Stationary Energy Storage Equipment For Energy Storage In Europe
-
Manufactured by EverZincbased in BELGIUM
With 40 years of experience in the battery zinc powder field, EverZinc has developed a wide range of alloyed zinc powders and zinc oxides designed to meet our customers’ needs. Our unique centrifugal or spinning-disk atomization process allows us to improve alkaline batteries from performance to shelf life, as well as to produce alloyed zinc powder that can be tailored to specific battery ...
-
based in SWITZERLAND
At present, flow cells are generally only known as garage-sized constructions for stationary energy storage in wind turbines and solar systems. But with our nanoFlowcell®, we have managed to bring a flow cell down to the size of a briefcase and at the same time increase the energy density of the electrolytes by a factor of ten. The development of nanoFlowcell® has thus rendered flow ...
-
Manufactured by RIPOSOL GmbHbased in AUSTRIA
Stationary hot water solar-storage tank made of steel sheet in accord with DIN 4753, welded-in smooth-bore heat exchanger on bottom and top. Generously dimensioned heat exchanger and a slim design ensure an optimal layering of the warm water. Corrosion-protected through enameling of storage and heat exchanger as well as additionally implemented magnesium anodes. With pointer thermometer and ...
-
Manufactured by Hystorsysbased in NORWAY
The system is based on a solid-state metal hydride technology and provides safe and compact hydrogen storage at low pressures. It is suitable for stationary energy storage systems in a combination with on-site hydrogen production and fuel cells. At pressure below 30 bar, this technology can store the same amount of hydrogen as high pressure compressed gas storage at 1000 bar (hydrogen ...
-
Manufactured by NPROXX B.V.based in NETHERLANDS
High-density hydrogen storage is a major challenge – NPROXX, has overcome this challenge and can offer a range of applications for the stationary storage of large volumes of compressed hydrogen. This, in turn, enables the establishment of refuelling stations and storage depots – in order to refuel hydrogen powered vehicles of any nature, hydrogen must be stored at high pressures. This ...
-
Manufactured by RIPOSOL GmbHbased in AUSTRIA
Stationary hot water solar-storage tank made of steel sheet in accord with DIN 4753, welded-in smooth-bore heat exchanger on bottom and top. Generously dimensioned heat exchanger and a slim design ensure an optimal layering of the warm water. Corrosion-protected through enameling of storage and heat exchanger as well as additionally implemented magnesium anodes. With pointer thermometer and ...
-
Manufactured by Global Solar Systems GmbHbased in GERMANY
GREENROCK is the safest and most environmentally friendly stationary power storage solution. In contrast to conventional lithium-ion solutions, BlueSky Energy uses a technology based on salt water electrolyte. This is neither flammable nor explosive, safe to touch and absolutely maintenance-free. The salt water power storage is an integrated power storage solution. The salt water battery based on ...
-
Manufactured by Tiamat Energybased in FRANCE
Tiamat designs, develops and manufactures sodium-ion batteries for mobility and stationary energy storage. Stable chemistry for simple, safe, fast and performing ...
-
based in UNITED KINGDOM
Na-ion batteries are ideal for stationary storage applications over a wide temperature range, thanks to their high energy density — both by mass and volume — combined with safety and cost advantages ...
-
by Lux Researchbased in USA
Innovative energy storage is increasingly impacting the world, from mobile applications like electric vehicles, hybrids, and consumer electronics to stationary uses like peak shaving, distributed storage, and backup. Stringent emissions regulations and new grid energy storage mandates are leading to increased adoption of energy storage. These drivers create opportunities for innovative companies ...
-
Manufactured by GES - Green Energy Storagebased in ITALY
GES devised a hydrogen battery based on a hybrid system with hydrogen plus a patented liquid electrolyte: the battery produces the necessary hydrogen for a charge/discharge closed loop. In addition to this, R&D activities have successfully led to the improvement of another redox couple for a classic liquid/liquid flow battery, also covered by a patent. Our expertise in computational chemistry ...
-
Manufactured by Verkorbased in FRANCE
As an expert in the manufacture of low-carbon batteries, Verkor will produce two types of battery cells in its Gigafactory: large battery cells, known as pouch cells; smaller-sized cylindrical cells (size form 2170 and up). The cells are then assembled into modules for delivery to clients. Verkor has chosen to focus on high-volume battery-cell manufacturing for the electric vehicle and ...
-
Manufactured by Sera GmbHbased in GERMANY
With sera power-to-gas compressor units, innovative system solutions can be created for converting renewable energy into hydrogen for use in a range of applications. Direct use of green hydrogen in mobility and transportation is just as feasible as buffering in storage facilities and direct supply into the natural gas grid or H2 pipelines. Power-to-gas energy storage can help to balance out ...
-
Manufactured by Morrow Batteries ASAbased in NORWAY
We will be among the first European suppliers of LFP batteries. Our LFP product is significantly cheaper than NMC, making it ideal for stationary energy storage ...
-
Manufactured by Altris ABbased in SWEDEN
LFP (Lithium Iron Phosphate) is the dominant large scale battery chemistry today. NCM/NCA (Nickel Cobalt Manganese/Aluminium) offer the highest energy-density. Fennac brings superior safety, high power capabilities, wider operating temperature range and abundant raw material ...
-
Manufactured by Vanadis Power BVbased in NETHERLANDS
ReFlex™ is our unique and sustainable battery, for commercial, industrial and utility-scale energy storage. It is a modular product, that can be scaled from 10 kilowatt to 100 megawatt. ReFlex™ is a Vanadium Flow Battery (VFB) for stationary energy storage. A multi-million-dollar development programme resulted in this unique and patented product. With close to 1,000,000 hours of ...
-
Manufactured by Manz AGbased in GERMANY
Energy has to be ready when it is needed. For that reason, the high volatility of power grids must be balanced by an increasing percentage of renewable energy. This creates increasing demand for load balancing technologies and for intelligent, high-performance battery storage ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you