We couldn't find any gas turbine exhaust equipment suppliers or service providers located in Africa
Here is a list of equipment results with suppliers serving Africa
Gas Turbine Exhaust Equipment For Fossil Energy Available In Africa
-
Manufactured by Braden Groupbased in USA
The Innova anti-icing system prevents frost and ice formation on inlet components to protect the gas turbine, and prevent pressure drop buildup. Icing can damage blades, filter elements and other vital parts even in temperatures above freezing—ice crystals form at less than 40⁰F and greater than 50% relative ...
-
Manufactured by Schock Manufacturingbased in USA
Schock can custom design Inlet ducting and plenums to meet your acoustic and inlet flow requirements. We can design using internal or external ...
-
Manufactured by Eagle Filters Ltd.based in FINLAND
EFiCELL Pre-Filters are designed to ensure high capacity filtration when available space is limited or processed air flow is high. The Snap-On design allows operation in combination with EFiCELL or MAGNUM final filters.EFiCELL pre-filters have been developed specifically for demanding processes, adverse environmental conditions and extreme volume flows.EFiCELL pre-filters are the best solution in ...
-
Manufactured by Schock Manufacturingbased in USA
We will optimize your Inlet silencers to be effective and cost efficient. We primarily use 304 Stainless Steel materials so that corrosion does not become a ...
-
Manufactured by Lummus Technologybased in USA
Lummus Technology has designed and built fired heaters to meet refining and petrochemical industry needs, including refinery heaters, steam superheaters, heaters for delayed coking units and steam reformers, and our patented SRT® (Short Residence Time) pyrolysis heaters for ethylene production. Our heaters can be designed to operate under natural draft, forced draft, induced draft or balanced ...
-
Manufactured by Flame Spray SpAbased in ITALY
Gas turbines are generally considered the most cost effective and relatively environment-friendly large scale power generation technology, but their capacity as well as their thermal efficiency degrades under high ambient temperature conditions. Fogging Systems provide the most cost effective technique to recover this lost gas turbine capacity through adiabatic cooling of the gas turbine inlet ...
-
Manufactured by EMW Filtertechnik GmbHbased in GERMANY
Compact filters owe their name to their compact, space-saving construction. They provide maximum media area within minimum volume, offering an optimum combination of high filtration efficiency and low pressure drop. As a result, compact filters attain long service life even when used with high volume flow rates and high inlet particulate ...
-
Manufactured by Eagle Filters Ltd.based in FINLAND
Eagle Filters' TurboMaster EPA is a new era in static filtration replacing ineffective and high pressure drop pulse filters to absolute cleanliness securing static filtration system without changing any construction of the air intake ...
-
Manufactured by Rakhoh Industries Pvt. Ltd.based in INDIA
Waste Heat Recovery Boiler processes gas turbine and biogas gensets exhaust. It is customized in both smoke tube and water tube type construction with a compact design. It offers higher efficiency and fully automated ...
-
Manufactured by CECO Environmentalbased in USA
The gas turbine diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree bend. Our Peerless-Aarding brand Gas Turbine Diffusers and Plenum is specifically engineered to cope with strong gas turbine ...
-
Manufactured by CECO Environmentalbased in USA
Simple cycle gas turbine operation is a fast and reliable way to provide flexible power demand at short notice, and we provide a range of solutions that support effective cyclic operation and the changes in thermal load which are part of the frequent start and stop cycles. Each Peerless-Aarding brand Gas Turbine Single Cycle Exhaust System design is constructed for internal stud spacing, stud ...
-
Manufactured by HIFYBERbased in TURKEY
HIFYBER-GT products are used for gas turbine air intake filters. Our innovative high efficiency nanofiber based filter media provide perfect pulse cleaning and lower prossure ...
-
Manufactured by CECO Environmentalbased in USA
Our custom Peerless-Aarding brand Gas Turbine Internal Insulation designs are engineered to deliver maximum performance, durability and reliability based on the latest operational requirements and newest materials. In our cold casing design, the insulation system is fitted to the casing interior using a custom-designed support system. The protective sheeting in our gas turbine insulation is ...
-
Manufactured by Babcock & Wilcox Vølund ABbased in SWEDEN
Optimus optimizes the customers’ return on investment by studying critical operating parameters including space availability, operating temperatures, fuel consumption, system capacities and many other factors. Optimus unfired waste heat boilers recover valuable BTU’s from hot process gas or gas turbine exhaust. The boilers are designed and constructed to Section I of the ASME Code for ...
-
Manufactured by Braden Groupbased in USA
With over 4,500 units installed worldwide Braden’s Gas Turbine Air and Exhaust Gas Handling equipment forms integral parts of a power generation system. Our products enable and manage the “clean” airflow of the system allowing clean power to be generated worldwide. ...
-
Manufactured by Atomizing Systems, Inc.based in USA
Fog cooling system basically consists of fog nozzles installed on stainless steel arrays typically placed across the section of the gas turbine inlet air ducting before or after the air filter; high-pressure stainless steel head pumps supply water from 1000 to 3000 psi (70-200 bar); pre-filter unit at pump water inlet to block big particles (bigger than 1 micron) in water; distribution feed lines ...
-
Manufactured by Aprovis Energy Systems GmbHbased in GERMANY
The cheapest energy is energy that is only captured in existing systems to make it usable, instead of having to produce it afresh elsewhere. And the better the components you use to do this, the greater the savings in terms of resources and costs. APROVIS is a professional and high-performance company operating in the field of exhaust gas heat exchangers. For more than two decades, the company ...
-
Manufactured by CECO Environmentalbased in USA
To achieve higher efficiency levels, gas turbine waste heat is used to generate process steam or steam turbine operation. Our Peerless-Aarding brand Gas Turbine Bypass Exhaust Duct allows flexible operation of the power island as well as the capability of starting the gas turbine in rapid starting mode and allowing the heat recovery steam generator (HRSG) to gradually come online. ...
-
Manufactured by CECO Environmentalbased in USA
The gas turbine exhaust Diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree ...
-
Manufactured by CECO Environmentalbased in USA
Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules where steam is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you