Gas Combustion Equipment For Fossil Energy In Texas
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
Manufactured by CECO Environmentalbased in USA
Stack Isolation Dampers are designed to provide accurate air flow and isolation at high temperature levels, and reduce the stack effect of a system when offline, protecting ductwork from the elements. Our Peerless-Aarding brand Gas Plant Stack Isolation Dampers are engineered for optimal performance and efficiency, and are commonly used in heat recovery steam generator (HRSG) exhaust stack ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301T Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper ...
-
based in USA
With the evolving shale gas market, the demand to build gas processing plants faster, without affecting quality and high performance, continues to develop. Many engineering companies have developed standard designs for core cryogenic equipment. Linde is the only company that has developed completely pre-engineered, modularized standard natural gas liquids (NGL) recovery plants covering the wide ...
-
Manufactured by WK ASIA-PACIFIC ENVIRONMENTAL PTE.LTD.based in GERMANY
Ovens, dryer and cooling zones are essential in every coating process. For environmental protection and to comply with the legal emissions limiting values we consequently minimize the use of primal energy. That’s why our efficient and durable TNV or RTO systems are the perfect addition for our ovens. Of course all relevant system components can be produced by WK‘s own production in ...
-
Manufactured by Encore Combustionbased in USA
Provides ground based, completely hidden combustion process. Provides smokeless combustion of heavy waste gas vapors. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion ...
-
Manufactured by Forney Corporationbased in USA
Forney Parallel Air Flow (PAF) burners are custom engineered for a wide range of heat inputs while providing the flexibility of firing a variety of fuel ...
-
Manufactured by MRW Technologies, Inc.based in USA
Whether your application has low pressure or high pressure, combustible or non-combustible gas, small or large flow, MRW can offer a solution. Our systems have proven successful worldwide in industries ranging from: Gas Processing, Oil & Gas Production, Midstream, Chemical & Petrochemical, Landfill, Petroleum Refining, Biogas/Biofuels, Steel & ...
-
Manufactured by EML Manufacturing, LLCbased in USA
Electric Immersion Heaters are typically electric heating elements that are immersed in a tank of liquid. Immersion heaters are found in glycol reboiler, caustic bath, water heaters (calorifier), and even the oil fryer in your favorite fast food restaurant. The electric heater would heat up the liquid though natural convection and conduction. Since the heat transfer is limited, it is imperative ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Min-Emissions Enhanced Jet burner is an Ultra-Low emissions flat flame burner.The picture (right) is of Zeeco’s GLSF flat flame burners in operation in an ethylene cracking furnace. The design allows for flat flame burners to achieve a great heat flux profile without flame rollover. A major advantage is that the heat flux profile can be changed as required for the specific ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Mini-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) is Zeeco’s GLSF Min-Emissions down-fired burner firing with Refining Fuel Gas in the outer tips and PSA gas in the center tip. This design provides a flame shape that is normally the same width as the outside diameter of the burner tile allowing the burners to be installed in close ...
-
Manufactured by Kris-Tech Wirebased in USA
Our standard unshielded VNTC power tray cable is stranded copper conductors (ASTM B-8), polyvinyl chloride (PVC) insulated, jacketed in nylon for moisture and heat resistance. Phase identified and cabled together with fillers and/or binders as required. Cabled core is covered with an overall black PVC jacket that is gas and oil resistant. Jacket available in colors. Suitable for use in hazardous ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
Manufactured by Encore Combustionbased in USA
Suitable for use in all bio-gas applications – landfill, wastewater treatment, food processing, breweries, etc.. Provides ground based, completely hidden combustion process. Provides smokeless combustion. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion efficiency. Temperature controlled to ensure the highest ...
-
Manufactured by CECO Environmentalbased in USA
Guillotine Dampers are used when tight shut-off is required to isolate specific portions of an exhaust gas system for maintenance or by-pass purposes. Our Peerless-Aarding brand Gas Plant Guillotine Damper is a heavy-duty design commonly used in heat recovery steam generator (HRSG) systems. Our custom designs have proven reliable in some of the most demanding environments, and include open-bonnet ...
-
Manufactured by CECO Environmentalbased in USA
Through years of experience and knowledge, we have patented innovative technologies designed to reduce nitrogen oxide (NOx) emissions for new or existing coal, oil, and gas fired boilers. Our CCA brand Low-NOx Burners (LNB) are configured to stabilize the combustion process and allow the unit to be operated at lower excess O2 by utilizing a flame stabilizer. To enhance the NOx reduction ...
-
based in USA
ME2C provides customer-focused mercury capture solutions driven by its patented SEA™ technology using a powerful combination of science and engineering. We design systems and materials tailored and formulated specifically to customers’ coal-fired units. Our cost-effective strategy for mercury emission reduction will meet or exceed U.S. Environmental Protection Agency (EPA) Mercury and ...
-
Manufactured by Gaumer Processbased in USA
Gaumer Process provides standard fuel gas conditioning systems (in accordance with Gaumer standard specifications) and custom engineered (in accordance with customer specifications) to meet the desired requirements of gas turbines, engines, burners and compressors of different makes. The deregulation of gas market, varying quality of natural/fuel gas from various resources with a broad range of ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Simply put – a pilot is continuous, it’s always on. The pilot flame serves to light the waste gas stream exiting the flare, or inside an incinerator, or any other combustion unit. You need to have an available fuel gas supply in order to install a continuous pilot. An ignitor (or ignition system) is an intermittent spark or flame front that is responsible for keeping the pilot lit. On ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you