Energy Storage Applications

Premium

LowNOx Systems for Nitrogenous Fuels

During the combustion of organic fuels with a high nitrogen content, NOx concentrations of up to several thousand mg or ppm are produced during a normal combustion process. The most efficient primary measure for NOx reduction is the staged combustion, where the combustion air is applied in two or more stages, depending on the ...

By CS Combustion Solutions GmbH based in Wien, AUSTRIA.

Premium

Industrial gas turbines for power generation solutions

Gas Turbine Power Generation ...

By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).

Bulk Fuel Storage

By Steel Tank and Fabricating Corp. based in Columbia City, INDIANA (USA).

Coal storage for the energy industry

CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance ...

By CST Industries Inc based in Kansas City, MISSOURI (USA).

Biogas storage for the bioenergy industry

By United Industries Group, Inc. (UIG) based in Lake Forest, CALIFORNIA (USA).

Hydrogen gas solutions for decarbonising heat industry

Providing heat and cooling to homes and businesses makes up a quarter of the UKs greenhouse emissions and 51% of all energy used in Europe. Providing heat and cooling to homes and businesses makes up a quarter of the UKs greenhouse emissions and 51% of all energy used in Europe. This huge energy demand is usually met by using natural gas, instead of utilising low carbon solutions, such as hydrogen. Hydrogen can be blended with natural gas to decarbonise the gas we use for heating and cooling. By doing this, the ...

By ITM Power based in Sheffield, UNITED KINGDOM.

PVT heat pump panels for Non-residential building

A common problem with the Heat Cold Storage (ATES) is that more heat than cold is extracted from the source, resulting in a cold surplus. This often occurs in care facilities, and can affect the operation and efficiency of the installation. This may cause problems with the issued ...

By Triple Solar BV based in Amsterdam, NETHERLANDS.

Battery Systems for Rail Vehicles

AKASYSTEM is highly regarded for its performance and enhanced charging times. The liquid-cooled system is freely scaleable, meets stringent safety standards and has been the most economical and reliable alternative in the field of e-mobility since its conception. The speed with which these compact, thoroughly durable solutions can be charged makes them ideal for use the mobility requirements of the world of rail ...

By Akasol AG based in Darmstadt, GERMANY.

Filtration systems & solutions for energy sector

Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled ...

By Porvair - Filtration Group based in Fareham, UNITED KINGDOM.

Gas compression in fuel cells

By Gardner Denver Thomas GmbH based in Fürstenfeldbruck, GERMANY.

Energy and telecom cable solutions for automotive industry

Covering all mechanical, electrical and material requirements, Prysmian Group is a leader in material development, production technologies and logistics for the automotive industry. Draka Prestolite Automotive was born from the merge between Prysmian and General Cable and offers to its customers the widest cable and assemblies portfolio for the global automotive industry. The automotive industry keeps on growing at a very high pace in the field of electric and connected autonomous cars. Draka Prestolite Automotive ...

By Prysmian Group based in Milan, ITALY.

Hydrogen solutions for power-to-gas sector

In 2012, GP JOULE developed the power gap filler system to compensate for load fluctuations in the grid resulting from variations in the supply of wind and solar energy. PEM electrolysers convert excess green energy into hydrogen, which can be stored and fed back into the grid as required via a biogas-fired block-type thermal power station. This makes it possible to optimally integrate renewable energies into the electrical grid and offset and compensate for a lack of energy on days when there is little wind or ...

By H-Tec Systems GmbH based in Lübeck, GERMANY.

Lithium-Ion Battery Cell for Smart Appliances

High power or long run-time, take your pick. Every day, millions of people rely on Tenpower’s battery cell to get the job done. So the next time you pick up a gadget infused with the latest technology, remember to LOOK FOR THE BLUE ...

By Jiangsu Tenpower Lithium Co., Ltd. based in Zhangjiagang, CHINA.

Measurement solution for hydrogen fuel cell testing

As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality standards for proton exchange membrane (PEM) fuel cell vehicles. If impurities above ...

By Protea Limited based in Middlewich, UNITED KINGDOM.

Gencell Solutions for Backup Power

In its 2017 Infrastructure Report Card, the American Society of Civil Engineers assigned a “D+” to the US' aging energy infrastructure. Just a few weeks after the report was released, Los Angeles, New York and San Francisco were hit by major power outages on the same day. Mass transit was in chaos as the electrical outages caused the failure of signals and station lights. Office workers were stranded in elevators and hospital operating rooms were shut down. And businesses, factories, and homes went ...

By GenCell Ltd based in Petah Tikva, ISRAEL.

Laboratory and industrial ovens and furnaces solutions for electronics industry

Within the electronics industry manufacturers of ICs (integrated circuits), PCB and semiconductor devices use Carbolite bench top and floor standing ovens for a number of tests to prove their components. The Carbolite Peak series (PN Natural Convection Oven & PF Fan Convection Oven) as well as the GP General Purpose ranges of ovens are used at elevated temperatures over an extended period for burn-in and stress testing of components to detect faults. Carbolite ovens can accommodate both rack and shelf loading. ...

By Carbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM.

Hydrogen solutions for integrated grid sector

Seamless Coordination: Comprising five H-TEC SYSTEMS electrolysis systems each with 200 kW, the hydrogen integrated grid will be installed at suitable wind farms in North Frisia. Excess electricity generated through renewable energy will be converted into hydrogen using PEM electrolysis, then stored locally in pressure tanks and regularly collected at the five locations and delivered to two hydrogen filling stations using a pressure tank vehicle. These hydrogen filling stations supply fuel cell-powered buses used ...

By H-Tec Systems GmbH based in Lübeck, GERMANY.

Hydrogen gas solutions for grid balancing sector

Decarbonising the production of hydrogen, enabling a green transport fuel for trains. The ongoing trend to deploy more renewable power sources is a positive step towards reducing dependency on fossil fuels, but it causes some big issues for electricity grid operators. Balancing the grid is becoming more challenging, because renewables are increasing the temporal mismatch between supply and demand on all timescales. Conventional grid balancing techniques cause CO2 emissions (ramping up a gas or coal power plant), ...

By ITM Power based in Sheffield, UNITED KINGDOM.

Membrane Electrode Assemblies

FuelCellsEtc is well-known for the high quality of our custom Membrane Electrode Assemblies (MEAs). We can produce any quantity of MEAs and have no minimum order requirements. We are equally at home providing any custom loading you may need and can even use your own catalysts, membranes or Gas Diffusion ...

By Fuel Cells Etc based in College Station, TEXAS (USA).

Clean Power for Substations Utilities

Faced with more frequent extreme weather as well as increased demand for electricity, utilities are seeking new alternative technologies that provide clean backup power systems to minimize service disruptions and improve customer ...

By GenCell Ltd based in Petah Tikva, ISRAEL.