Gas Engines Articles

  • Fog Provides Cooling for Natural Gas Pipeline Compressor Stations Case Study

    High pressure fog enables pipelines to maintain production levels and stay online during hot weather conditions. After new compressor units were installed at a North Carolina compression facility, the cooling systems began to reach capacity causing the compressor to overheat due to hot weather conditions. The plant compression engineer chose MicroCool fog systems to provide adjunct cooling ...


    By MicroCool

  • Acuaes - Vigo - Lagares - Case Study

    Client: Acuaes Solution: CambiTHP - B6 Vigo Vigo is a new WWTP in northwest Spain. The new plant is the largest bio-filtration in Spain and one of the largest in Europe. Designed for 800.000 inhabitants – equivalents. This plant treats sludge from several municipalities in and around Vigo. Cambi has installed his thermal ...


    By Cambi Group AS

  • More Power & Efficiency on a 7FA in the Middle East at 50°C Case Study

    Powerphase collaborated with the Tamimi Group of Companies and Saudi Electricity Company (SEC) to demonstrate Turbophase system’s ability to boost F-class gas turbine (GT) power output at the high ambient air temperatures that Saudi Arabian summers are known for. Besides having hot summers, Saudi Arabian labor costs are high such that any technology that reduces plant downtime can help ...


    By Powerphase

  • Codford Biogas Case Study

    Codford Biogas recycles waste to supply 100% renewable electricity. It seems only fitting that we should also be providing flexibility to support growing levels of renewable generation on the system. Our partnership with Open Energi is helping us to safely and reliably manage our assets to deliver maximum value from the flexibility ...


    By Open Energi

  • Cyclone Series Air Assisted Flare With Model 850 Flamex Ignition System - Case Study #170604

    Project Details Location: Freeport, TX Max Inlet Flow Rate: 12,765 lbs/hr Smokeless Flow Rate: 0 ‐ 100% of Max Flow, Meets Ringelmann1 Molecular Weight: 58.30 Flare Gas LHV: 3013 Btu/SCF Required Inlet Pressure: 12 psig ...


    By AEREON

  • Ghost Series Enclosed Combustor AB-200 - Case Study #170403

    PROJECT DETAILS Location: RockyMountains FlowRate: 1.75MMSCFD InletPressure: 9”WC Heating Value: 227 BTU/SCF Application: Coal Mine Methane Recovery ...


    By AEREON

  • HeatBlocker for the Power Generation Industry - Case Study

    Kalb Corporation manufactures HeatBlocker Exhaust Insulation systems for large generator sets used extensively in the power generation industry. The superior design and heavy duty materials used in our insulation systems guarantee that end users will receive maximum benefits from their application. HeatBlocker Exhaust Insulation Systems do an excellent job of reducing engine ...


    By Kalb Corporation

  • Clarke Energy Supplies Jenbacher Gas Engines to Power New Algerian ‘Mega Mosque’

    Clarke Energy to Deliver Four of GE’s Jenbacher J320 Gas Engines to Power Trigeneration Plant at Djamaâ el Djazaïr Mosque being Built in Mohammadia, Near Algiers Jenbacher Trigeneration Units to Supply Reliable, Lower Emission Power, Heating and Cooling Project Highlights Growing Industrial Demand for Advanced Trigeneration Technologies ALGIERS, ALGERIA ...


    By Clarke Energy

  • Fuelling Energy Savings Case Studies

    Magnatech units are being used in a wide variety of commercial premises, saving small and large businesses millions year-on-year, as well as delivering substantial CO2 savings. Atmel A trial by microprocessor manufacturer Atmel, which used sensitive recording equipment to measure boiler performance, showed that once fitted to its 5MW boiler, Magnatech’s units ...

  • Fond du Lac, WI – Biogas Application Profile - Case Study

    About the Project The Fond du Lac Regional Wastewater Facility modified it’s biogas handling system in 2012 to include a process to biologically removal hydrogen sulfide; physical adsorption of siloxane compounds; moisture removal, a new biogas-fueled engine and a liquid storage system for receiving hauled in high-strength waste. The methane produced by ...


    By Biorem Technologies Inc.

  • McCain - Case Study

    Longer life for gas engine after H2S removal Potato processing company McCain in Lelystad, the Netherlands, receives biogas from both the anaerobic water treatment and the solids digester. The biogas - derived from fermenting potato peels - contains high levels of hydrogen sulphide. To prevent corrosion of the gas engine that uses the biogas as a power source, ...


    By Paques B.V.

  • Bavaria - Case Study

    Over 25 years of smoothly running wastewater treatment at a brewery In 1984, Dutch beer brewer Bavaria needed to increase its wastewater treatment capacity. Paques installed a BIOPAQ®UASB to its existing aerobic clarification plant, reducing aerobic sludge and aeration cost. Over 25 years later, the installation still runs smoothly and treats 10,000 kg COD ...


    By Paques B.V.

  • Industriewater Eerbeek - Case Study

    Dealing with H2S in biogas from papermills Industriewater Eerbeek in the Netherlands treats wastewater from three different neighbouring paper mills. The biogas is used in a gas engine to generate electricity. The UASB-type bioreactors of the paper mills produce biogas that is polluted with hydrogen sulphide. To protect the gas engine from corrosion, the ...


    By Paques B.V.

  • Waukesha Engine Upgrade Boosts Efficiency, Availability and Helps Stabilize Grid in North-East India - Case Study

    To help India augment its energy basket, North Eastern Electric Power Corporation Limited (NEEPCO) recently installed three of GE’s Waukesha 275 GL+ engines as part of a gas booster station upgrade. The enhanced engine output, efficiency and availability has helped to ...


    By Clarke Energy

  • Waukesha Engine Upgrade Boosts Efficiency, Availability and Helps Stabilise Grid in North-East India

    To help India augment its energy basket, North Eastern Electric Power Corporation Limited (NEEPCO) recently installed three of GE’s Waukesha 275 GL+ engines as part of a gas booster station ...


    By Clarke Energy

  • 21MW Peaking Plant Delivered to Ashford Power, UK - Case study

    Clarke Energy delivered a full turnkey, design and build 21MW electricity generating peaking plant, at Ashford Power, Kings North Industrial Estate, Kent. The plant was delivered within a 40-week ...


    By Clarke Energy

  • Gas & Diesel Engine Applications - Case study

    Introduction There are many types of stationary and mobile internal combustion engines that can run off gas or diesel fuels. Engines can be lean burning at a high air to fuel ratio (AFR) or rich burning at a low AFR. The exhaust stack gases from engines contain pollutant gases including CO, NO, NO2, NOx, and CxHy hydrocarbons ...

  • Dacian Gold’s Mt Morgans Gold Project, Australia - Case study

    Energy solutions provider Zenith Energy have signed a power purchase agreement (PPA) with Dacian Gold to deliver a 17MW gas fired power station at Mt Morgans Gold ...


    By Clarke Energy

  • St. Cloud Duel Fuel Engine, USA - Case Study

    In 2016, St. Cloud Wastewater Treatment Facility selected GE Jenbacher as the dual fuel engine of choice for their new renewable energy plant. For most cities, wastewater and drinking water treatment plants are major energy hogs so when St. Cloud was looking for ways to reduce ...


    By Clarke Energy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you