosure is made to withstand the elements ...
-
Manufactured by Emporia Corpbased in USA
The Emporia V2X Charging Station is a bi-directional car charger that can use your car battery to power your home (V2H) or the grid (V2G). Equipped with a silicon-carbide-based AC/DC inverter designed by BREK Electronics, it's capable of up to 11.5kW charging or discharging power, it’s compatible with CCS Type 1 connectors. Its waterproof IP66 enclosure is made to withstand the ...
-
Manufactured by Emporia Corpbased in USA
This tailor-made Smart Home Battery System consists of three components: 1) 7.6kW or 9.6kW split-phase, AC and DC coupled inverter (grid isolation when DC coupled). 2) External isolation transformer. 3) 8.2kWh 256V DC high voltage Lithium Ion (LiFePO4) battery module. The system can support 6 modules for a maximum capacity of 49.2 kWh to store energy from solar or grid. Use the stored energy ...
-
Manufactured by Evapco Dry Cooling, Inc.based in USA
State-of-the-art technology for vacuum steam condensing in the power generation industry. Superior Heat Transfer: The Advanced Technology ACC features the nuCore™ heat exchanger, an innovative new technology pushing the boundaries of heat transfer in dry cooling applications. The nuCore was designed and engineered from the ground up by EVAPCO using computational fluid dynamics, laboratory ...
-
PremiumManufactured by ENVEAbased in FRANCE
Non Dispersive Infra Red Carbon Monoxide, criteria pollution monitor for CO measurements in the range 0-50ppm. CO2 monitoring as option. The CO12e analyzer is an Eco-designed, reference air quality monitor, QAL1 certified by the TUV, US-EPA approved and compliant with ISO 4224. It offers superior metrological performances for CO measurements in the range 0-300 ppm. CO2 monitoring as an option ...
-
Manufactured by Paharpur Cooling Towers Ltd.based in INDIA
Our Air-cooled Heat Exchangers are the preferred solutions for applications which require a great deal of customisation. Paharpur has forced and induced draught systems with design pressures up to 160 bars, comprehensive process control options and various kinds of finned tubes. We have a team of experienced engineers that assist you throughout the design stage, to ensure that all possible ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you