Coal-fired Power Applications available in Connecticut
-
Premium
Gas monitoring during industrial process
EM-5 CEMS Coal power plant: Entrance of SCR denitration device, NOx O2 Exit of SCR denitration device: Measure remanet NH3 after reaction and avoid blocking by crystallization, NH3; Calculate denitrification rate with Nox input, NOx O2 Gas-fired power plant: Counting tail gas emission and realtime concentration, NOx O2 SO2 Temperature pressure flow dust ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Machine condition monitoring for power generation
Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Power generation solutions for pulp and paper production industry
The pulp and paper industry requires large amounts of power and heat in forms of hot air and steam. Solar’s best pulp and paper energy solutions use gas turbine-based cogeneration, better known as Combined Heat and Power (CHP). Cogeneration and CHP installations can reduce our customers’ carbon footprint and reduce energy consumption in pulp and paper production. Estimate your annual operatings savings for your plant using our value estimating ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Gas detection in energy industry
Gas detection requirements for power generation can vary widely based on the fuel source, which includes coal, oil, natural gas and nuclear. Regardless of the type of power facility, gas, fire and other hazards pose significant risk to employee safety and also can disrupt the supply of energy to commercial and residential customers. At Teledyne Gas and Flame Detection, our wide range of gas detection products meets the needs of all forms of power generation. Our century of experience, combined with advanced system ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Process instrumentation and analytics solutions for power industry
Siemens has a wide portfolio of products for process instrumentation, weighing and process analytics. Our solutions make it possible to economically address the growing energy demand as well as expanding environmental and safety ...
By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).
-
Premium
Syngas Analyzer Applys in Gasifier
Coal gasifier: The coal gasifier can be divided into four modes by the movement pattern of the coal in the gasifier: fixed bed (moving bed), fluidized bed, entrained bed and molten bed. While it can be summarized to atmospheric and high pressure styles according to the gasification operating pressure. Based on the feeding method, the coal gasifier contains solid and liquid feeding manners. In the light of the residue-discharge mode, it can be classified into solid and liquid patterns. In industry, the typical ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Reciprocating Engine Generators Application Note
Reciprocating Engine Generators are a trusted method of providing reliable electric power for small-to medium-scale operations.Driven by the benefits of lower costs and risks, gas-powered reciprocating engines are increasingly being used in place of combined-cycle gas turbine power plants.While the reciprocating engines deliver greater flexibility, especially with regards to the use of renewable fuels such as biogas, they still require precise gas monitoring to ensure emissions limits are met.AMETEK Land’s ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Processing of Alternative Fuels for the energy industry
RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration ...
By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.
-
Premium
Desulfurization on-line continuous monitoring solution
SO2 is one of several important pollutants in the atmosphere, SO2 from the atmosphere can stimulate people's respiratory tract, abate respiratory function, and lead to respiratory resistance decreased, induce various inflammation of respiratory tract, harm to human health. SO2 also is harm to many plants. SO2 and its generated sulfuric acid mist can corrode metal surfaces and cause damage to paper products, textiles, leather products. It may also form acid rain, which is serious harm to the ecological system and ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Carbon Monoxide and Carbon Dioxide Sensing for Gasification
Application: Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide and Hydrogen, which amount for around 85% of Syngas, and it is produced by a process called ...
By Edinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM.
-
Primary air control for coal-fired power plants
Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty 'Fly Ash' laden ...
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Continuous Gravimetric Feeding for the Power Industry
Bulk material handling in coal-fired power plants and all associated sectors of industry is big business. The work is highly sought after, fiercely bargained for and stable – in terms of future-proofing. The market-leading solutions for weighing, feeding and automating in the field come from Schenck Process whose products are amongst the most reliable in the industry. The well-engineered IC Power product range includes everything from components to complete systems for bulk material handling at all process ...
By Seid based in Sandnes, NORWAY.
-
Industrial power solutions for the coal-fired sector
Without controls, the combustion of solid fuel (coal) to generate power results in the emission of carbon dioxide (CO2), sulfur dioxides (SO2), nitrogen oxides (NOx), particulate matter, mercury, lead, cadmium, carbon monoxide, volatile organic compounds (VOCs), and arsenic. This is why it is critically important for solid fuel power plants to comply with stringent environmental standards by utilizing the optimal technologies for emissions management, environmental air pollution control, and fluid handling and ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Hydrogen gas solutions for grid balancing sector
Decarbonising the production of hydrogen, enabling a green transport fuel for trains. The ongoing trend to deploy more renewable power sources is a positive step towards reducing dependency on fossil fuels, but it causes some big issues for electricity grid operators. Balancing the grid is becoming more challenging, because renewables are increasing the temporal mismatch between supply and demand on all timescales. Conventional grid balancing techniques cause CO2 emissions (ramping up a gas or coal power plant), ...
By ITM Power based in Sheffield, UNITED KINGDOM.
-
Hydronix Sensors for Coal
The moisture content of coal may be measured. Pulverised Coal Injection is a common method of burning low grade or low carbon coal to create electricity. Small particle size low grade coal is measured as it is injected into the burners. The rate of injection is a direct function of the moisture content of the coal. As the material becomes drier the throughput is reduced to avoid serious overheating which can result in very significant financial loss and plant ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Gas analyzer solution for coal gas continuous monitoring system
Gas analyzer solution for coal gas continuous monitoring ...
By Hubei Cubic-Ruiyi Instrument Co., Ltd. based in Wuhan, CHINA.
-
Energy management
With energy costs skyrocketing, companies are looking for ways to optimize energy usage and cut costs, but maintain production output. Companies now capture details of energy use, such as peak and non-peak use and type of fuel used— natural gas, steam, coal, etc. There are different programs such as Energy Star that companies are using for guidance and ...
By Lisam Systems | Perillon based in Ecaussinnes, BELGIUM.
-
Evaporators for Power Industry
EVALED evaporators treat or minimize wastewater from the Power Generation Industry. Flue gas desulfurization effluents require different kinds of treatments depending on the type of fuel, water sources, and environmental regulations. Coal, Gas, Solar, Nuclear. Wastewater treatment for a more sustainable power ...
By EVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY.
-
Recycling Systems for the engineered fuel, biomass / RDF
Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero ...
By Macpresse Europa S.R.L based in Vernate, ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you