Only show results in Texas? Ok

Fossil Energy Applications

  • Hydrogen solutions for integrated grid sector

    Seamless Coordination: Comprising five H-TEC SYSTEMS electrolysis systems each with 200 kW, the hydrogen integrated grid will be installed at suitable wind farms in North Frisia. Excess electricity generated through renewable energy will be converted into hydrogen using PEM electrolysis, then stored locally in pressure tanks and regularly collected at the five locations and delivered to two hydrogen filling stations using a pressure tank vehicle. These hydrogen filling stations supply fuel cell-powered buses used...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Hand Held Analyzer for Measuring Combustion Efficiency & Emissions from a Sugar Mill as a Cogeneration Process

    For many years, sugar mills have burned bagasse, the fibrous byproduct of the processing of sugarcane, using special boilers that produce the steam needed to help break down the sugar cane. As the cost of powering this equipment by burning fossil fuels has steadily risen, the use of biofuel cogeneration as a source of power production has become more prevalent. Many sugar mills have updated their bagasse-fired boilers and linked them to generators that produce electricity used to power the mill’s operations...

    By E Instruments - Sauermann Group based in Langhorne, PENNSYLVANIA (USA).

  • Hybrid Power Systems for Construction Industry

    Firefly’s hybrid power systems help construction sites reduce the runtime of traditional diesel generators, delivering a significant reduction in fuel consumption, noise, as well as CO2, NOx and PM emissions.

    By Firefly Hybrid Power Ltd based in East Kilbride, UNITED KINGDOM.

  • Renewable energy for industrial applications

    We provide renewable energy for industries to the benefit of their environmental report. Industries targeting environmental footprint reductions will benefit from our technology for sustainable energy production based on biomass. Our patented gasification process has world class low air emissions, which ensures sustainable energy production with minimum impact on the local air environment. Our agile process regulation allows steam production to change according to alternating industrial processes in e.g. batch...

    By Dall Energy based in Hørsholm, DENMARK.

  • Gencell Solutions for Off-Grid Power

    1.1 billion people lack electricity for lighting, telecom, cooking, clean water & economic development. 84% of them live in rural areas beyond the grid where they face distinct disadvantages in education, health, and quality of life. The GSMA estimates that by 2020, 390,000 telecom towers will be off-grid, and 790,000 that are in poor-grid locations. Powering these towers is a complex challenge.

    By GenCell Ltd based in Petah Tikva, ISRAEL.

  • Automation Solution for All Process Industries

    Many pharmaceutical and medical device manufacturers see unparalleled demand for quality improvement in product innovation as well as better manufacturing operations and cost control. Control Southern brings operations and technology solutions developed and implemented specifically for the life sciences.

    By Control Southern based in Suwanee, GEORGIA (US) (USA).

  • Automation Solution for Power

    Whether the project involves an established plant or completely new construction, Control Southern can help deliver a safer, more productive facility. Turn to us from the digital prototyping of power generation equipment all the way to the design and implementation of production lines across a wide variety of power generation modalities. In your power generation business, there is an increasing level of unpredictability in day-to-day operations. The combination of more renewables and cheaper gas has altered your...

    By Control Southern based in Suwanee, GEORGIA (US) (USA).

  • Geared, gearless and multistage turbo blowers solutions for landfill biogas blowers industry

    Lone Star Blowers are Designed Specifically for Landfill or Digester Biogas Applications. Experience matters and Lone Star offers a robust system with the right blower technology by engineering specific materials, coatings, gas seals and controls to ensure a successful project. We have the highest pressure up to 30 psi delta pressures and wide flow ranges to provide our systems meet the process demands.

    By Lone Star Blower, Inc. based in Houston, TEXAS (USA).

  • Gasification technology solutions for changing regulatory landscape sector

    UK’s approach to waste management has been shaped by regulations and pressures imposed by the EU. This will not change post Brexit.

    By Eqtec PLC based in Mahon, IRELAND.

  • Fuel Cells

    Hiden gas/vapour analysers, optimized specifically for fuel cell research, offer a number of key benefits over other analysis techniques: rapid response (critical for temperature programmed studies), wide dynamic range, repeatability and linearity, are all of the up most importance when analyzing processes - particularly those in the presence of hydrogen - with widely varying gas concentrations. These features provide for accurate, stable and reproducible analysis of low molecular weight species, over a wide...

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • Catalyst Monitoring Services

    Catalyst monitoring services use periodic performance testing and lab analysis to track the condition of newly installed catalyst. The goal is to extend the life of the catalyst and it begins by establishing a relationship between operating hours and the catalyst’s condition and performance. Testing and analytical services reveal any decline in performance, direct catalyst maintenance services such as chemical washing, and provide a basis for estimating catalyst life. The scope of catalyst monitoring is scaled...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Engineering services for thermal systems and biomass industry

    Comprehensive development and test facilities for a range of thermal power and heat transfer systems are available at Energy Technology Centre.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Solutions for the environment industry

    During the many years that we have worked together with the companies in the precipitator frontline, we have had the possibility to gain experience how to develop and produce customer specified products for cleaning of combustion gas. We can give advice regarding design, dimension, and choice of material. We have modern and efficient machinery for production of emitting electrodes and bag cages. A thorough guidance of quality is a must to be able to meet the customer`s demand. Our resources and production enables...

    By Ewes AB based in Bredaryd, SWEDEN.

  • Oilfield Power Systems for Oil & Gas Industry

    Flared gases and NGLs can be re-purposed as fuel for flex-fuel, low-emissions LPP Combustion Power Systems, lowering production costs, reducing logistical burdens, and addressing Gas Capture Plan and other compliance issues with flaring and emissions. The ‘Lean, Pre-mixed, Pre-vaporized’ (LPP) equipment enables clean combustion of liquid fuels in gas turbines and industrial boilers and burners. In addition to flare-gas NGLs, the LPP Combustion Oilfield Power System also operates on a variety of...

    By LPP Combustion, LLC based in Columbia, MARYLAND (USA).

  • Turbine machines for aerospace industry

    The aerospace programme is one of the pillars of PBS Velká Bíteš. We have been designing and manufacturing aircraft equipment and devices for over 45 years. Thanks to the experience obtained, the development team, in collaboration with the production personnel, is able to address customers requirements in the modifications of both existing and new products.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Coal Fines Drying

    Created during the crushing and drying phases of coal mining, coal fines (particles smaller than 6mm) not only present disposal issues, they can pose a health hazard to personnel and a contamination risk to the site. However, if processed correctly, coal fines can be converted into a fuel source making them a valuable commodity. It is estimated that coal fines, once properly processed, could satisfy more than 5% of the U.S. yearly demand for coal. Control costs, raise profits, and protect the environment by...

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Fly Ash Drying

    In tune with industry trends, public scrutiny, government regulation, water constraints, etc., coal power plants here and abroad are striving to eliminate their ash ponds and replace them with dry solutions. If you are considering a transition from wet to dry ash handling, Vulcan® Systems can help. Vulcan® Fly Ash Drying Systems are custom-designed and manufactured to suit the customer's individual project needs.

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Biogas boosting in biogas plant

    Biogas blower used to boost the biogas from the reactors to a pressures suitable for feeding to biogas burner or biogas engines.

    By Environmech Sdn Bhd based in Balakong, MALAYSIA.

  • energy conservation

    Liquid catalyst saving consumption of fuel sources like coal, liquid gas, bio fuel,etc

    By Energix Solutions based in jhb, SOUTH AFRICA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you