Voltage Monitoring Equipment For Energy Monitoring In Australasia
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Power supply for two 2 wire sensors or transmitters. The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance enables bidirectional HART® communication with SMART sensors and ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Power supply for one 4 wire sensor or transmitter. The power supply has one output for supplying voltage to 4 wire sensors and transmitters. Connection to mono-phased a.c. networks or to two phase conductors of three-phase supply networks (TN-, TT- or IT-networks as per VDE 0100 T 300/IEC 364-3) with 100-240 V AC nominal voltage ...
-
Manufactured by BEPbased in NEW ZEALAND
BEP’s innovative Smart Battery Hub (SBH) is a world-first intelligent battery management system for vessels running two or more outboards, sterndrives, or multiple inboard engines. Smart Battery Hub simplifies battery management with remotely activated switches, automatic dual direction Voltage Sensitive Switching (VSS) and emergency parallel functionality, neatly housed in a robust, ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
The SIRAX BT5100 is a top-hat rail mounted Transducer and used to measure and convert AC Voltage input into an proportional DC current or voltage output signal. Input Voltage and Output Voltage/Current is displayed on LCD and indicated by ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Measuring transducer for the transformation of sinusoidal alternating voltage, with power supply ...
-
Manufactured by DEWESoftbased in SLOVENIA
Dewesoft power analyzer features a high-sampling rate, high-bandwidth, and high-accuracy hardware for power analysis on electric motors, inverters, transformers, switches and any other electronic equipment. The ability to connect other sensors for temperature, vibration, RPM, torque offers a unique solution for modern power analysis ...
-
Manufactured by METREL d.dbased in SLOVENIA
MI 3152H EurotestXC 2,5 kV is an instrument from the new generation of Metrel’s multifunctional measuring instruments. The already well known functions like complete installation safety testing according to IEC/EN 61557 and AUTO SEQUENCE testing of TN and TT earthing systems expanded with insulation resistance measurement with the test voltage up to 2,5 kV are managed by a completely new ...
-
Manufactured by DEWESoftbased in SLOVENIA
Advanced and easy to use solutions for complete electric and hybrid vehicle development, validation and production. The electric motor and inverter testing, battery and battery charge testing, combustion analysis, hydrogen testing and ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 03301, manufacted by R. M. Young, is the wind vane included with our Wind Sentry Sets (03002, 03001). Although some customers have valid applications that require monitoring wind speed only (without direction), monitoring wind direction only (without wind speed) provides little useful information. For this reason, the 03301 is available for two purposes: As a replacement vane for a Wind ...
-
Manufactured by HVPDbased in UNITED KINGDOM
The Transient Earth Voltage (TEV) sensor is a capacitive probe designed to detect local, high‑frequency PD pulses in switchgear, cable sealing ends, machine cable boxes, transformers and other plant. The sensor is very flexible, and can be installed either inside or outside the plant under test. HVPD supply both indoor and outdoor versions of the TEV ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 03002, manufactured by R. M. Young, measures wind speed and direction with a three-cup anemometer and a wind vane mounted on a small crossarm. It interfaces directly with your Campbell Scientific data loggers, so no signal conditioning is ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Measuring transducer for the transformation of sinusoidal alternating voltage, ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Measuring transducer for the transformation of sinusoidal or distorted alternating voltage - with power supply ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Transducer for the conversion of the difference in phase angle from two electrical systems requiring synchronization into a direct current or voltage signal which is proportional to the measured ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Measuring transducer for the conversion of sinusoidal or distorted alternating voltage into an output signal which is proportional to the measured value. Depending upon the variant, the crucial portion of the measuring range can be extended at the beginning or the end (various characteristics). The less crucial or non-crucial portion is ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Demand analysis in any low-voltage system with data recording. The CAM mobile has been designed for mobile analysis in low-voltage power distributions. It provides the following functions to the user: Analysis of the present system state for monitoring and maintenance purposes. Detection of disturbances such as voltage variations or voltage sags. Demand analysis of power distribution, generators ...
-
Manufactured by DEWESoftbased in SLOVENIA
Advanced and easy to use solutions for complete electric and hybrid vehicle development, validation and production. The electric motor and inverter testing, battery and battery charge testing, combustion analysis, hydrogen testing and ...
-
Manufactured by METREL d.dbased in SLOVENIA
The MI 3295 Step Contact Voltage Measuring System is a voltage measuring system intended for testing and verification of protective earthing of power stations, substation and other power systems. The system consists of Station for current generation and autonomous voltage Meter. Due to high test current (up to 55 A) and effective noise cancellation the MI 3295 ensures very accurate and stable ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Application: The devices are designed for measurement in electrical distributionsystems or industrial plants and machines. All parameters may be set onsite. The interfaces Modbus RTU (RS485) or Modbus TCP (Ethernet) areavailable for the connection of the devices to higher-ranking ...
-
Manufactured by Baltec Australiabased in AUSTRALIA
The EC3239 Voltage Divider is designed to monitor medium and high voltage distribution systems and electrostatic processes such as Electrostatic Precipitators. The 0-20 mA proportional current output signal is suitable for monitoring DC voltages up to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you