Fossil Energy Applications available in Libya
-
Premium
Determination of aromatic hydrocarbons in electrical insulating oils
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Water Treatment Equipments for Power Industry
Drought in association with competing uses for clean water are continuing to challenge power generation facilities worldwide. In addition to this fact, power generation companies face additional challenges including finding innovative ways to be more operationally efficient while meeting tighter environmental standards and ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Machine condition monitoring for aviation, aerospace & airlines
Overview Oil analysis has long been practiced for aircraft engines and other airborne oil-wetted systems such as hydraulic systems and gear boxes in helicopters. Military organizations are perhaps the number one users of oil analysis testing and commercial aviation also has a long history of oil analysis. A number of airlines throughout the world do their own oil analysis, but in many cases they send samples to commercial oil laboratories. Engine manufacturers also do oil analysis as part of engine development ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Gas monitoring during industrial process
EM-5 CEMS Coal power plant: Entrance of SCR denitration device, NOx O2 Exit of SCR denitration device: Measure remanet NH3 after reaction and avoid blocking by crystallization, NH3; Calculate denitrification rate with Nox input, NOx O2 Gas-fired power plant: Counting tail gas emission and realtime concentration, NOx O2 SO2 Temperature pressure flow dust ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Power generation solutions for pulp and paper production industry
The pulp and paper industry requires large amounts of power and heat in forms of hot air and steam. Solar’s best pulp and paper energy solutions use gas turbine-based cogeneration, better known as Combined Heat and Power (CHP). Cogeneration and CHP installations can reduce our customers’ carbon footprint and reduce energy consumption in pulp and paper production. Estimate your annual operatings savings for your plant using our value estimating ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for engine testing and development
Engine manufacturers use Spectro Scientific oil analysis instruments to assist in engine testing during new product development, testing engines during manufacturing run-in, and for qualifying new lubricants. Engines include: Gasoline and diesel automobile engines. Truck and other high speed diesel engines. Medium speed diesel engines such as those used for locomotives, marine and power generation. Extremely large low speed diesel engines for marine propulsion and power generation. Motorcycle engines. High ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Visual inspection solutions for power generation industry
Medit provides non-destructive inspection products and solutions including video borescopes, fiberscopes and pipe cameras for key power generation applications, including those for fossil fuels, nuclear energy, and renewable energy transmission and distribution. Our reliable, advanced inspection solutions, and support, enable power generation customers to maximize efficiency, minimize downtime and enhance productivity with unyielding ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Air pollution control for the renewable natural gas (RNG) industry
The effective utilization of renewable energy sources is crucial to the global transition away from fossil fuels. At Anguil, we offer quality engineered pollution control solutions that ensure the byproducts of the bioenergy production processes are not offsetting the benefits of these crucial initiatives. Our designs account for process flexibility and ease of maintenance to ensure compliance with strict industry standards while minimizing carbon footprints. Because of this, our holistic solutions are ideal for ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Premium technologies for the biogas sector - biogas/biomethane
Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Process instrumentation and analytics solutions for power industry
Siemens has a wide portfolio of products for process instrumentation, weighing and process analytics. Our solutions make it possible to economically address the growing energy demand as well as expanding environmental and safety ...
By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).
-
Premium
Senix toughsonic sensor used to monitor lubricant oil tanks application
Automotive lubricants are the substance used to reduce the friction between the moving surfaces of the machine, leading to the reduction in generated heat. The increase in demand of automotive lubricants is attributed to the fact that lubricants increase the average age of vehicles by improving and maintaining engine efficiency. The increasing demand for engine oils, brake fluids, and transmission fluids among both consumer and commercial automobiles is contributing to a growing lubricant market. High engine oil ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Borescope for Power Generation and Turbine Components Inspection
Turbines and generators are essential pieces of machinery that need to be adequately maintained and repaired to ensure maximum service life and safety. Non-destructive remote visual inspection with a video borescope is a cost-effective and efficient way to inspect without having to disassemble a turbine. Steam and gas turbines run at extremely high pressures, and they need to be kept in good mechanical shape to do their jobs ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Asphalt production - monitoring solutions for process optimization & energy saving
Asphalt plants deal with a harsh environment and are subject to great mechanical and thermal constraints. Process monitoring and optimization is becoming an increasingly important issue for plants, especially in terms of energy savings. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Power Generation Solutions for Marine Power Sector
Solar Turbines provides best-in-class energy solutions with turbomachinery for power generation. In the marine industry, our wide range of solutions will maximize availability, reliability and value throughout the life of your vessel's propulsion ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Electronic fuel control valves solutions for oil and gas industry
Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Processing of Alternative Fuels for the energy industry
RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration ...
By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.
-
Premium
Gas monitoring for power generation applications
Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’ ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Reciprocating Engine Generators Application Note
Reciprocating Engine Generators are a trusted method of providing reliable electric power for small-to medium-scale operations.Driven by the benefits of lower costs and risks, gas-powered reciprocating engines are increasingly being used in place of combined-cycle gas turbine power plants.While the reciprocating engines deliver greater flexibility, especially with regards to the use of renewable fuels such as biogas, they still require precise gas monitoring to ensure emissions limits are met.AMETEK Land’s ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Power generation solutions for food and beverage industry
Solar Turbines provides energy solutions with our gas turbines for power generation, and has extensive experience in the food and beverage industry. Our cogeneration products will increase reliability, efficiency and uptime, avoiding production downtime for your brewery, distillery or food processing plant. With the purchase of our products, Solar offers lifecycle support with one of our Long-Term Service options. Using our combined heat and power technology, Solar can help produce steam for your operations and ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you