Energy Industry Equipment In Connecticut
-
PremiumManufactured by Hilliard Corporationbased in USA
The Inferno Fury is an economical racing clutch designed for durability. The sprockets are heat treated steel and the hub is heat treated. The Fury is available with an oil impregnated bronze bushing, or a needle bearing. The Fury is a long lasting low maintenance design with some tunability. The Fury clutch can handle excessive heat and give you consistent torque all race season. The Fury clutch ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The patented Hilliard Extreme Duty Centrifugal Clutch has been engineered in pulley and sprocket versions to provide long service life and is ideal for retrofit or new equipment applications. A thermodynamically designed clutch shoe increases the clutch’s capacity to absorb heat without damaging the integrity of the ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Torque limiters and couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment. These clutches include one or more friction discs mounted on an inner hub, a single nut adjustment to easily pre-sets the torque. Similar static and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is off ered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M300 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M300 brake caliper is capable of producing a maximum 10,600 LBF (47 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of braking force at 1800 psi (124 bar) and has been ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M200 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M200 brake caliper is capable of producing a maximum 5,000 LBF (22 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard MK750 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO PH-CGJ style filter elements incorporate conductive fibers which are co-pleated in between two layers of hi-performance microglass filter media. As a result the HILCO anti-static filter element dissipates static charge build up before discharge can occur. These style elements are available in every standard HILCO media grade ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard Auto-Lok Differential offers equal power transferred to both wheels on an axle regardless of traction, allowing positive back drive through both wheels. The self- contained unit locks and unlocks automatically providing the benefits of both an open and locked differential, depending on the ground conditions. Benefits include improved traction and easier operation and ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard MK1400 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as theatrical stage lifts, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK1400 is capable of producing a maximum 1,400 LBF of braking force with up ...
-
Manufactured by Ecorad Canada Incbased in CANADA
An electrified radiator is as easy to install as a baseboard heater. Please note, heating capacity is a function of the radiator ...
-
based in USA
GE is one of the largest manufacturers of major appliances in the world. Since 1907. we have been introducing advanced appliances to improve peoples" lives. We"re continuing thot legacy today with energy conserving innovations like the Advantium oven, the Harmony clothes care system, and ...
-
based in USA
GE developed America"s first turbojet engines and continues to advance the industry with our innovative GE90 and GEnx engines. Today, we supply the world with engines for the commercial, corporate, military and marine industries. We also provide technology upgrades, engine exchange services, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you