Gas Combustion Equipment For Fossil Energy In Latin America
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be placed at lower, less visible elevations, allowing for ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers for tankers and ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 250 Energex Pilot is a high alloy, stainless steel pilot which combines a high voltage electronic excitor and a high energy spark rod to provide rapid, reliable ignition. More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other standard pilots, however instead of a flame front ...
-
Manufactured by SAACKE GmbHbased in GERMANY
If space is limited, the hot gas generators of the CCS-HTcompact series are often the first choice. The CCS-HTcompact consists of a double steel shell, lined with refractory bricks inside. Optimised for natural gas combustion systems, a SAACKE SSB-G is used as the burner, which generates a moderate combustion chamber temperature thanks to a high excess of air, guarantees perfect burnout and thus ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive acid by-products. Systems of this nature typically include ...
-
Manufactured by SAACKE GmbHbased in GERMANY
Use instead of waste. The ROTONOX GL uses rotary atomiser technology to burn a wide range of gaseous and highly viscous liquids more economically and with lower emissions than any other burner. Even contaminated oils and biogenic fuels are no problem for the ROTONOX GL and underline the strength of the robust design. The rotary atomiser technology offers maximum reliability with optimum burnout, ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for vehicles with the cake produced, used ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 244W Series is a highly reliable flare and ignition system. It utilizes a patented pilot ignition system that mixes pilot gas and air at ground level to provide a robust, high temperature pilot. The pilot is ignited away from the flare stack. This reduces wear and tear and allows routine maintenance to be carried out without exposing the operator to high temperatures. The design of the ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, improves combustion efficiency and smokeless performance. These flares generally dispose of heavier waste gases which have a greater ...
-
Manufactured by Muntersbased in USA
The VariMax™ OTH (Once-Through Heater) is a high efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion. The OTH is well-suited for recirculating ovens, dryers, makeup-air applications in cold environments, and industrial processes with moderate temperature rises. The counterflow configuration, ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 239A Series Waste Gas Burner is designed for burning biogas generated in the anaerobic digestion process. Burning or flaring to the atmosphere reduces the potential odor nuisance from venting directly to the atmosphere. This burner is suitable for burning low volumes of biogas, which is typically very 'wet', with a low BTU value (between 550 and 600 BTU), and composed primarily of ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Infilco Degremont has supplied more fluid bed incineration systems in North America than any other vendor. Our specialized incineration experts were recently awarded a U.S. patent for inventing a method to remove mercury and nitrogen oxides from combustion flue ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The FFG is easily adaptable to any pilot system which ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you