Gas Desulfurization Equipment For Fossil Energy In Europe
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...
-
Manufactured by DMT Environmental Technology BVbased in NETHERLANDS
Standard system for removal of H₂S out of biogas. DMT has developed the DMT Sulfurex gas desulphurisation scrubber. The DMT-Sulfurex desulphurisation process has proven to be cost effective for smaller applications (see references) due to its low capital and running costs, whereas traditional gas desulphurisation systems are not designed for smaller applications and can only be cost ...
-
Manufactured by ARCHEA New Energy GmbHbased in GERMANY
The cultivated renewable raw materials are ensiled in a substrate storage and there stored until they are used in the plant. The most commonly used are corn silage, grass silage, manure, slurry and other renewable resources. All organic substances are introduced through the substrate entry. This mixing tank is connected with screw conveyors to the fermenter. These screws then dose very precisely ...
-
Manufactured by Burmeister & Wain Scandinavian Contractor A/S (BWSC)based in DENMARK
BWSC's business philosophy is to implement the cleanest and most efficient technology in our power plants. This entails minimum CO2, Nitrogen Oxides (Nox), Sulphur dioxide (SO2), Particulate matter (soot and fuel ash) as well as minimum energy resource consumption. We also offer CO2 neutral solutions utilising renewable ...
-
Manufactured by BTS Biogasbased in ITALY
The small plant FARMER is especially designed for the use of manure from agriculture. The plant size is matched to the average quantities produced. For this purpose, the technology in the large plants is as much as possible simplified and transferred to small variants. Therefore, in the 100 – 300 kW range, the FARMER represents an opportunity allowing smaller and average-sized farms to ...
-
Manufactured by Geohellas S.A.based in GREECE
Geohellas offers custom solutions to those industries whose processes include steps of purification of gas effluents prior to the release to the Environment. Applications include: desulfurization of gases, fly ash purification, decomposition of NOx gases, industrial food air filters and many ...
-
Manufactured by Allison Engineeringbased in UNITED KINGDOM
Vacuum Pressure Swing Adsorption (VPSA) system engineered for capture and purification of CO2 from biogas upgrading waste gas, flue gas streams as well as CO2 –rich industrial ...
-
Manufactured by Idro Groupbased in ITALY
The Agripower plant is based on the process of anaerobic digestion of input, where organic substances are degraded by micro/organism in the absence of oxygen (anaerobic condition) at a temperature of approximately 35°C-37°C (mesophil process) or at 50-55°C (thermophilic process). The input biomass (derived from farming and agriculture) is pumped into a pre-treatment area. The mixture ...
-
Manufactured by Beston Group Co., Ltd.based in CHINA
One of the desirable products of GreenBeston is the coconut shell charcoal making machine which can process as many as 3 tons of coconuts shell per hour. This machine is very popular in the market owing to its high-cost performance and vast development expectation. It has been well-sold in many coastal places in Southeastern Asia, Africa, and ...
-
by Total S.Abased in FRANCE
Refining involves distilling crude oil to obtain various fractions that are then processed into intermediate and commercial products. In petrochemical manufacturing, products from refining are converted to produce monomers and polymers, molecules which are found in many everyday ...
-
Manufactured by Nel ASAbased in NORWAY
The world’s most energy efficient electrolysers, the A Series features a cell stack power consumption as low as 3.8 kWh/Nm3 of hydrogen gas produced, up to 2.2 MW per stack. A Series electrolysers can produce up to 3,880 Nm3/h of hydrogen or just over 8 ton per day. Our modular concept enables us to deliver customized indoor hydrogen solutions for any application, configuration and size ...
-
Manufactured by Huesker Synthetic GmbHbased in GERMANY
The Covertec double membrane roof is an innovative, premium-quality roof system for the biogas industry. The system comprises two separate membranes manufactured from polyester woven fabric, PVC-coated on both sides, with a minimum weight of 27 oz/yd² (900 g/m²) and a minimum tear resistance of 900 lbs per 2 in. (4,000 N per 5 cm). The double-layer assembly is designed to even out ...
-
Manufactured by TS energy Group Srl/GmbHbased in ITALY
The small plant FARMER is especially designed for the use of manure from agriculture. The plant size is matched to the average quantities produced.For this purpose, the technology in the large plants is as much as possible simplified and transferred to small variants. Therefore, in the 100 – 300 kW range, the FARMER represents an opportunity allowing smaller and average-sized farms to ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
The Model 20 HT/GT agitators feature a high-efficiency gearbox designed specifically for agitator service. Models are available in right angle and parallel shaft configurations. These agitators feature a modular design package with a wide range of speeds for improved process control and greater application versatility. The Model 20 HT/GT agitators are designed to meet AGMA, OSHA, ANSI, IEC, DIN, ...
-
Manufactured by ECOTEC, Ecología Técnica, S.A.based in SPAIN
A Bioscrubber comprises a biological system in two stages that facilitates the immediate absorption of contaminants in an alkaline medium, obtaining transfer efficiencies greater than 99% and thus achieving emissions of undiluted biogas free of H2S. The Empty Bed Residence Time (EBRT) inside the scrubber is minimal, which leads to lower investment costs. Consequently, the H2S(l) is conducted to a ...
-
Manufactured by TS energy Group Srl/GmbHbased in ITALY
Our technicians and experts have developed the most advanced system of biogas power plants, integrating different technology that allow you to achieve the absolute maximum efficiency. In the past, attention was focused mainly on electricity production. Instead, BTS Biogas has always considered it fundamental to optimise the entire enhancement process of delivered products and by-products: ...
-
based in NETHERLANDS
One of the most efficient systems for the biological removal of sulphides from biogas is the BIDOX (BIological Desulphurization by OXidation). No chemicals are needed to operate the BIDOX system. The installation requires limited maintenance, is equipped with little process control and manages to reduce the amount of H2S in biogas to levels below 50 ppm. These features have a significant positive ...
-
Manufactured by Conveco Srlbased in ITALY
The plant is composed of several sub-sections each one accomplishing a specific treatment stage. The scrubbing tower features a proprietory injection set design providing effective counterflow biogas washing which, together with the long contact time between the washing solution and biogas mixture, dramatically reduces the H2S content from the very beginning of the ...
-
Manufactured by FBM Hudson Italianabased in ITALY
FBM-Hudson Italiana has developed design and manufacturing know-how to prevent hydrogen and high temperature embrittlement and cracking of the base material and the disbonding of the stainless steel weld overlays which may occur in Shell &Tubes Exchangers built for Hydrocraking, Hydrosulphurisation, Residue Desulphurisation, and similar ...
-
Manufactured by Ingersoll-Rand Air Solutions Hibonbased in FRANCE
Dry Screw Compressor package for gas compression application in where it is essential to avoid oil contamination of the gas or the system in which it is being used, Ingersoll Rand have a range of rotary screw compressors designed to produce “Oil free“ air. This product is particularly used in pneumatic conveying systems where product contamination can be expensive. These ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you