Ash Management Equipment For Fossil Energy
-
Manufactured by United Conveyor Corporation (UCC)based in USA
EXCEN-CRUSHER® Clinker Grinders are specifically designed for both wet and dry bottom ash applications, offering superior performance and high-level reliability. With decades of proven experience, UCC clinker grinders effectively reduce material size providing higher efficiency in pneumatic, hydraulic and mechanical bottom ash handling systems. With thousands of units in service, UCC ...
-
Manufactured by Igniss Energybased in POLAND
Material recovery is a source of income for an incinerator. The recovered materials are mostly in the ash of the combustion chamber, or in the flue gas. The evaporation temperature and the melting temperature of the component is defining if it stays in the ash or it will travel with the flue gas to the filters and the ash ...
-
Manufactured by Burmeister & Wain Scandinavian Contractor A/S (BWSC)based in DENMARK
Competitive solutions and proven technologies based on decades of development and experience. BWE offers a wide range of biomass boilers for a variety of bio fuels. The boiler designs are based on proven technology and optimized for power production. Elevated steam parameters combined with state-of-the art combustion systems is your guarantee for reliable solutions and high plant ...
-
Manufactured by Maskinfabrikken REKA A/Sbased in DENMARK
HKRST 10N boiler burns almost any material: Grain, grain waste, shavings, wood chips, coal, straw, wood pellets etc. up to 30% moisture. The boiler is designed as a reversing chamber boiler with closed end, insulated with A-batts and covered with aluminum zinc / plastisol coated steel ...
-
Manufactured by Facultatieve Technologiesbased in NETHERLANDS
Advanced and reliable. Contributes to a safer, healthier and cleaner work place. Complies with the specifications of the European standards. Manufacured to suit the client's requirements. Minimises the accoustic noise transmission. All parts are easy accessed for ease of maintenance. Fully integrated dust suppression system. Fully automatic. A pre-set timer ...
-
Manufactured by Heizomat Gerätebau- Energiesysteme GmbHbased in GERMANY
The very special features of this boiler series are that the high temperature combustion chamber is integrated into the boiler body and thus the radiant heat of the fireclay bricks is diverted to the boiler water. The moduating boiler has combustion chamber cleaning with an ash removal paddle and automatic cleaning of the heat exchanger tubes with de-ashing auger. The possible operating modus is ...
-
Manufactured by Facultatieve Technologiesbased in NETHERLANDS
Fast and efficient ash processing times – 2 minutes. Minimum handling of ash, cremator ash pan straight to urn. Separates metal parts automatically. Ensures 100% of ashes 3.2 mm or less. Accepts cremated remains directly from the cremator. Highly automated design. Computerised controls. Robust fabrication, with a pleasing aesthetic appearance. Low noise design. Designed for ease of ...
-
based in NETHERLANDS
The High Temperature Winkler (HTW) technology is the most highly developed gasification technology utilizing bio-based feedstocks. The process was originally developed in the 1920s by the German energy company Rheinbraun AG utilizing lignite coal. Over the years, the technology has been significantly improved to achieve better results and has been re-engineered to handle a broad range of ...
-
Manufactured by Zhengzhou Dongding Drying Machinerybased in CHINA
The coal ash drying machine is mainly used for drying industrial dust and waste residues such as fly ash, slime, lignite, raw coal, desulfurization gypsum, phosphogypsum, titanium gypsum, sludge, compound fertilizer and other materials with large water content and certain viscosity. ...
-
Manufactured by Indutechbased in GERMANY
PMD® 2500 is leading in Microwave Transmission Moisture Measurements. It is able to measure low layers down to 10 mm and high layers up to 5000 mm (dependent on the material) with highest reliability and accuracy. With different sensors the PMD® 2500 is used for a wide range of applications at conveyor belts, chutes, dryers, silos, pipes, etc.. to determine moisture, carbon in ...
-
Manufactured by Uttamenergy Limitedbased in INDIA
Palm waste / Napier grass fired boilers are unique single pass design developed by Uttamenergy for challenging fuels like empty fruit bunch, palm fiber, wood barks and napier grass. These fuel types typically have a higher alkali content which has a sticky nature resulting in fouling of boiler heat exchangers. The combustion room is spaciously sized with a sufficient cooling area to minimize ...
-
Manufactured by Zibo Chenyi Wear-resistant Material Co., Ltd.based in CHINA
The special ceramic piece is embedded in the special rubber by vulcanization to form a wear-resistant rubber-ceramic composite lining plate, which is then fixed on the inner shell steel plate of the device by welding, bolting or pasting to form a strong and cushioning anti-friction layer. It is widely used in coal handling, ash discharging systems of thermal power plants and silos and hoppers in ...
-
Manufactured by Fujian RuiSen New Materials Co., Ltd.based in CHINA
A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental conditions, also can be used in normal environmental ...
-
by REMEX GmbHbased in GERMANY
HMT stands for hydro-mechanical treatment. By means of a washing plant, the environmental quality of the incinerator bottom ash aggregate is verifiably enhanced. The pollution levels are reduced as both the sludge fractions and light organic components are removed. The remaining sandy and coarse fraction is proportionally mixed and provided with an additive. The result is GRANOVA aggregate ...
-
Manufactured by CKICbased in CHINA
5E-AF4105 Ash Fusion Determinator is used to determine ash cone deformation temperatures in coal ash, biomass ash and mold powders automatically, which are critical to the boiler functioning properly and to avoid slagging and ...
-
Manufactured by Zakłady Maszynowe Hamech Sp z o.o.based in POLAND
This device is intended for gasification (gas production) of wood, its production waste or wood-based fuels. Then the obtained gas can be used in heating – through combustion in central heating boilers, or in electric energy generation – when cleaned, it is delivered to combustion engines that drive electric generators. Chunk wood or wood chips, sawdust, wood waste from furniture ...
-
Manufactured by CECO Environmentalbased in USA
Through years of experience and knowledge, we have patented innovative technologies designed to reduce nitrogen oxide (NOx) emissions for new or existing coal, oil, and gas fired boilers. Our CCA brand Low-NOx Burners (LNB) are configured to stabilize the combustion process and allow the unit to be operated at lower excess O2 by utilizing a flame stabilizer. To enhance the NOx reduction ...
-
Manufactured by BEA Institut für Bioenergie GmbHbased in AUSTRIA
The 5E-AF4105 Ash Fusion Determinator is an automatic instrument for the determination of the ash fusion of solid fuel ashes like biomass, coal and coke, solid recovered fuels etc. The high resolution optics enables a perfect observation during heating of the sample. An advantage for the determinaton of the tricky ash derformation ...
-
Manufactured by EPA Technologies LLCbased in USA
Provides .3 MMBtu/hr combustion capacity: 30-50 lb/hr (14-23 kg/hr) of average HHV of 5000-8500 Btu/lb wastes. Batch Only Operation: 9-10 ft3 (208 L) per 4-6 hr. (Ships skid mounted & fully ...
-
Manufactured by Geohellas S.A.based in GREECE
Geohellas offers custom solutions to those industries whose processes include steps of purification of gas effluents prior to the release to the Environment. Applications include: desulfurization of gases, fly ash purification, decomposition of NOx gases, industrial food air filters and many ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you