Diesel Combustion Equipment For Fossil Energy
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Equipment Technical Specifications: Model: MSW1000. Feed Capacity: 200-400 kgs per feed. Burning Rate: 100 kgs per hour. Burning Time per Feed: 2-4 hours. Voltage: 380V. Power: 0.7Kw. Fuel: Natural Gas or Diesel oil. Burner: Italy Burner. Feed Mode: Manual. Fuel consumption (Oil): 8.0-20.0 Kgs/Hour. Fuel consumption (Gas): 10.0-20.0m3/Hour. External Dimensions: 200 x 170 x 230cm (without stack). ...
-
Manufactured by Henan Machinery & Equipment Company Limitedbased in CHINA
The burner is also called a burner. It can be divided into an oil burner and a gas burner according to the fuel; it is divided into a kiln burner and a boiler burner according to the object of use; it can be divided into industrial burners, civil burners and specials according to the application fields. burner. The fuel burner is divided into light oil (such as diesel) and heavy oil burner (such ...
-
Manufactured by Hongjia Grain Machinery Co., Ltd.based in CHINA
This mini paddy dryer is mainly used to dry grain paddy in parboiled rice mill plant. Based on our rice engineering experience and traditional technology, we improved the transmission system and the material breaking device and finally improved the rice dryer efficiency and overall performance of the grain dryer. The whole rice grain dryer consists of a feeding device, drying warehouse, ...
-
Manufactured by Haitai Power Machinery Co., Ltd.based in CHINA
HAITAI Power has decades of production experience in Perkins generators sets, is the important OEM partner for Perkins. The Perkins series diesel gen-sets produced by our company have the characteristics of compact structure, light weight, strong power, benefit for energy saving and environmental protection, high reliability and easy maintenance etc., which can meet the needs of different ...
-
Manufactured by P.P.U.H. Horus-Energia Sp. z o.o.based in POLAND
A CHP generator set is constructed from a power generator set with an added heat recovery module. The scope of power of offered CHP generator sets: 8 kWe and 10 kWt to 2.2 MWe and 2.5 MWt. Complete systems may consist of up to 32 CHP generator sets operating for one power grid and one hot water ...
-
Manufactured by Sat Dimacobased in FRANCE
Crankshaft pump (radial), 3 ceramic pistons. Regulator : separated from the manifold with pressure drop to zero. Integrated detergent application system. Reduction gear : reduces the pump rotation speed. Diesel engine. Pull start. Welded steel frame and hood, epoxy ...
-
Manufactured by Jiangsu Jufeng Thermal Technology Co.,Ltdbased in CHINA
Heavy oil burner is specially designed for heavy oil with high viscosity and poor atomization performance, and it is a combustion device to improve the combustion performance of heavy oil. It is mainly composed of heavy oil tank, oil filter, supply pump, heat exchanger, heavy oil switching valve, fuel pump, and pressure regulating valve, burner and its conveying pipeline. ...
-
Distributed by Tuba Turbine GmbHbased in GERMANY
The diesel engine, also known as a compression-ignition engine is an internal combustion engine that uses the heat of compression to initiate ignition and burn the fuel that has been injected into the combustion chamber. Diesel and gasoline engines are both internal combustion engines that use pistons to create mechanical energy. However, diesel engine distinguishes from petrol and gas engine, ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Equipment Technical Specifications: Model: YD-30. Feed Capacity: 60-120 kgs per feed. Burning Rate: 30 kgs per hour. Burning Time per Feed: 2-4 hours. Voltage: 220V. Power: 0.59Kw. Fuel: Natural Gas or Diesel oil. Burner: Italy Burner. Feed Mode: Manual. Fuel consumption (Oil): 10.0-16.0 Kgs/Hour. Fuel consumption (Gas): 10.0-15.0m3/Hour. External Dimensions: 145 x 90 x 175cm (mainbody). Internal ...
-
Manufactured by Waterline Renewal Technologies.based in USA
Increase your crew’s productivity three-fold with LMK’s new PowerCure mini steam cure unit. PowerCure mini is portable and powerful. Don’t waste any more time waiting for liners to cure. With this small add on, the installer can cure liners in under an hour. PowerCure mini can be maneuvered into small areas where boiler trucks and other large equipment would be impractical. ...
-
Manufactured by Ferrolibased in LATVIA
Floor standing boiler with cast iron heat exchanger for forced draft burner (gas / ...
-
Manufactured by Energy Bruciatori lndustriali S.r.l.based in ITALY
The IBSM MG series industrial burner is a MONO-BLOCK type burner powered both with NATURAL GAS, METHANE or LPG (liquid propane gas) and with DIESEL 2°E at 20°C,thanks to dual fuel technology. This feature increases its already high flexibility, allowing you to choose the type of fuel and thus obtain a considerable economic ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
The incinerator for emergency situations, fixed on a metallic platform, is an equipment intended for situations in which the disposal of waste cannot be done in a short time by conventional methods and equipment. It is equipped for rapid field interventions and continuous use 24/24 hours. ...
-
Manufactured by Concord Road Equipment Mfg. Incbased in USA
Concord bottom fired bituminous road repair kettles offer a safe and effective way to heat, transport, and distribute liquid asphalt materials. As skid or trailer mounted units in seven different capacites ranging from 40 to 550 gallon capacity, these kettles are perfect for any size operation. The heavy duty all steel construction kettles are internally baffled to prevent excessive sloshing and ...
-
Manufactured by CPK Automotive GmbH & Co KGbased in GERMANY
In many applications with difficult operating conditions the exhaust gas temperatures are not sufficient to run exhaust aftertreatment systems like Diesel Particulate Filters (DPF) or Selective Catalytic Reduction (SCR) effectively. A simple burner is often capable to increase the exhaust temperature and make the aftertreatment systems work in the effective temperature range. DYNTEST RegFire has ...
-
Manufactured by Alfa-Therm Limitedbased in INDIA
Portable/Skid mounted Incinerator with dual chamber, dual burners. Double chamber unit. Completely self-contained unit. No pre-use construction at site. Ready to operate. Esthetically pleasing looks. Electrical requirement: 220 v AC. Height of stack - 3 mtrs. Burners- Diesel fired/Gas fired. Control Panel- Provided. Audio-visual alarms for abnormal working conditions ensures complete safety. Unit ...
-
Manufactured by Suncue Company Ltd.based in TAIWAN
Indirect hot air ensures the safety and sanity of food. Hot air volume and temperature can be adjusted. Durable for long-term professional use. The total surface area for drying of large models can be up to 39 ...
-
Manufactured by Haitai Power Machinery Co., Ltd.based in CHINA
Cummins is the largest foreign engine invested enterprise in China which has invested more than 140 million US dollars. It owns Chongqing Cummins Engine Co., Ltd. (which produces M, N, K series ) and Dongfeng Cummins Engine Co., Ltd. (which produces B, C, L series ), producing the engines with universal global quality standards, providing reliable and efficient guarantee due to its international ...
-
Manufactured by Yokogawa Electric Corporationbased in JAPAN
Smart control systems are key components for smart manufacturing plants. By quickly and easily responding to business and production dynamics, they enable users to meet changing market demands. With STARDOM control systems, processes are no longer interrupted thanks to redundant configurations and reliable hardware. End-to-end digital communication optimizes asset management by transmitting asset ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Model: YD-10. Feed Capacity: 20 kgs per feed. Burning Rate: 10 kgs per hour. Burning Time per Feed: 2 hours. Voltage: 220V. Power: 0.5Kw. Fuel: Diesel oil. Burner: China Burner. Feed Mode: Manual. Fuel consumption (Oil): 5.4-12.6 Kgs/Hour. External Dimensions: 100 x 100 x 160cm (mainbody). Internal Dimensions: 50 x 50 x 80cm(Primary Chamber). Waste combustion chamber: 200Liters. Post Combustion ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you