Coal Combustion Applications in Europe
-
Premium
Process instrumentation and analytics solutions for power industry
Siemens has a wide portfolio of products for process instrumentation, weighing and process analytics. Our solutions make it possible to economically address the growing energy demand as well as expanding environmental and safety ...
By Siemens Industry, Inc. - Process Analytics Office in Tres Cantos, SPAIN.
-
Premium
Gas detection in energy industry
Gas detection requirements for power generation can vary widely based on the fuel source, which includes coal, oil, natural gas and nuclear. Regardless of the type of power facility, gas, fire and other hazards pose significant risk to employee safety and also can disrupt the supply of energy to commercial and residential customers. At Teledyne Gas and Flame Detection, our wide range of gas detection products meets the needs of all forms of power generation. Our century of experience, combined with advanced system ...
By Teledyne Gas and Flame Detection Office in Renfrew, UNITED KINGDOM.
-
Premium
Machine condition monitoring for power generation
Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil ...
By AMETEK Spectro Scientific Distributor in Stockport, UNITED KINGDOM.
-
Valve Actuators for Power Industry
Beside the valve automation within the water and steam cycle our core competence is the temperature control of the heat transfer fluid. Actuators for applications in power plants such as high-pressure valves, spray water control, coal handling, turbine-bypass, feed water control or heat exchangers have always been and will constantly be the strength of ...
By Drehmo GmbH based in Wenden, GERMANY.
-
Gas safety and process control for gas/oil/coal-fired power generation and refineries
By AMETEK Process Instruments Distributor in Dronfield, UNITED KINGDOM.
-
Gas Detection Solutions for Power Generation Industry
Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you ...
By Boreal Laser Inc. Distributor in NETHERLANDS.
-
Solutions for water treatment in the energetic and chemical industry
Energy and Chemistry are interrelated with Water. To generate fuel and electricity, through extraction of coal, oil and gas, and through geothermal, hydroelectric, nuclear and to a lesser degree, solar and wind plants, the water consumption footprint is significant. Needless to mention that the extraction, processing and transformation of raw materials also require a major water ...
By Salher Distributor in Ypsonas, Limassol, CYPRUS.
-
Continuous Gravimetric Feeding for the Power Industry
Bulk material handling in coal-fired power plants and all associated sectors of industry is big business. The work is highly sought after, fiercely bargained for and stable – in terms of future-proofing. The market-leading solutions for weighing, feeding and automating in the field come from Schenck Process whose products are amongst the most reliable in the industry. The well-engineered IC Power product range includes everything from components to complete systems for bulk material handling at all process ...
By Seid based in Sandnes, NORWAY.
-
Primary air control for coal-fired power plants
Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty 'Fly Ash' laden ...
By Kurz Instruments, Inc. Distributor in SPAIN.
-
Industrial power solutions for the coal-fired sector
Without controls, the combustion of solid fuel (coal) to generate power results in the emission of carbon dioxide (CO2), sulfur dioxides (SO2), nitrogen oxides (NOx), particulate matter, mercury, lead, cadmium, carbon monoxide, volatile organic compounds (VOCs), and arsenic. This is why it is critically important for solid fuel power plants to comply with stringent environmental standards by utilizing the optimal technologies for emissions management, environmental air pollution control, and fluid handling and ...
By CECO Environmental Office in Nunspeet, NETHERLANDS.
-
e-commerce businesses solutions for renewable energy industry
ATSCO Global Renewable Energy Sector: Renewable Energy is the energy derived from the existing energy flow in the ongoing natural processes. Today eighty percent of global energy comes from fossil fuels. Renewable energy sources play the most important role in reducing dependence on fossil fuels such as coal, oil and natural gas. Renewable energy sources are Solar, Wind, Biomass, Geothermal, ...
By Atsco Global Trading based in Luton, UNITED KINGDOM.
-
Textile engineering solutions for coal-fired power stations sector
High quality filters are an absolute necessity when it comes to keeping the air clean in coal-fired power stations. Customised filter solutions are also required here as the lignite and hard coal can differ with regard to their composition, depending on where they are extracted ...
By Lydall Gutsche GmbH & Co. KG based in Fulda, GERMANY.
-
Thermal processes and sensor-based analysis solutions for cement production sector
Fuel-Mix in cement production: Reduce costs and increase quality – based on intelligent process control. As fossil fuels become increasingly scarce and energy costs continue to rise, alternative fuels such as heavy oil, solvents, solid recovered fuels, and meat and bone meal are becoming more and more common as a substitute for oil and coal dust. This applies in particular to cement production with its high energy consumption. With the help of inspect pro control C the combustion behavior of different fuel ...
By ci-Tec GmbH based in Karlsruhe, GERMANY.
-
Particulate measurement & control solutions for power industry
Without the Power Industry, all other Industrial sectors would not exist. As developing economies expand their power generation abilities to meet growing demand, developed economies are challenged with aging infrastructure, outdated technologies, and increased legislation regarding emission levels and monitoring techniques. Today, Auburn FilterSense is a leading supplier of continuous particulate monitoring systems and automated controls for boiler baghouses in coal and trash burning plants. B-PAC™ fabric ...
By Auburn FilterSense, LLC Office in UNITED KINGDOM.
-
Compressors for Steam Power Plants
In steam power plants, the thermal energy contained in water vapour is used to power a steam turbine which in turn drives the generator. In the process, conventional fuels such as oil, natural gas, hard coal or brown coal are used to fire the steam boiler. In coal-fired power plants, coal is the only fuel used, whereas waste incineration facilities can also use treated waste in order to generate electricity. ...
By J.P. Sauer & Sohn Maschinenbau GmbH based in Kiel, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you