Gas Powered Turbine (Gas Power Generation) Equipment
-
Manufactured by IHI Corporationbased in JAPAN
LM6000 is a simple-cycle, 2-shaft, high performance gas turbine derived from the core of GE’s reliable air craft engine, CF6-80C2. CF6-80C2 has logged more than 76,500,000 operational flight hours, a 99.97% dispatch reliability, and commercial aviation’s lowest shop visit ...
-
Manufactured by Mee Industries Incbased in USA
generates proven results. Fact: A MeeFog™ Inlet Air Fogging System will increase your gas turbine power output at a fraction of the cost of new power generation equipment. As the original developers of inlet air fogging technology, Mee Industries will increase your gas turbine ...
-
Manufactured by Combustion Associates Inc. (CAI)based in USA
CAI’s Spirit 2 MW is an Industrial Gas Turbine Power Generation package that is custom designed for continuous, reliable operation where power needs are most critical. It is ideal for Distributed Generation – power generated at the point of use. This one-module ISO containerized system that can be ...
-
Manufactured by Combustion Associates Inc. (CAI)based in USA
a proven aero-derivative gas turbine that gives over 40 million hours of operation and is specifically modified for alternative fuel operation. ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX300 has a compact industrial design which enables high effIciency (nominal 31%) and excellent emissions performance. These characteristics provide the flexibilty to meet the needs of a broad range of power generation applications. The SGT-300 single-shafted industrial gas turbine is a proven unit for all electrical power ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The 501-KB5 aeroderivative gas turbine engine shares commonality with the other single-shaft 501-K engines. Its low mass flow and high exhaust temperature makes the KB5 the ideal engine for ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX501-KB7 package builds on the reliable KB5 with the addition of a zero stage to the compressor inlet of the Siemens turbine. This increases mass flow and pressure ratio, thus increasing performance and efficiency and boosting power output to over ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
efficiencies of 80% or higher. Incorporating proven gas turbine technology, the CX400 engine offers cost-effective power for a wide range of ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
efficiencies of 80% or higher. Incorporating proven gas turbine technology, the CX400 engine offers cost-effective power for a wide range of ...
-
Manufactured by FAIST Anlagenbau GmbHbased in GERMANY
As an operator of a gas power station you are aware of the challenge: gas power stations are important elements in energy-generation mixes with their stand-by duty and flexibility in power generation in line with requirements. Yet the competition from modern coal-fired power plants and renewable ...
-
Manufactured by LPP Combustion, LLCbased in USA
Upgrade in-place gas-turbine power stations with add-on LPP Combustion low-emissions multi-fuel equipment. Fuel with diesel or various other lower-cost fuels, achieving emissions are on par with natural gas. Retire old diesel ...
-
Manufactured by Distributed Power Solutions (DPS)based in USA
The Centaur 40 Mobile Power Unit is the answer to your need for short term generating capacity that is both economical and environmentally friendly. Designed as an on-site generating system where low emissions, fast setup and reliable operation are critical, these units are based on the proven Centaur 40 gas turbine generator ...
-
Manufactured by Distributed Power Solutions (DPS)based in USA
The Taurus 60 Mobile Power Unit (T60 MPU) is the answer to your need for short term generating capacity that is both economical and environmentally friendly. Designed as an on-site generating system where low emissions, fast setup and reliable operation are critical, the T60 MPU is based on the proven Solar® 5.7 MW Taurus™ 60 gas ...
-
Manufactured by Iqony GmbHbased in GERMANY
Energy plants are the heart of your production. They have to supply heat and power reliably – and increasingly sustainably and renewably, while ensuring a high level of availability. Cogeneration technologies, such as combined-cycle gas turbine (CCGT) power plants, the use of energy from renewable sources, the use of ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan™ 250 is our most powerful gas turbine package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130, while providing 40 percent shaft efficiency with emissions reduced by up to 30 ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The Continental Controls Corporation Black Box, also known as the CCC Black Box, is a specialized device used to monitor and control engines. It is a compact, rugged electronic control unit that is designed to withstand the harsh conditions. The CCC Black Box is primarily used in gas turbine engines, and it is responsible for managing a wide ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you