Fly Ash Articles

  • Bulk Cement Trucks

    Bulk Cement Truck, also known as powder material transporter, consists of a special automobile chassis, a bulk cement tank body, a gas pipeline system, and an automatic unloading device. It is suitable for bulk transportation of fly ash, cement, lime powder, ore powder, granular alkali and other dry materials with particle diameter, not more than 0.1mm. Mainly used in cement plants, cement ...

  • RTV High Voltage Insulator Coating

    Anti-pollution Flashover Coating (rtv insulator coating) High Voltage Insulator Coatings (HVIC)   To prevent the electrical equipment from pollution flashover in humid climate; Free of surface maintenance and cleaning after coated. Features of RTV High Voltage Insulator Coating: 1. ...

  • Multifunctional Insulator Cleaning Agent RS-10

    Multifunctional Insulator Cleaning Agent (RS-10) is mainly used for eradicating dirt, dust and contaminations on surface of the power equipment, especially clean that which surface was heavily polluted. After cleaning, RS-10 can significantly enhance the adhesion between the RTV coatings and the surface of insulator. The Advantages of Multifunctional Insulator Cleaning Agent RS-10:Remove ...

  • Enhanced Anti-pollution Flashover Coating RTV-II

    A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental conditions, also can be used in normal environmental conditions. RTV-II/ PRTV is a one part and new type Room Temperature Vulcanizing  ...

  • Anti-Algae & Anti-Fouling Coating

    Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in China and rest of the world. Applicable for flash-over & algae prevention, our well-formulated anti algae coating and anti fouling coating are acknowledged for offering lasting sterilization and inhibition for mold, bacteria, yeast and other ...

  • Misunderstanding about the operation of the factory boiler

    The boiler is a very common equipment in the factory. LNEYA Xiaobian tells everyone that many people have misunderstandings about it.Misunderstanding 1 The higher the steam pressure, the better.The choice of boiler steam pressure depends mainly on the needs of the user. The steam pressure is low, the safety of the pressure-bearing parts is favorable, the energy consumption is also low, and the ...

  • Simultaneous removal of aqueous Zn2+, Cu2+, Cd2+, and Pb2+ by zeolites synthesized from low-calcium and high-calcium fly ash

    In this study, zeolites were synthesized from low-calcium (LCZ) and high-calcium (HCZ) fly ash, respectively. Subsequently, the zeolites were tested for their removal effectiveness for four aqueous cations, namely, Zn2+, Cu2+, Cd2+, and Pb2+, as a function of contact time, pH value, adsorbent dosage, and initial concentration of heavy metals. Both zeolites were ...


    By IWA Publishing

  • Fly Ash & the Lightweight Aggregate Market

    In 2015, the global fly ash market was estimated to be valued at 40 billion USD. A recent industry analysis by Research Nester anticipates the market will reach an estimated 70 billion USD by the end of 2023 – a 7.1% CAGR owing to increasing ...


    By FEECO International, Inc.

  • Laboratory investigation of hydraulic characteristics of fly ash as a fill material from the aspects of pollutant transport

    Depending on the usage of fly ash, it is necessary to determine its environmental parameters, such as the potential for pollutant transport/leaching after its built-in. This study presents a methodology for determination of transport parameters (filtration coefficient, effective porosity, longitudinal dispersivity, and the mean residence time) from experimental data collected from column ...


    By IWA Publishing

  • Cenospheres - Case Study

    The problem: A cenosphere is a lightweight, inert, hollow sphere made largely of silica and alumina and filled with air or inert gas, typically produced as a byproduct of coal combustion at thermal power plants. On average 0.5% of the fly ash generated in a coal fired power station boiler are Cenospheres. When fly ash is wet discharged in to ash ponds/lagoons cenospheres float on ...


    By Dirk European Holdings LTD

  • Dunbar East Lothian, Scotland - Energy Recovery Facility, 320,000 Tonnes Per Annum - Case study

    The new energy recovery facility, developed by Viridor, will be located at the rail-linked waste treatment hub in Dunbar, East Lothain. Based on a detailed, competitive tender, B&W Vølund and Interserve won the EPC/turnkey contract for the facility. The plant ...


    By Dürr MEGTEC, LLC

  • Skærbækværket / Skaerbaek Power Plant 2 x 154 MW Biomass-Fired Boilers - Case study

    Fredericia, Denmark Babcocfc & Wilcox Velund (B&W Volund) designed, manufactured and commissioned two biomass boilers for the Skaerbaekvaerket power plant in Denmark. The project allows the combined heating and power plant to supply approximately 60.000 households with dean and reliable district heating and electicity while reducing CO/ emissions. Plant ...


    By Dürr MEGTEC, LLC

  • Margam, Port Talbot, South Wales Waste Wood-Fired Power Plant 40 MWe - Case study

    The developer Eco2 secured the site and planning consent to develop the biomass facility in Margam, Port Talbot. Following a competitive tender, Babcock & Wilcox Vølund and Interserve were awarded an EPC/turnkey contract for the facility. To further de-risk the project for the plant owner, Glenmont Partners, who secured financing for the scheme and purchased the project at financial ...


    By Dürr MEGTEC, LLC

  • Newbuild Power Station in Karlsruhe - Case Study

    EnBW is one of the biggest German energy suppliers. A major new build bituminous coal fired power plant construction project is the new boiler number 8 of the Rheinhafen Dampfkraftwerk (RDK) in Karlsruhe. The new boiler will have a capacity of 912 MWel with a heating capacity of 220 MWth. The unit will be erected beside the existing units RDK4s and RDK7 and have a net efficiency of > 46% ...

  • E.ON Benelux power station Maasvlakte, Rotterdam - Case Study

    Next Generation Power Production E.ON’s new Maasvlakte power station also known as MPP3 is built in the harbour of the Dutch metropolis Rotterdam. The modern supercritical hard coal fired unit with a capacity of 1100 MW is expected to have a thermal efficiency of more than 46 percent. The new plant built in the vicinity of the existing Maasvlakte station is designed as cogeneration ...

  • Vattenfall`s Cogeneration Power Plant Reuter West - Case Study

    The cogeneration power plant “Reuter West” was erected as a base load power plant in the vicinity of the existing “Reuter” plant. The two hard coal fired 300 MW units D and E were commissioned in 1987 and 1989. Today the cogeneration units supplying electricity and thermal energy are operated by Vattenfall Europe GmbH. The heart of each power plant is the boiler where the ...

  • Spatial differences in trace element bioaccumulation in turtles exposed to a partially remediated coal fly‐ash spill

    Large‐scale releases of environmental contaminants from industrial facilities can cause considerable damage to surrounding ecosystems and require remediation. The expense and/or undesirable environmental side effects of physical removal may constrain remediation efforts. In 2008, approximately 4.1 million cubic meters of fly‐ash were released into the Emory River at a coal burning power plant ...


    By John Wiley & Sons, Ltd.

  • The Beltran biomass cogeneration system

    An effective, economical solution for harvesting safe, renewable domestic energy, mitigating wastes and achieving environmental goals. Background The Beltran Biomass Cogeneration System (BBCS) is an integrated, three-stage process that uses proprietary gasification technology to convert biomass and other organic wastes into versatile, cleanburning synthesis gas. The purified ...


    By Beltran Technologies, Inc.

  • U.S. Operating Services, Scrubgrass Generating Station - coal fired power plant-case study

    Customer: U.S. Operating Services, Scrubgrass Generating Station. Contact: Philip Jones, Plant Engineer. Type of Facility: Coal fired power plant The Scrubgrass Generating Station owns and operates a Crisafulli FLUMP system. The FLUMP was manufactured with an abrasion resistant hardened carbon steel Crisafulli J-series slurry ...


    By SRS Crisafulli, Inc.

  • Cement mixes - case study

    For the manufacture of various cements including Portland cement Portland blast furnace cement Portland pozzolanic cement Portland fly ash cement Portland oil shale cement Portland limestone cement Portland fly ash cement with slag Slag cement from divers raw materials, various techniques are used from the field ...


    By AVA GmbH u. Co. KG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you