Only show results available in Virginia? Ok

Gas Engines Applications

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Power Generation

    Combustion turbines A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in-between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. The turbine shaft energy is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. The energy that is not used for shaft work comes out in the exhaust gases, so these have either a high temperature or a high velocity. A catalyst is often used to treat these exhaust gases to comply with emissions regulations. EmeraChem has installed OEM and after-market catalyst in over 240 applications

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Biogas boosting in biogas plant

    Biogas blower used to boost the biogas from the reactors to a pressures suitable for feeding to biogas burner or biogas engines.

    By Environmech Sdn Bhd based in Balakong, MALAYSIA.

  • Thermal structures insulation for power generation industry

    Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation requires.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Aquatech Water Management Solutions for Unconventional Gas

    Managing produced water from shale gas wells is challenging and requires a variety of solutions & services. Aquatech offers mobile and/or central facility solutions that provide customers to suit their needs. The demands of field operations on equipment and personnel require a high level of continued dedication, experience, & engineering. Aquatech delivers reliability on all of these fronts to ensure that water management & treatment enable gas production to proceed rapidly and efficiently. Our solutions ensure a consistent water composition, with minimal contamination. This enables predictable production characteristics such as consistent hydro fracturing and minimal down-hole scaling. Most import, Aquatech offers sustainable solutions that are friendly to the environment and to the gas producer. The industry needs treatment standards to exceed current and future regulatory requirements. Our commitment to sustainability sets a standard way beyond what many believe is possible today.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you