Fuel Flow Monitoring Equipment For Fossil Energy Available In Australasia
-
Manufactured by Bell Flow Systems Ltd.based in UNITED KINGDOM
MG80 Fuel / Diesel Flow Meter . 10~90 L/min, Accuracy: +/- 1% . 1' BSP connections . 3 digit resetabble / 6 digit non resetabble total . Flexible Installation options due to port arrangement . Polyamide Resin construction (fireproof) . Max 3.5 Bar working pressure, 60ºC Max Temp { Not suitable for Petrol ...
-
Manufactured by Mechatronicsbased in BELARUS
Special service kit Eurosens Destination for professional customization of Mechatronics equipment. Most of our Eurosens sensors contain inside a powerful modern 32-bit microprocessor that continuously calculates various parameters (current fuel level, fuel consumption, fuel volume).To obtain the correct data from Eurosens fuel level sensors and fuel flow sensors, they must be configured by an ...
-
Manufactured by Phillips & Temro Industriesbased in USA
Eliminate down time due to cold hydraulic fluid. Arctic Fox has a variety of products to keep hydraulic fluid flowing and reduce pump cavitation and blown ...
-
Manufactured by Emiliana Serbatoi S.r.l.based in ITALY
Polyethylene tank for Diesel fuel and gasoline transport, in exemption from ADR according to paragraph 1.1.3.1.C. Carrytank® 330 is a tank made in linear polyethylene designed for Diesel fuel transport; it is equipped with the following fittings: reinforced lockable lid, filling aluminium plug with integrated air vent device, level indicator, inline filter, fuel transfer unit, automatic fuel ...
-
by GuardMagicbased in LATVIA
GuardMagic FSM2/1 is a compact universal GSM/GPRS module for wireless monitoring the status of stationary remote objects: fuel storage tanks, fueling station, diesel generators, pumps refrigerators, etc. ...
-
Manufactured by KRAL GmbHbased in AUSTRIA
KRAL fuel consumption measurement takes into account the effects of the engines, and ...
-
Manufactured by Forney Corporationbased in USA
adVantage Duct Burners perform in the most challenging conditions. Premium components and patented technology join to perform like no other duct ...
-
Manufactured by Phillips & Temro Industriesbased in USA
TheHotLine electric In-Line Fuel Warmer can liquefy gelled or frozen diesel fuel in just 3 to four minutes, using only 2% of available battery capacity BEFORE you start the engine. If a power loss is noticed due to filter plugging while in operation, all it takes is a simple flip of a switch on the dashboard, and within 60 seconds the HotLine will begin eliminating the fuel waxing that is causing ...
-
Manufactured by Emiliana Serbatoi S.r.l.based in ITALY
Polyethylene tank for Diesel fuel transport in exemption from ADR - paragraph 1.1.3.1.C. Compact and light, manufactured in roto-molded linear polyethylene, Carrytank 440 is equipped with the following fittings: filling plug, air vent device, fuel transfer unit, integrated forklift pockets (full tank), handles for lifting and carrying (empty tank) and integrated recesses for securing with ...
-
Manufactured by ChengLi Special Automoble Co., Ltd.,based in CHINA
4×2 ISUZU GIGA 4000 gallon petrol oil tanker truck (also called fuel oil bowser, diesel gasoline tanker bowser, fuel oil dispenser truck, petrol tanker truck, refuel bowser vehicle) is used to transport oil, diesel, gasoline, kerosene, etc. ChengLi company Production fuel bowser can be divided into many compartments to transport different types of fuels, lubricant, crude oil, alcohol. ISUZU ...
-
Manufactured by Kawasaki Gas Turbinesbased in USA
Ideal for reliable on-site base load power generation requiring from 2000 kW to 3000 kW for co-generation applications. The GPB30 / 30D is based on Kawasaki's proven heavy duty single combustor engine platform with over 20 years of commercial experience and proven reliability. It is designed for installation in areas requiring reduced engine emissions. At 2930 kW (ISO), it is ideal for ...
-
Manufactured by Assured Automationbased in USA
This low-cost electronic fuel flow meter easily installs either in-line or at the nozzle. The large easy to read display and compact lightweight design makes it easy to handle. A rugged aluminum housing and sealed electronic circuitry provides years of durable use in almost any condition. Two AAA batteries power the small microprocessor for a year and are very easy to replace. ...
-
Manufactured by Mechatronicsbased in BELARUS
Eurosens Direct fuel consumption sensors are designed to measure fuel consumption of diesel engines or other consumers in the range from 1 to 3000 liters per hour. Direct flowmeters have a wide range of modifications, (100, 250, 500, 1500, 3000 liters per hour), can have built-in display and different output interfaces. There are versions with threaded and flange ...
-
Manufactured by Kawasaki Gas Turbinesbased in USA
Ideal for reliable on-site base load power generation requiring from 1200 kW to 1700 kW for co-generation applications. The GPB17/17D is based on Kawasaki's proven M1A heavy duty single combustor gas turbine with over 20 years of commercial experience and proven reliability. At 1690 kW (ISO), it is ideal for cogeneration applications in offshore oil platforms, data centers, industrial process ...
-
Manufactured by OVAL Corporationbased in JAPAN
A small-size high performance positive displacement flowmeter for managing the remainder of fuel oil tank, replenish period, and precisely measuring the consumption of fuel oil that is essential for billing the ...
-
Manufactured by Kawasaki Gas Turbinesbased in USA
Ideal for reliable on-site base load power generation requiring from 1200 kW to 1700 kW for co-generation applications.The GPB17/17D is based on Kawasaki's proven M1A heavy duty single combustor gas turbine with over 20 years of commercial experience and proven reliability. At 1690 kW (ISO), it is ideal for cogeneration applications in offshore oil platforms, data centers, industrial process ...
-
Manufactured by Altronic, LLC - GTI Bi-Fuelbased in USA
The Control Panels are based on proven Altronic controllers and provide state-of-the-art engine control and safety shutdown monitoring. The system is designed specifically for GTI Bi-Fuel applications and is straight-forward and easy to operate. The panel monitors a number of pressure and temperature points and returns the engine to 100% diesel operation should any parameter deviate from its ...
-
Manufactured by Gill Sensors & Controls Limitedbased in UNITED KINGDOM
The Gill Ultrasonic Fuel Flow Meter is compact, lightweight and designed to withstand extreme levels of vibration and temperature. The Fuel Flow Meter uses proven solid-state ultrasonic flow measurement technology to detect bi-directional fuel flow rates up to 8000ml/min. The fuel flow meter is capable of monitoring both transient and steady fuel flow, flow direction, fuel temperature and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you