Fuel Testing (Fuel Analysis) Equipment
-
Manufactured by Fuel Doctorbased in UNITED KINGDOM
Microscopic water contamination detection & haze rating fuel quality test kit. Suitable for all types of diesel fuel testing applications: marine – power generation – construction equipment, automotive – storage tanks – transport equipment + more. Easy to use – Test results in 5 ...
-
Manufactured by Dieselcraftbased in USA
Test detects water and solid contaminants in diesel fuels. Very simple and immediate; If all 5 indicator marks are visible the test PASSES but if the indicator lines disappear then the fuel FAILS. Failed tests require Fuel ...
-
Manufactured by Dieselcraftbased in USA
W-5 Test Kit: Test For Water in the Diesel Fuel Will work for clear and with red dyed ...
-
ShowcaseManufactured by Zeltex LLCbased in USA
Decades of expertise in portable octane, cetane and bio-fuel with lab-accurate analysis. 45 State Agencies have used Zeltex portable fuel octane analyzers over the years, making the ZX-101 series the gold standard in portable fuel testing. The main way that fuel is analyzed is through a CFR engine, which takes ...
-
based in NETHERLANDS
The model F-5 CFR engine is a complete system for diesel fuel cetane number determination, conforming to ASTM D613 Standard Test Method for Cetane Number of Diesel Fuel Oil. This method is accepted worldwide as the standard for determining the ignition quality of diesel ...
-
based in NETHERLANDS
The model FIT (Fuel Ignition Tester) is a desktop analyzer designed to rate derived cetane number. The FIT conforms to ASTM D7170 and IP method #PM-DI-05 to provide automated analysis of diesel fuel DCN. The analyzer is easy to use, compact and robust with a simple computerized operator interface. Maintenance of the FIT is ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
(Surface Acoustic Wave) sensor which reacts specifically to the presence of fuel vapor with a detection range of 0 – 15%. It can detect diesel, gasoline or jet fuel in engine oil. It conforms to ASTM D8004 - "Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave ...
-
Manufactured by Cast Aluminum Solutions, LLCbased in USA
APPLICATIONS: Rocket & Jet Fuel Test Stands. Mud Testing Applications (oil exploration). LNG Pre-Heat & Moisture Removal. Powder Coating Pre-Wash Systems. Packaging Sterilization. Phase Change for Cryogenic ...
-
Manufactured by SHATOX Co. LLCbased in RUSSIA
Portable laboratory for sample taking and on-line acceptance analysis of fuel with standard and express methods. The analysis results allow to estimate with great accuracy the fuel quality in conditions when analysis in stationary labs is not possible. The laboratory set allows to measure up 19 basic parameters of fuel quality. The ...
-
Manufactured by Kalvis, UABbased in LITHUANIA
M1 series boilers are used for heating of large sized residential and industrial premises and supplying heat for technological needs. Fuel used: saw dust wood chips, pellets of various types, compressed peat, grain waste, grain or other fuels. We can test your fuel in our ...
-
Manufactured by Continental Refining Company (CRC), LLCbased in USA
If used for tax exempt purposes, fuel required to have enough Solvent Red 164 dye to be visually apparent. Must meet the standard of 3.9 lbs. Solvent Red 26 per thousand barrels product. Dyed Biodiesel contains Solvent Red (ASTM D6258H) minimum 0.1 mg/L and maximum 20 ...
-
Manufactured by Continental Refining Company (CRC), LLCbased in USA
If used for tax exempt purposes, fuel required to have enough Solvent Red 164 dye to be visually apparent. Must meet the standard of 3.9 lbs. Solvent Red 26 per thousand barrels product. Dyed Biodiesel contains Solvent Red (ASTM D6258H) minimum 0.1 mg/L and maximum 20 ...
-
Manufactured by Real-Time Analyzers Inc.based in USA
The Portable Fuel Property Analyzer (PFPA) provides rapid fuel quality assessment using Near-Infrared Analysis combined with advanced Chemometric methods. Key fuel properties that dictate engine performance are determined in less than 10 seconds with only 2 mL of fuel ...
-
based in USA
Find and fix bad gas using the Mechanic In A Bottle Gasoline Test Kit. This diagnostic tool allows you to test ethanol-blended fuel in all equipment with 2-cycle and 4-cycle engines in order to determine if your fuel is fresh, marginal, or bad. This kit allows you to quickly and easily identify the sources of potential equipment ...
-
Manufactured by Fuel Doctorbased in UNITED KINGDOM
100 x individual test kits for detection of water in diesel fuel in standard kit. You can order as little as 10 test kits up to 100 test kits in the one storage box, just ask for a quote. Test kits shipped in vial storage box with hinged lid. Style / color of storage box may change a little from product images. 5 ...
-
Manufactured by Fuel Doctorbased in UNITED KINGDOM
100 x individual test kits for detection of water in diesel fuel in standard kit. You can order as little as 10 test kits up to 100 test kits in the one storage box, just ask for a quote. Test kits shipped in vial storage box with hinged lid. Style / color of storage box may change a little from product images. 5 ...
-
Manufactured by Continental Refining Company (CRC), LLCbased in USA
If used for tax exempt purposes, fuel required to have enough Solvent Red 164 dye to be visually apparent. Must meet the standard of 3.9 lbs. Solvent Red 26 per thousand barrels product. Dyed Biodiesel contains Solvent Red (ASTM D6258H) minimum 0.1 mg/L and maximum 20 ...
-
Manufactured by Shanghai Sinpar Scientific Instrumentbased in CHINA
Combination (Research and Motor Method) Octane Rating Unit FTC-M2 is used as a complete system for determining octane number of motor fuels, conforming to ASTM D2699(RON) and ASTM D2700(MON) Standard Test Methods. Combination Octane Rating Unit FTC-M2 provides quick switching between RON and MON test methods. With either method, ...
-
Manufactured by Shanghai Sinpar Scientific Instrumentbased in CHINA
Combination Octane Rating Unit FTC-M2 is used as a complete system for determining octane number of motor fuels, conforming to ASTM D2699 (RON) and ASTM D2700 (MON) Standard Test Methods. The Combination Octane Rating Unit FTC-M2 provides the convenient conversion between Research Method (RON) and Motor Method (MON). With either method, ...
-
Manufactured by Stanhope - Setabased in UNITED KINGDOM
AFIDA is a revolutionary development providing you with a fully automated way of determining Indicated Cetane Number (ICN) of diesel and diesel related fuels. The AFIDA can analyse multiple samples in sequence and selects the samples using the 36-place autosampler. Only a small sample volume of 40 ml is required per test with a short analysis ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you