Wind Turbine Monitoring Equipment For Energy Monitoring In Canada
-
based in USA
GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...
-
Manufactured by AXYS Technologies Inc. (AXYS)based in CANADA
AXYS FLiDAR (Floating LiDAR) WindSentinel systems accurately measure wind speed and wind direction offshore at turbine hub-height and across the blade span for cost-effective wind resource ...
-
based in USA
Building on its exceptional turbine performance and reliability, GE's Class I 1.5-77 wind turbine. GE advanced its original Class I wind turbine, the 1.5-70.5, with increased rotor length, and controls technology resulting in a greater annual energy production. Focusing on performance, reliability, efficiency, and multi-generational product evolution, GE's Class I 1.5-77 wind turbine continues to ...
-
Manufactured by NovaLynx Corporationbased in USA
The 200-WS-23 Current Loop Wind Sensor monitors wind speed and direction. The electronics converts the raw signals from the wind sensors to proportional 4 to 20 mA current loop values for use by process control or monitoring systems. It acts like a variable resistance that draws 4-20 mA when powered with 8 to 30 Vdc. No external power is required because the encoding electronics for wind speed ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 03301, manufacted by R. M. Young, is the wind vane included with our Wind Sentry Sets (03002, 03001). Although some customers have valid applications that require monitoring wind speed only (without direction), monitoring wind direction only (without wind speed) provides little useful information. For this reason, the 03301 is available for two purposes: As a replacement vane for a Wind ...
-
Manufactured by Moventas Gears Oybased in FINLAND
Gain a competitive edge with the Moventas digital service solution. Utilize real-time data to improve your productivity and ...
-
by Innergexbased in CANADA
Clean, renewable wind energy is an ideal alternative to fossil fuels. Wind turbines produce no atmospheric emissions, no harmful waste nor any other type of air or water pollution. And the noise produced by a wind turbine, as measured outdoors close to nearby homes, is no more than 40 dB, which is equivalent to the hum in a ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 03002, manufactured by R. M. Young, measures wind speed and direction with a three-cup anemometer and a wind vane mounted on a small crossarm. It interfaces directly with your Campbell Scientific data loggers, so no signal conditioning is ...
-
Manufactured by Moventas Gears Oybased in FINLAND
The Exeed Evo represents Moventas’ commitment to remain at the forefront of evolving and innovating wind turbine gearbox technology. As wind turbine development reaches new heights, so do the requirements for wind gearboxes. The state-of-the-art Exceed Evo wind gearbox continues to set the bar for the competition with a new high strength planet carrier and optimized journal bearing designs ...
-
based in ICELAND
With the increasing demand for clean energy Wind Energy has become the worlds fastest growing electricity generation technology. Vista Data Vision is a powerful software for studying the expected outcome from a Wind Site as well as comparing Wind Turbine"s real performance to the design ...
-
based in USA
The GE 1.85-82.5 is the turbine of choice for IEC class II winds, and provides over 7% more AEP than the 1.6-82.5 at 8.5 m/s. The 1.85-82.5 turbine is available in tower heights of both 80 and 65 meters. These tower sizes both provide flexible options for Class II wind sites,as well as higher energy capture in a variety of challenging ...
-
Manufactured by Hammond Power Solutionsbased in CANADA
HPS Centurion Energy Efficient Harmonic Mitigating distribution tranformers are rated for 600 volts and below. Typical applications of severe non-linear loading conditions include data centers, internet-service providers, telecom sites, call centers, broadcast centers, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you