Turbine Monitoring Equipment For Energy Monitoring In Europe
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...
-
Manufactured by Nordic Wind Technology ApSbased in DENMARK
The first turbines in the S6X series from Suzlon were manufactured in 2002 and eventually phased out in 2016. Today 3673.75 MW of total capacity of S62 and similar turbines (S64 and S70) is installed around the globe. S62 turbines feature an asynchronous generator with a SFS (Suzlon Flexi Slip) system. This enables the generator to run with a high slip and thus operate within a limited speed ...
-
Manufactured by Nordic Wind Technology ApSbased in DENMARK
Manufacturing of the S6X series wind turbines began in 2002 and Suzlon eventually phased out production in 2016. Around 3673.75 MW of total capacity is installed around the globe (counting S70, S64 and similar turbines). Suzlon built the S70 turbines with an asynchronous generator and a SFS (Suzlon Flexi Slip) system, enabling the generator to run with a high slip. In combination with the pitch ...
-
Manufactured by Nordic Wind Technology ApSbased in DENMARK
Suzlon inducted the S82 turbine in 2006 and phased out production in 2015. During these years a combined capacity of around 3034.5 MW was installed worldwide. S82 turbines contain an asynchronous generator with a SFS (Suzlon Flexi Slip) system enabling the generator to run with a high slip and operate within a restricted speed range. This – in combination with the pitch system – makes ...
-
Manufactured by Stork, a Fluor Companybased in NETHERLANDS
Lifecycle services to ensure steam turbines run at peak performance. Peak performance: Turbines are expensive and production-critical pieces of equipment that need to be up & running at peak performance at all times. Avoiding unplanned downtime and extracting the maximum energy output, rank high on the wish list of most asset owners. While being a stand-alone piece of equipment, turbines are ...
-
Manufactured by Heliocentris Academia International GmbHbased in GERMANY
Made with professional-grade materials, the Horizon Renewable Energy Trainer allows a semester of high-quality experiments in renewable energy for any laboratory. The included solar energy simulator, projector, and wind turbine provide multiple renewable energy technologies for students to explore. The interactive software, also included, enables complete control of every aspect of the simulators ...
-
based in ITALY
Wind power has been experiencing an extraordinary development in the last few years. And it is expected to grow at a rate of 30% per year in the near future. In Italy it has been the source that has reported the highest growth in the last decade. ...
-
based in UNITED KINGDOM
Utilising a variety of access techniques for inspection, GEV are able to provide a fast and effective service to complete the detailed analysis of all aspects of damage to the ...
-
Manufactured by ZX Lidarsbased in UNITED KINGDOM
Full IEC Classification, the longest service and warranty period as standard of any Lidar and accepted by DNV GL as a Stage 3 Bankable ...
-
Manufactured by Wingardium-Energybased in BELGIUM
The Cyclone series is an alternative to the known windmills. These turbines are made to measure and range from 1 MW to 12 MW. I.p.v. depending on the more powerful wind in the higher wind layers, the Cyclone work turbines by catching the wind on the largest possible vertical ...
-
Manufactured by Nordex SEbased in GERMANY
The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by 20 percent. This translates into a capacity ...
-
Manufactured by Nordex SEbased in GERMANY
The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind conditions. The N100/2500 is one of the largest turbines in the Nordex product line and its yield rates among the highest in its power class. With a rotor sweep of 7,854 square metres, this IEC-2 certified turbine operates particularly profitably in medium and low wind ...
-
Manufactured by NRG Systemsbased in USA
TurbinePhD is the most cost-effective and easy-to-use vibration-based condition monitoring system in the wind industry. This complete condition monitoring solution includes purpose-built hardware, automated analysis of the vibration data, and an intuitive web-hosted user interface. Unlike traditional condition monitoring systems, TurbinePhD was designed to be accessible to all levels of your ...
-
Manufactured by LGS by Texysbased in FRANCE
The fully modular concept of our measurement units allows you to configure and optimize performance and therefore cost according to your specific ...
-
Manufactured by Brüel & Kjær Vibrobased in GERMANY
With more than 30,000 condition monitoring units sold, DDAU is one of Brüel & Kjær Vibro’s biggest success stories. DDAU3 is the latest generation that greatly exceeds its predecessors. It is a flexible, state-of-the-art machine monitoring unit with powerful built-in analysis capabilities. DDAU3 is able to perform today’s most demanding condition monitoring and diagnostic tasks. Yet it still ...
-
based in ICELAND
With the increasing demand for clean energy Wind Energy has become the worlds fastest growing electricity generation technology. Vista Data Vision is a powerful software for studying the expected outcome from a Wind Site as well as comparing Wind Turbine"s real performance to the design ...
-
Distributed by MWA Technologybased in UNITED KINGDOM
A turbine measures the speed of flow inside the meter, this is sent to either a mechanical or electronic counter. Our range of turbine flow meters include: Integral 15mm – 110mm meters. Integral V MAXX 90c max. Battery operated, 1.2m Pt100 temperature sensors. Heat meter (EN1434 & MID) with integrated turbine flow ...
-
Manufactured by SOLARC Innovative Solarprodukte GmbHbased in GERMANY
Efficient operation of wind turbines or wind farms requires a long service life of the individual wind turbines. The trend is towards larger and more powerful wind turbines. The increasing size of the new wind turbines leads to a massive load in the form of vibrations for the wind turbine and its components. Vibrations in a wind turbine have a negative impact on their function and ...
-
Manufactured by Nordic Wind Technology ApSbased in DENMARK
The S66 is part of Suzlon’s classic fleet of wind turbines. Production began in 2002 and the S66 was eventually phased out in 2016. During that period a total of 3673.75 MW capacity was installed globally (counting S66, S64 and similar turbines). Suzlon designed the S66 with a dual-rating asynchronous generator and a pitch system that makes the turbine capable of delivering an optimum ...
-
Manufactured by Agile Wind Power AGbased in SWITZERLAND
Vertical Sky® A32, the first 750-kW vertical-axis wind turbine, measures 105m from the ground and meets the stringent international certification requirements for large wind turbines (IEC 61400). The turbine series offers efficiency comparable to standard modern turbines and is especially suited to decentralised electricity production to meet on-site needs. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you