Gas Desulfurization Equipment For Fossil Energy In USA
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...
-
Manufactured by Clean Gas Systems, Inc. (CGS)based in USA
Our CGS TURBUBED ABSORBER utilizes a turbulent bed of marbles to achieve simultaneous dust and gaseous pollutant removal and achieve the highest efficiency. The number of beds is selected based on your efficiency requirements; Each bed is furnished with drain spouts utilizing rubber check valves for draining the scrub liquor back into the bottom of the unit. Unlike any conventional packed bed ...
-
Manufactured by Tricor Metals Incbased in USA
Special Applications/Features; Mechanical (roller) expanded tube-to-tubesheet joints. Hydro-expanded tube-to-tubesheet joints. Seal-welded tube-to-tube sheet joints. Strength-welded tube-to-tube sheet joints. Thermal oxide coating designs for added erosion & corrosion resistance. Extended surface tubing available. Flush mount tube to tube sheet for full drain-ability. Polishing requirements ...
-
Manufactured by KC Cottrell, Incbased in USA
KC Cottrell Inc. can offer wide range of Flue Gas Desulphurization technologies from wet FGD to semi-dry and dry scrubber technologies which can cover large scale utility boilers to medium and smallsize industrial boilers, sintering plants, glass furnaces, biomass boilers and incinerators etc. One of the cutting edge technologies KC Cottrell Inc. proudly offers is the unique KC Cottrell Gas ...
-
Manufactured by Nel ASAbased in NORWAY
The world’s most energy efficient electrolysers, the A Series features a cell stack power consumption as low as 3.8 kWh/Nm3 of hydrogen gas produced, up to 2.2 MW per stack. A Series electrolysers can produce up to 3,880 Nm3/h of hydrogen or just over 8 ton per day. Our modular concept enables us to deliver customized indoor hydrogen solutions for any application, configuration and size ...
-
Manufactured by Huesker Synthetic GmbHbased in GERMANY
The Covertec double membrane roof is an innovative, premium-quality roof system for the biogas industry. The system comprises two separate membranes manufactured from polyester woven fabric, PVC-coated on both sides, with a minimum weight of 27 oz/yd² (900 g/m²) and a minimum tear resistance of 900 lbs per 2 in. (4,000 N per 5 cm). The double-layer assembly is designed to even out ...
-
Manufactured by PlanET Biogas USA Inc.based in USA
An important new development is the PlanET eco® jet, which ensures the continuous supply of nutrients to the gas space via an innovative injection system, thereby creating optimal biological conditions for the colonization of bacteria. The coarse mesh (50x50x5 mm) of the PlanET eco® coverG is both a carrier medium for hydrogen sulphide bacteria and at the same time permeable to ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
The Model 20 HT/GT agitators feature a high-efficiency gearbox designed specifically for agitator service. Models are available in right angle and parallel shaft configurations. These agitators feature a modular design package with a wide range of speeds for improved process control and greater application versatility. The Model 20 HT/GT agitators are designed to meet AGMA, OSHA, ANSI, IEC, DIN, ...
-
Manufactured by DMT Environmental Technology BVbased in NETHERLANDS
Standard system for removal of H₂S out of biogas. DMT has developed the DMT Sulfurex gas desulphurisation scrubber. The DMT-Sulfurex desulphurisation process has proven to be cost effective for smaller applications (see references) due to its low capital and running costs, whereas traditional gas desulphurisation systems are not designed for smaller applications and can only be cost ...
-
Manufactured by Ducon Technologies Inc.based in USA
Ducon mainly provides the following types of Flue Gas Desulfurization ...
-
Manufactured by Kahn & Company, Inc.based in USA
Kahn offers numerous systems for specific gas purification applications. Some examples are: ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
recision Combustion Inc. is developing integrated fuel processor systems to enable fuel cells to operate using a wide range of available fuels ranging from gases (e.g. methane and propane) to conventional liquid fuels (diesel, gasoline and military logistics fuels including JP-8, JP-5, and Jet A) to alternative and unconventional liquid fuels such as biofuels and waste hydrocarbons recovered from ...
-
Distributed by PCC Energy Groupbased in USA
PCC Energy Group produces a range of high-nickel, high-performance heat and corrosion resistant alloys available as flat products – plate, sheet and strip. In our facility dedicated to nickel alloys, we produce the industry’s largest available plate sizes with unparalleled ...
-
Distributed by BIOFerm™ Energy Systemsbased in USA
COCCUS is a complete mix anaerobic digester designed to run at the mesophillic temperature range. It is designed for input materials with low solids content (between 8 – 12%). The tank is a reinforced concrete design with 2 or 3 large REMEX paddle mixers. The drive motor of the mixer is mounted onto the outside wall of COCCUS so that only the polyamide bearings are located inside the ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
Iron based desulfurization media has low cost and high desulfurization capacity as its main advantage, however the chemical reaction occurring during the capture of hydrogen sulfide tends to agglomerate the media pellets in larger chunks which render the spent media removal a time consuming chore. For this reason the tendency for landfill gas and biogas desulfurization has been to use activated ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
THE SULFOX REG PROCESS for 0,5 to 3.0 g/Nm³ Concentrations: The SulfoxREG is a gas desulfurization process that convert sulfur in raw gas to concentrated sulfuric acid. The SulfoxREG process is designed for treatment of gas having H2S and CS2 concentrations from 0,5 to 3.0 g/Nm³ (in total). Using a highly efficient regenerative catalytic oxidizer system the plant can be operated without ...
-
Manufactured by Nel ASAbased in NORWAY
The M Series provides fast response times and production flexibility making it ideal for hydrogen generation utilizing renewable power sources. With minimal maintenance and siting requirements, M Series electrolysers can produce up to 4,920 Nm3/h of hydrogen gas at 99.9995% purity on-demand. Featuring a scalable modular design that can be containerized, these systems offer solutions that are ...
-
Manufactured by PlanET Biogasbased in GERMANY
The PlanET eco® cover G is an improved technological solution for biogas co-desulphurisation. It combines different properties for optimal operation of the biogas plant and is the result of the further development of the desulfurization fleece cover PlanET eco® cover or PlanET eco® cover plus. The basic principle of the PlanET eco® cover roof construction remains intact, but the ...
-
Manufactured by DMT Environmental Technology BVbased in NETHERLANDS
Gas Desulphurisation of biogas and syngas is necessary to prevent corrosion and SOx emissions. Biogas is produced by fermenting biological waste and is considered one of the most important sources of renewable energy. It is a substitute for natural gas. Both biogas and syngas can contain hydrogen sulphide (H₂S), so desulphurisation is essential. Since the Sulfurex directly controls the ...
-
Manufactured by RPS Composites, Inc.based in CANADA
Coal-fired power plants produce boiler flue gases which must be scrubbed of chemicals and particulate before exiting through the stack. The internal and external lining in our FRP headers is virtually unaffected by the acid and high chloride environment inside an FGD tower that eats away at metallic piping. Small- and medium-sized FGD towers can utilized self supporting FRP header designs. In ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you