Gas Engines Equipment For Fossil Energy In Connecticut
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
PCI is developing several fuel reforming catalytic reactors for integration into fuel processor and fuel cell power systems including: Catalytic Partial Oxidation (CPOX) of methane, propane, gasoline, Jet A, JP-8 and diesel, Autothermal Reforming (ATR) of gasoline, Jet A, JP-5, JP-8 and diesel, Oxidative Steam Reforming (OSR) of methanol, Steam Reforming (SR) of methane, ...
-
based in USA
Introducing the J920 FleXtra Jenbacher with 49% el. efficiency 60Hz. GE proudly announces the J920 FleXtra Jenbacher 9.5 MW system for 60 Hz with best-in-class 49% el. efficiency for large gas engine power plants at APPA, Denver on June 16th. Whether you're seeking full power at high efficiency levels or a unit capable of short start-up times. GE's J920 FleXtra gas engine is an ideal, reliable ...
-
Manufactured by Englert, Inc.based in USA
The MetalMan Multi-Panel Roofing Machine is a state-of-the-art roll forming machine that runs more sizes, gauges and types of material in up to ten panel configurations with minimum adjustments and less scrap. Forming rollers for each profile can be changed out by only one man in 30 ...
-
based in USA
In response to a growing global demand for high-efficiency, simple-cycle power generation, GE introduced the world's first two-stage turbocharged gas engine, the Jenbacher J624. More economically practical than gas engines with single-stage turbocharging, the J624 with advanced two-stage turbocharging is based on proven technology from the automotive industry and GE's Type 6 gas engine design ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
NOx emissions are a primary contributor to air pollution, and their control is a primary focus of air pollution regulations. PCI is developing a gas turbine engine catalytic combustor that enables low single digit ppm NOx emissions along with high combustion stability, a wide turndown range, and substantial fuel flexibility. PCI's RCL® catalytic combustor technology is a breakthrough, ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
Precision Combustion, Inc. (PCI) has developed a catalytic combustor technology breakthrough that offers to fulfill the promise for a downhole steam generator for oil and gas production, a tool that has been long-sought by the oil and gas production industry. We are currently working to develop this technology into a practical tool for oil and gas production. We are interested in discussing ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
PCI's catalytic pilot burner technology is a simpler, less expensive and retrofittable version of our catalytic combustor, catalytically-stabilizing only a portion of the engine's fuel, but using that portion to enable improved combustion stability throughout the catalytic combustor. This is an 80/20 modification, seeking to deliver most of the benefits of a full catalytic combustor at a fraction ...
-
based in USA
The result of continuous enhancements and extensive experience, GE's Jenbacher Type 6 gas engines are an advanced and reliable addition to our product line. Serving the 1.5 to 4.4 MW power range, the 1,500-rpm engine speed results in a high power density and low installation costs. In addition, the Type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 249 Series Enclosed Flare is a flare specifically designed for biogas application. It is primarily used in areas where flare stack emissions are controlled and regulated. The sophisticated design of the 249 Series is a top-of-the-line, full-featured, drop-ship product, where all eventualities have been carefully considered at the design phase. After the product is shipped, our ...
-
Manufactured by John Deerebased in USA
Service life of 6 years / 6,000 hours, Fully formulated for heavy-duty cooling systems, Environmentally friendly and non-toxic, Propylene glycol base, Thermally stable, Contains bittering agent, Recommended for heavy- and light-duty diesel, natural gas, and gasoline engines, Pre-mixed ...
-
Manufactured by John Deerebased in USA
Service life of 6 years / 6,000 hours, Fully formulated for heavy-duty cooling systems, Reduces downtime and lowers operating costs, Protects against corrosion and cavitation, Thermally stable, Mix on-site, Contains bittering agent, Recommended for heavy- and light-duty diesel, natural gas, and gasoline ...
-
Manufactured by John Deerebased in USA
Service life of 6 years / 6,000 hours, Fully formulated for heavy-duty cooling systems, Reduces downtime and lowers operating costs, Protects against corrosion and cavitation, Thermally stable, Pre-mixed with premium quality water, Contains bittering agent, Recommended for heavy- and light-duty diesel, natural gas, and gasoline engines, Pre-mixed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you