Gas Combustion Equipment For Fossil Energy In Australasia
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Since the implementation of the Kyoto treaty the industry has seen a widespread development and tightening of regulations governing greenhouse emissions for the reduction of CO emissions. The issuing of the so called CO certificate not only calls for the Methane gas to be to be burnt in gas flares according to the UNFCC regulations, but also requires the logging and forwarding of the gas quantity ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Mini-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) is Zeeco’s GLSF Min-Emissions down-fired burner firing with Refining Fuel Gas in the outer tips and PSA gas in the center tip. This design provides a flame shape that is normally the same width as the outside diameter of the burner tile allowing the burners to be installed in close ...
-
Manufactured by Entech - Renewable Energy Solutions Pty Ltd.based in AUSTRALIA
WtGas is the core technology of the Entech-Tru-RES™. It’s based upon a low temperature gasification process that converts waste from its solid to gaseous form of syn-gas (a methane like gas), so that it can be fired to generate energy; with emissions that are cleaner than firing of any fossil fuel (including natural gas!). The WtGas renewable energy system adopts ENTECH™ ...
-
Manufactured by Gasco Pty Ltd.based in AUSTRALIA
Gasco designs and manufactures a range of Hot Oil Heaters: 100KW to 7,500KW gas-fired, 25KW to 1500KW ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Eneraque Pty Ltdbased in AUSTRALIA
When waste is stored in landfill sites, micro-organisms break down the waste material causing gas to be released. This gas can be extracted from disposal site and made available for use as fuel. Eneraque manufactures, installs and maintains landfill gas flares purpose built for your waste ...
-
based in NORWAY
Aker Clean Carbon is leading SOLVit – a major scientific research and development programme to produce improved, cost-effective amines for the CO2 capture process. This eight-year NOK 317 million programme was launched in 2008 together with Sintef, an independent research organisation, and the Norwegian University of Science and Technology ...
-
Manufactured by VDM Metals International GmbHbased in GERMANY
Modern day key industry components are often exposed to high and highest temperatures and require the use of innovative high-temperature alloys. These usually heat-resistant or high-temperature materials have found a wide range of applications not only in furnaces and heat treatment plants, but they are also used as a substrate material for heavily stressed metallic catalysts. Other typical ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat & power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are typically ensilaged and stored in clamps or ...
-
Manufactured by Advanced Combustion Engineeringbased in AUSTRALIA
Advanced Combustion Engineering 'Controlled Air Incinerators' are primarily designed for batch operation with a burning cycle of approximately two hours and a cooling cycle also of approx, two hours, depending upon the density and calorific value of the waste. Unlike conventional multiple chamber incinerators which have large quantities of excess air, a controlled air incinerator uses less than ...
-
based in AUSTRALIA
For the large commercial and industrial applications, there is no equal to the Avus series. Avus ranges in size from 527kW to 4,000kW, and larger sizes are available on request. Avus outperforms all other CHP systems and is the ultimate choice for dependable onsite power and thermal generation. ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for vehicles with the cake produced, used ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you