Energy Monitoring Services In Austria
-
Manufactured by Leitwind SPAbased in ITALY
LEITWIND manages and monitors every single wind turbine through its services (field service, 24/7 monitoring, spare part ...
-
Manufactured by Polytechnik Luft- und Feuerungstechnik GmbHbased in AUSTRIA
In order to efficiently conduct our research and development, one of the most advanced test facilities for biomass fuel is located at our Weissenbach site. The test facility simulates every possible kind of customers’ requirements (as for example full/partial load behaviours, change speeds for load changes). The test facility simulates every possible kind of customers’ requirements ...
-
based in AUSTRIA
URBAS ENERGIETECHNIK has realised well over 1000 biomass energy systems and has decades of experience in the use of biogenic fuels to produce energy. The expertise we have thus developed enables us to provide well-founded consulting for project ...
-
based in USA
Win more business and boost your performance using the power of the cloud. Scenario Services for SACS Wind Turbine Analysis: Achieve full design code compliance by considering all possible load scenarios in a fraction of the time it would take on your desktop. Using Scenario Services for SACS Wind Turbine, hundreds of load cases can be executed in parallel on the cloud. Achieve 10x or more time ...
-
based in AUSTRIA
Description of the biomass CHP technology based on biomass gasification The objective of the thermo-chemical biomass gasification process is the best possible conversion of solid biomass fuels into a high calorific product gas. Thereby, biomass reacts with a fumigator (air, oxygen, steam or CO2), which provide oxygen for the process. Due to the thermal cracking and the partial oxidation a product ...
-
Manufactured by HIABbased in FINLAND
Hiab’s services go hand-in-hand with our class-leading load-handling equipment. As a business, securing uptime and protecting the value of your equipment over the lifetime are critical for you. Hiab is constantly enhancing its service network and services offering - from installation, to training, inspection, original parts e-commerce, to Hiab ProCare™ full repair & maintenance ...
-
based in AUSTRIA
Aims of QM for biomass heating plants The substantial aims of the QM system cover the professional design, planning and construction of the biomass plant and the district heating network. The most important quality aims are: reliable, low-maintenance operation high efficiency and low heat distribution losses low emissions at all boiler operating conditions precise control system adapted to ...
-
Manufactured by Rosler Metal Finishing USA, LLCbased in USA
Rosler Retrofit: Plant modernization;Through our retrofit brand, Tune-Up, we offer a broad range of systematic and unique solutions for blasting technology, including: an innovative range of turbines featuring the Rutten und Gamma G designs, a large selection of blast nozzles, as well as components for automation and optimized controls for process consistency. Retrofit cannot only minimize ...
-
Manufactured by Rubble Masterbased in AUSTRIA
The efficient assistent for more profitability. Many of our customers rent out their crushers and screens on a project-to-project basis or have several machines in operation at the same time. Keeping track of all the machines and collecting the necessary machine data could take a lot of time. Fleet management and condition monitoring solve the problem. RM XSMART makes it easy to deliver effective ...
-
by SISTEMA GmbHbased in AUSTRIA
Improved performance of solar panels energy production and energy storage. In this field, satellite observation plays a fundamental role in providing real on-ground irradiance values over wide areas, instead of using, as normal practice, simulated datasets or extrapolated historical ...
-
based in AUSTRIA
Measurements Analyses Lab-scale reactors for fuel characterisation and combustion tests Biomass furnace coupled with a drop-tube Combustion tests at pilot-scale combustion ...
-
based in AUSTRIA
Within the scope of a R+D&D (research, development and demonstration) cooperation a small-scale CHP technology with a 35 kWel and a 70 kWel Stirling engine for biomass fuels has been designed. A 35 kWel pilot plant was put into operation in 2002 and was successfully tested for more than 10,000 hours. A second pilot plant with a 70 kWel engine is in operation since autumn 2003. The newly ...
-
based in AUSTRIA
The services offered by BIOS regarding ash utilisation are: - Performance of R+D projects for the practical utilisation of biomass ash - Chemical analysis of biomass ash, characterization and evaluation of utilisation possibilities - Implementation of concepts for fractionated heavy metal separation in biomass combustion plants - Preparation of ash utilisation and logistics concepts for biomass ...
-
Manufactured by Global Hydro Energy GmbHbased in AUSTRIA
The future belongs to HEROS. We offer digital hydropower plant management solutions that control, monitor and optimize all plant operations. HEROS, our state-of-the-art software solution, supports you with reliable and safe operational ...
-
Manufactured by KPV Solar GmbHbased in AUSTRIA
KPV plans and develops large Photovoltaic and Solar Thermal power plant projects for investors. This includes carrying out the initial economic feasibility forecasts, finding a suitable location, securing title to the land (including obtaining all necessary permits) and taking care of all feed-in contracts with energy utilities. A team of experienced technicians develops all required designs in ...
-
based in AUSTRIA
Light, energy or data? We make sure that everything flows in your building - no matter whether residential building, public or commercial building, whether complete reinstallation or removal of existing facilities. In doing so, we also take into account possible future developments with regard to the use of the building and lay out the necessary electrical installations accordingly - from the ...
-
Manufactured by ANDRITZ Energy & Environment GmbHbased in AUSTRIA
Based on the long-term experience and competences of our staff, ANDRITZ is able to provide operation and maintenance services in order to optimize power plant performance and to ensure asset reliability. Operational control can be achieved locally with an on-site team or remotely with our experienced operators located in our Regional Control Centre. They are able to manage plant performance and ...
-
based in AUSTRIA
Plant monitoring is the detailed evaluation of the performance of overall plants as well as of single plant components. In biomass heating and biomass CHP plants as well as biogas plants monitoring represents an important basis for process optimisation, especially during the start up phase and the first year of operation but also as a basis for trouble shooting. At BIOS plant monitoring is ...
-
based in AUSTRIA
At present the only useful technologies from a technical and economic point of view for CHP generation based on biomass fuels in the power range between 200 to 1,500 kWel are the screw-type steam engine and the ORC process. The screw-type engine is used for steam applications and is orientated to industry and process heat supply. The screw-type engine cycle is based on the conventional Rankine ...
-
Manufactured by BDI-BioEnergy International GmbHbased in AUSTRIA
BDI Research and development activities. Research and development activities are fundamental for us in order to continue setting standards in special plant construction with our own technologies. Therefore, we invest a significant proportion of our annual turnover in future-oriented research and development (R&D). For many years, we have successfully cooperated with external institutes and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you