Wind Turbine Monitoring Equipment For Energy Monitoring
-
Manufactured by Aria srlbased in ITALY
The Libellula wind turbines are equipped with a remote control system, using a Short Message Service (SMS) designed to send and receive messages to/from a control terminal (mobile phone or other GSM connected equipment). The system allows a very simple use even with a mobile phone that can be used in order to receive messages and reports and/or in order to send requests of data or ...
-
by Innergexbased in CANADA
Clean, renewable wind energy is an ideal alternative to fossil fuels. Wind turbines produce no atmospheric emissions, no harmful waste nor any other type of air or water pollution. And the noise produced by a wind turbine, as measured outdoors close to nearby homes, is no more than 40 dB, which is equivalent to the hum in a ...
-
Manufactured by DEIF A/Sbased in DENMARK
Robust pitch controller for responsive positioning of blades, with battery charge and energy monitoring. The DEIF Pitch Motion Controller is based on AWC platform (Advanced Wind Turbine Controller), the controller can be customized with the needed number of inputs and outputs. The pitch motion controller controls the position of each blade, it monitors the energy storage and controls the charging ...
-
Manufactured by Leading Edge Turbines Ltdbased in UNITED KINGDOM
Our 1000W dump load is utilised to ‘bleed-off’ excess power from your off-grid power system when your battery bank is fully charged. These 1000w dump loads are designed to be connected to either our 45A diversion controller or 60A diversion controller working off a 24v or 48v off-grid power ...
-
Manufactured by Freen OÃœbased in ESTONIA
Freen-15 is a wind generator with a capacity of 15 kW. It is designed for on-grid and off-grid energy generation for homes and farms. The vertical ultra-light turbine is effectively operated in multiple regions under variable wind conditions. Patented wing design does not require reconfiguring the turbine to the wind's direction change. Thanks to the low noise level, they can be used on various ...
-
Manufactured by Nordex SEbased in GERMANY
As an all-round turbine in the 2.5 MW product line, the N90/2500 can be deployed at strong-wind sites. With different tower heights, it covers wind class IEC 1. Nordex also offers it with the option of a frequency of 50 or 60 hertz. This makes the N90/2500 a very versatile 2.5 MW turbine and the classic in the series. Hundreds are in operation in various locations with vastly different climates ...
-
Manufactured by Senwei Energy Technology Incbased in CHINA
SWT-10KW variable pitch wind turbine has been installed and used in large quantities in developed countries and regions such as the United States, Austria, Canada, Britain, Ireland, Spain, Denmark, Latvia and so on because of it with it's good performance. This shows that for the small variable pitch controlled wind turbine market, SENWEI brand has been launched much as early as 2015 in the ...
-
Manufactured by Senwei Energy Technology Incbased in CHINA
20kW variable pitch wind turbines are the most commonly used commercial applications in grid-connected systems of wind power generation. Among them, more than 50sets SENWEI-branded wind turbines with variable pitch controlled 20kW were installed in Italy in 2012, and more than 20sets 20kW pitch controlled wind turbines aslo were installed in Italy in 2013, in 2014 and 2015,SWT-20KW and SWT-50KW ...
-
Manufactured by RexCo Technologybased in CHINA
Low start up speed, high wind energy utilization. Amazingly quiet operation with minimal vibration. Easy installation, tube or flange connection optional. New art of precision injection molding blades with aerodynamic shape and structure, high efficiency.. Body of casting aluminum alloy, with 2 bearings swivel makes it stronger.. Patented AC PMG with special stator, effectively reduce torque, ...
-
Manufactured by Electria Windbased in SPAIN
Medium Power Wind Turbine, Synchronous / Permanent Magnet, Pitch Control, Full Power Converter, Directly Connected to Distribution ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 03002, manufactured by R. M. Young, measures wind speed and direction with a three-cup anemometer and a wind vane mounted on a small crossarm. It interfaces directly with your Campbell Scientific data loggers, so no signal conditioning is ...
-
Manufactured by Moventas Gears Oybased in FINLAND
The Exeed Evo represents Moventas’ commitment to remain at the forefront of evolving and innovating wind turbine gearbox technology. As wind turbine development reaches new heights, so do the requirements for wind gearboxes. The state-of-the-art Exceed Evo wind gearbox continues to set the bar for the competition with a new high strength planet carrier and optimized journal bearing designs ...
-
by Aeronesbased in USA
Embrace the innovation in wind turbine blade repair. Robotic tools help wind turbine technicians to perform a large scope of services quick and efficient. Minimize downtime of the turbines and protect your blades of erosion up to Level ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XD140 onshore 4MW turbine is derived from the offshore dedicated XD115 model. With a larger rotor diameter and designed for lower average wind speeds (compared to its predecessor), this turbine brings the benefits of the XD115 design to the onshore locations. The focus remains on fast installation and low maintenance. Hub heights can go from 100m up to ...
-
Manufactured by Orbital A/Sbased in DENMARK
Orbital´s TMC3 wind turbine is designed to stall-regulate wind turbines. A cost effective all-in-one controller ...
-
Manufactured by FuSystems SkyWind GmbHbased in GERMANY
The SkyWind NG is the very first micro wind turbine designed with the same passion and expertise currently known only from large scale megawatt turbines. Key aspects are its high power and durability at comparatively small size and weight. Its patented all metal design provides unique strengh and an unmatchable service life. Every turbine consists of a turbine with rotor and grid inverter (230V ...
-
Manufactured by Amperax Energie GmbHbased in GERMANY
Many years of experience in technical operations management and in servicing various wind turbine manufacturers have flowed into the development of the A3000, which means that a particularly efficient and reliable machine with low maintenance costs could be developed. The Amperax A3000 is state of the art. Thanks to the directly driven permanent magnet generator, a high degree of efficiency can ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XV90-2MW is at this time the smallest turbine in the Darwind product portfolio. The XV90 is a wind turbine with a nominal power of 2MW and a three bladed rotor with a diameter of 90 meters. The standard hub height is 80m and can be raised up to 140m. The sealed nacelle makes the XV90 very suitable for low wind onshore, near shore and desert ...
-
Distributed by Scientific Sales, Inc.based in USA
The Model WS-23 Current Loop Wind Sensor monitors wind speed and direction. The electronics converts the raw signals from the wind sensors to proportional 4 to 20 mA current loop values for use by process control or monitoring systems. It acts like a variable resistance that draws 4-20 mA when powered with 8 to 30 Vdc. No external power is required because the encoding electronics for wind speed ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XD115-5MW is designed with offshore application foremost in mind. As such it is the first offshore dedicated multi MW Direct Drive permanent magnet generator wind turbine, based on in-house proven ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you