Wind Turbine Monitoring Equipment For Energy Monitoring In Europe
-
Manufactured by DEIF A/Sbased in DENMARK
Wind turbine pitch servo drive with integrated safety, distributed I/O and cold climate specifications for robust pitch systems. The IMD-100 is a robust motor drive with integrated safety and distributed I/O to be used as pitch servo drive for wind turbines from kW to MW range. The servo drive has cold climate specifications making it suitable for any wind turbine blade pitch system design. The ...
-
Manufactured by LGS by Texysbased in FRANCE
The fully modular concept of our measurement units allows you to configure and optimize performance and therefore cost according to your specific ...
-
Manufactured by Heliocentris Academia International GmbHbased in GERMANY
Made with professional-grade materials, the Horizon Renewable Energy Trainer allows a semester of high-quality experiments in renewable energy for any laboratory. The included solar energy simulator, projector, and wind turbine provide multiple renewable energy technologies for students to explore. The interactive software, also included, enables complete control of every aspect of the simulators ...
-
Manufactured by AXYS Technologies Inc. (AXYS)based in CANADA
AXYS FLiDAR (Floating LiDAR) WindSentinel systems accurately measure wind speed and wind direction offshore at turbine hub-height and across the blade span for cost-effective wind resource ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES50, with a rotor diameter of 20 meters, is specifically designed for areas with lower wind speed (class III). This two bladed wind turbine, with an new cover, is a reliable 50kW midsize wind turbine with a high performance. The mechanical part of the WES50 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest ...
-
based in USA
GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...
-
Manufactured by Electria Windbased in SPAIN
Medium Power Wind Turbine, Synchronous / Permanent Magnet, Pitch Control, Full Power ...
-
based in USA
Building on its exceptional turbine performance and reliability, GE's Class I 1.5-77 wind turbine. GE advanced its original Class I wind turbine, the 1.5-70.5, with increased rotor length, and controls technology resulting in a greater annual energy production. Focusing on performance, reliability, efficiency, and multi-generational product evolution, GE's Class I 1.5-77 wind turbine continues to ...
-
Manufactured by Leading Edge Turbines Ltdbased in UNITED KINGDOM
Our 500w dump load is utilised to ‘bleed-off’ excess power from your off-grid power system when your battery bank is fully charged. These 500w dump loads are designed to be connected to either our 45A diversion controller or 60A diversion controller working off a 12v or 24v off-grid power ...
-
Manufactured by Siemens Gamesa Renewable Energybased in SPAIN
Multi-megawatt turbines from the Gamesa 2.0 MW platform improve competitive investment ratios per MW installed and Cost of Energy produced due to their versatile combination of a 2.0 MW unit power wind turbine and 5 different sized rotors: 80, 87, 90, 97 and 114 m diameters, to achieve maximun output in all types of settings and wind conditions. The Gamesa 2.0 MW bases its operational ...
-
Manufactured by Brüel & Kjær Vibrobased in GERMANY
With more than 30,000 condition monitoring units sold, DDAU is one of Brüel & Kjær Vibro’s biggest success stories. DDAU3 is the latest generation that greatly exceeds its predecessors. It is a flexible, state-of-the-art machine monitoring unit with powerful built-in analysis capabilities. DDAU3 is able to perform today’s most demanding condition monitoring and diagnostic tasks. Yet it still ...
-
Manufactured by Nordex SEbased in GERMANY
The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical low-wind regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by 20 percent. This translates into a capacity ...
-
Manufactured by Nordex SEbased in GERMANY
The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind conditions. The N100/2500 is one of the largest turbines in the Nordex product line and its yield rates among the highest in its power class. With a rotor sweep of 7,854 square metres, this IEC-2 certified turbine operates particularly profitably in medium and low wind ...
-
Manufactured by ZX Lidarsbased in UNITED KINGDOM
Full IEC Classification, the longest service and warranty period as standard of any Lidar and accepted by DNV GL as a Stage 3 Bankable ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XD115-5MW is designed with offshore application foremost in mind. As such it is the first offshore dedicated multi MW Direct Drive permanent magnet generator wind turbine, based on in-house proven ...
-
based in ICELAND
With the increasing demand for clean energy Wind Energy has become the worlds fastest growing electricity generation technology. Vista Data Vision is a powerful software for studying the expected outcome from a Wind Site as well as comparing Wind Turbine"s real performance to the design ...
-
Manufactured by Sifbased in NETHERLANDS
Our operational division Offshore Steel Structures (OSS) covers a wide range of products including Pin Piles and Jacket Tubulars, supplying offshore foundations components to the booming offshore wind farms market (both for turbines and substations), whilst ensuring energy security by supply to the oil and gas sector. The variety in needs and specifications is substantial, and our experience and ...
-
based in USA
The GE 1.85-82.5 is the turbine of choice for IEC class II winds, and provides over 7% more AEP than the 1.6-82.5 at 8.5 m/s. The 1.85-82.5 turbine is available in tower heights of both 80 and 65 meters. These tower sizes both provide flexible options for Class II wind sites,as well as higher energy capture in a variety of challenging ...
-
by Gridcogbased in UNITED KINGDOM
Solar PV systems generate electricity directly from solar irradiance. Their output is affected by geographical location, local weather conditions, module and inverter characteristics, and orientation and tilt. ...
-
Manufactured by SOLARC Innovative Solarprodukte GmbHbased in GERMANY
Efficient operation of wind turbines or wind farms requires a long service life of the individual wind turbines. The trend is towards larger and more powerful wind turbines. The increasing size of the new wind turbines leads to a massive load in the form of vibrations for the wind turbine and its components. Vibrations in a wind turbine have a negative impact on their function and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you