Thermal Energy Storage Equipment For Energy Storage In Europe
-
based in NORWAY
Energy Nest’s thermal energy storage is perfectly suited for industries operating processes at temperatures between 150°C and 400°C. The storage may be used for a range of applications -- including storage of recovered waste heat, benefiting from low-cost grid power to produce heat for later use, reducing the impacts of cyclic loads, and providing emergency ...
-
based in ITALY
A simple, cost-effective and reliable process. The CO2 Battery is a long duration and large scale energy storage system based on a thermodynamic process that efficiently stores energy by manipulating CO2 under different state conditions in a closed thermodynamic transformation. The CO2 Battery can operate in charging mode (absorbing power from the grid) and discharging mode (returning power to ...
-
based in FINLAND
A “sand battery” is a high temperature thermal energy storage that uses sand or sand-like materials as its storage medium. It stores energy in sand as heat. Its main purpose is to work as a high-power and high-capacity reservoir for excess wind and solar energy. The energy is stored as heat, which can be used to heat homes, or to provide hot steam and high temperature process heat ...
-
Manufactured by Croda Energy Technologiesbased in UNITED KINGDOM
CrodaTherm 32 is suitable for use in HVAC applications to reduce operating costs of new and exisiting installations. Its low flammability increases safety and it has an excellent sustianability profile as it is derived from bio-based sources. These properties are matched by excellent and consistent product performance, which is stable in stationary applications, unlike other phase change ...
-
Manufactured by MAN Energy Solutions SEbased in GERMANY
MAN MOSAS - shaping the future of renewable energy. Molten salt energy storage (MAN MOSAS) is an economical, highly flexible storage solution for a wide range of applications throughout the energy ...
-
Manufactured by Sigma Energybased in GREECE
The Sigma solar house provides heating - cooling without fossil sources. A very friendly enviromental solution. Passive Solar Heating is the most cost effective means of providing heat to buildings. In general terms, the amount of solar energy that falls on the roof of a house is more than the total energy consumed within the ...
-
based in FINLAND
Energy storages are an essential part of modern energy systems. Polar Night Energy heat storages provide a way to be prepared for the clean energy transition and highly altering energy prices. ...
-
Manufactured by Croda Energy Technologiesbased in UNITED KINGDOM
CrodaTherm 24W is a unique phase change material in the CrodaTherm brand, whereby it exhibits a wide melting and crystallisation profile. This provides a thermal transition that is typically broader than other CrodaTherm PCMs, providing an excellent solution in applications with an temperature range between 18-24 ºC. Such a temperature profile is suitable for thermally regulated packaging in ...
-
based in NORWAY
Concentrated solar power plants currently rely on molten salt technology for storing thermal energy. But this is a complex and costly technology. EnergyNest offers promising solution for cost reduction. Parabolic trough plants operating with thermal oil (such as Dowtherm A and Therminol VP-1) will benefit from up to 60% lower CAPEX and up to 75% lower OPEX for their thermal storage system. ...
-
Manufactured by Evapco Inc.based in USA
The Extra-Pak Ice Coil by EVAPCO represents the first major technological advancement of thermal storage systems equipment in many years. EVAPCO ice coils are constructed of high quality steel and hot dip galvanized after assembly. These high efficiency ice coils are suitable for all types of large, energy saving, thermal storage systems with field constructed concrete tanks. EVAPCO has developed ...
-
based in ITALY
STEM® (Solar Thermo-Electric Magaldi) is a patented concentrating solar technology, which uses a mirror system to concentrate the sun's light energy on a receiver and convert it into heat. The heat can be used to power industrial thermal processes or to drive steam turbines to produce electricity. The STEM® technology contains a TES (Thermal Energy Storage) system directly ...
-
Manufactured by Euro Green Energy (ECE)based in ROMANIA
Energy storage enables you to manage when and how your energy is used. Energy Storage Systems (ESS) have emerged as a promising, versatile technology that can provide solutions to many electric-grid challenges. Without the ability to store large amounts of energy, conventional power systems have been reliant on matching supply and demand in real-time. However, with recent advances in storage ...
-
Manufactured by Croda Energy Technologiesbased in UNITED KINGDOM
CrodaTherm 5 is our best selling phase change material for temperature controlled packaging solutions. Its unique thermal profile with sharp melting and crystallisation peaks protects goods by keeping them at a constant temperature. The bio-based and non-corrosive nature of the material also means packages are safer and more sustainable versus paraffin and salt-hydrate ...
-
based in NORWAY
Remote areas such as islands and off-grid mining sites with substantial renewable energy production will inevitably face occasional peaks of renewable power that cannot be directly consumed or traded. This excess energy must therefore either be stored or curtailed. EnergyNest offers a highly valuable storage solution when a local demand for thermal energy exists (whether for district heating, ...
-
based in GREECE
Synchronization of heat availability (e.g. waste or solar heat) and thermal processing production needs, is usually an uneasy puzzle to solve. Low cost & high efficiency heat storage in most such cases, remains the key in order to utilize large quantities of available -otherwise wasted- heat in a (pre)production process. PCM (Phase Change Materials) TES (Thermal Energy Storage) tanks or ...
-
Manufactured by Energy Technology Centre Ltdbased in UNITED KINGDOM
Energy storage is recognised as a key enabling technology for the large scale deployment of intermittent renewable energy systems at a local and national ...
-
Manufactured by Croda Energy Technologiesbased in UNITED KINGDOM
CrodaTherm 60 is used in battery thermal management and industrial heating systems to increase the thermal potential of heat management systems when capacity is limited. Peak thermal loads can be managed more effectively, and heat can be recovered to be used elsewhere. In passenger cars, heat can be reused to heat the cabin, whilst in buildings heat can be used to heat offices if HVAC systems ...
-
by Synhelion SAbased in SWITZERLAND
Synhelion uses solar heat to convert CO2 into synthetic fuels – so-called solar fuels. Solar radiation is reflected by the mirror field, concentrated onto the receiver, and converted into high-temperature process heat. The generated heat is fed to the thermochemical reactor that produces syngas, a mixture of H2 and CO. The syngas is then processed by standard gas-to-liquids technology ...
-
Manufactured by Solex Thermal Sciencebased in CANADA
Powering the next generation of energy capture, storage and recovery. The energy sector is undergoing massive and exciting changes, with new renewable and alternative energy technologies becoming increasingly mainstream. With these innovations come new problems to be solved, from the need to reduce costs and improve commercial viability to handling higher temperatures and introducing new working ...
-
based in GERMANY
Kraftblock is a high density thermal energy storage. Its core technology is a uniquely designed material with a great combination of thermal conductivity and high specific capacity. Electrical energy can be transferred to thermal energy in a simple yet highly efficient process. Kraftblock storages will buffer energy in a commercially viable, eco-friendly and absolutely safe way. As soon as the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you