Fossil Energy Applications available in Andorra
-
Premium
Water Treatment Equipments for Power Industry
Drought in association with competing uses for clean water are continuing to challenge power generation facilities worldwide. In addition to this fact, power generation companies face additional challenges including finding innovative ways to be more operationally efficient while meeting tighter environmental standards and ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Incinerator solutions for the pharmaceutical sector
Pharmaceuticals are now shown to be found in surface, ground, and drinking waters around the world. This could create some potentially damaging environmental effects. Minuscule concentrations of chemicals known as endocrine disruptors, often found in pharmaceuticals, are having detrimental effects on aquatic animals and possibly on human health and ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Gas detection in energy industry
Gas detection requirements for power generation can vary widely based on the fuel source, which includes coal, oil, natural gas and nuclear. Regardless of the type of power facility, gas, fire and other hazards pose significant risk to employee safety and also can disrupt the supply of energy to commercial and residential customers. At Teledyne Gas and Flame Detection, our wide range of gas detection products meets the needs of all forms of power generation. Our century of experience, combined with advanced system ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Power Generation Solutions for Refinery Gases Sector
Solar Turbines’ modular, industrial gas turbines can integrate combined heat and power (CHP) allowing significant energy efficiency improvement. Refineries and petrochemical plants have the need to become integrated, energy efficient and sustainable. One benefit of the gas turbine solution is that streams can be used independently or blended together when the refinery production varies, and various gas producers/consumers come online or offline. This capability enables customers to reduce flaring and improve ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Industrial gas turbines for power generation solutions
Gas Turbine Power Generation ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for racing
Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Asphalt production - monitoring solutions for process optimization & energy saving
Asphalt plants deal with a harsh environment and are subject to great mechanical and thermal constraints. Process monitoring and optimization is becoming an increasingly important issue for plants, especially in terms of energy savings. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Ultrasound measurement instrumentation solutions for cleaning mechanisms sector
Ultrasonic cleaning relies on the mechanical agitation from sound pressure that disrupts the surface boundary layer to allow particles to detach and flow into the bulk ...
By Onda Corporation based in Sunnyvale, CALIFORNIA (USA).
-
Premium
Gas monitoring for power generation applications
Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’ ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Processing of Alternative Fuels for the energy industry
RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration ...
By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.
-
Premium
Machine condition monitoring for biofuels
Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Machine condition monitoring for municipalities
Overview Cities and towns are often responsible for maintaining critical assets such as water and wastewater treatment facilities and power generation plants. Oil analysis on this critical equipment as part of a robust maintenance program is a very cost effective way of failure avoidance. Additionally, greater emphasis on environmental conservation and a focus on delivering critical services while operating under reduced budgets leads municipalities to activate these programs. Spectro oil analysis solutions are ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
International testing for biofuels
Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges. ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Senix toughsonic sensor used to monitor lubricant oil tanks application
Automotive lubricants are the substance used to reduce the friction between the moving surfaces of the machine, leading to the reduction in generated heat. The increase in demand of automotive lubricants is attributed to the fact that lubricants increase the average age of vehicles by improving and maintaining engine efficiency. The increasing demand for engine oils, brake fluids, and transmission fluids among both consumer and commercial automobiles is contributing to a growing lubricant market. High engine oil ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Heat Exchangers Solutions for Fine Chemicals Sector
The fine and speciality chemicals sector often deal with high-value products, expensive raw materials and high capital costs. In this environment product integrity and process efficiency are paramount. The production of compounds for use in everything from paints and pigments to fuels and additives, pesticides to cosmetics and toiletries requires high standards of security and quality control. The exact requirements will depend on the chemicals involved and their properties. Some single substances will require ...
By HRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM.
-
Premium
Gas monitoring during industrial process
EM-5 CEMS Coal power plant: Entrance of SCR denitration device, NOx O2 Exit of SCR denitration device: Measure remanet NH3 after reaction and avoid blocking by crystallization, NH3; Calculate denitrification rate with Nox input, NOx O2 Gas-fired power plant: Counting tail gas emission and realtime concentration, NOx O2 SO2 Temperature pressure flow dust ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Syngas Analyzer Applys in Gasifier
Coal gasifier: The coal gasifier can be divided into four modes by the movement pattern of the coal in the gasifier: fixed bed (moving bed), fluidized bed, entrained bed and molten bed. While it can be summarized to atmospheric and high pressure styles according to the gasification operating pressure. Based on the feeding method, the coal gasifier contains solid and liquid feeding manners. In the light of the residue-discharge mode, it can be classified into solid and liquid patterns. In industry, the typical ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Emissions Flow
Achieving Accurate Gas Flow Measurements in Challenging Applications with Optical Flow Sensors (OFS) OFS measures instantaneous average velocity along a straight line which stretches across the stack or pipe. OFS works by clocking the speed of shadows which pass thru that line. OFS works like a tachometer watching shadows pass bye two detectors ...
By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA).
-
Premium
Power generation solutions for steel product gases sector
Solar Turbines has unique experience with steel gases with dozens of coke oven gas (COG) fired gas turbines packages in combined cycle or cogeneration plants installed from 2006, reaching 1,000,000 operating hours in the first decade. The lessons learned from this experience, relating to the availability and reliability of the COG fleet, eventually validated the technical solution implemented for the Solar COG gas turbines packages. Along the steel manufacturing process, various secondary fuel gases, sometimes ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you