Energy Industry Equipment In Michigan
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard BBH1 Power Unit is a base model that includes on/off and ramped braking modes. With integral manifold mounting and heavy duty pump with fail-safe design, many options are available to customize the system to the specific needs of the ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard MK1400 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as theatrical stage lifts, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK1400 is capable of producing a maximum 1,400 LBF of braking force with up ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is off ered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard Auto-Lok Differential offers equal power transferred to both wheels on an axle regardless of traction, allowing positive back drive through both wheels. The self- contained unit locks and unlocks automatically providing the benefits of both an open and locked differential, depending on the ground conditions. Benefits include improved traction and easier operation and ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco offers an alternative to string wound elements. Improve the ISO cleanliness level in your system by taking advantage of the Hilco 330 Series elements. Hilco offers both the standard 330 & 330 extended tube models as direct replacements. Available in both disposable and washable designs, metal or nylon end cap configuration. ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco manufactures complete fuel filtration systems which can incorporate all or any combination of these contaminate removal techniques. Put Hilco’s expertise to work in solving your most difficult liquid fuel filtration ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Standard disc diameters range from 6 inches to 54 inches, with other sizes supplied to order. Discs are bored and drilled to fit Hilliard standard Hubs, meeting customer ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M300 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M300 brake caliper is capable of producing a maximum 10,600 LBF (47 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 3419MX pump is designed with Cornell's renowned quality and durability. It features a 3" discharge, 4" suction, and enclosed impeller. Cornell's patented CycloseaP design is standard, with a Type 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide seal faces for abrasion ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electric with HT Thermal Storage for Heating Water and DHW Heater (In one package). This is one unit multipurpose in the boiler room. It has independent control of Water Heating, Domestic Hot Water and Glycol ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Inferno Fury is an economical racing clutch designed for durability. The sprockets are heat treated steel and the hub is heat treated. The Fury is available with an oil impregnated bronze bushing, or a needle bearing. The Fury is a long lasting low maintenance design with some tunability. The Fury clutch can handle excessive heat and give you consistent torque all race season. The Fury clutch ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of braking force at 1800 psi (124 bar) and has been ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is off ered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" ...
-
based in USA
Development according to ISO 26262 up to ASIL C / EN 61508 SIL 2 possible. Tested safety (e.g. ECE R10, UN 38.3, ECE R100) and “real world” experience. Multi-level short circuit protection on cell and system level. Additional operating safety due to redundant battery management system. Suitable for multi-string systems with monitoring on single-string and full system level. Protection ...
-
Manufactured by REB Research & Consultingbased in USA
Exceed normal thermodynamic limits by performing an equilibrium-limited hydrogen generation reaction while extracting a product, pure ...
-
Manufactured by TOYOBO U.S.A., INC.based in USA
HARDLEN is resin grafted with Chlorine/and (or) maleic anhydride (CPO). HARDLEN® is designed to bond to polypropylene and other olefin-based (low surface energy) substrates including ABS, EPDM, PE, TPO, steel, and ...
-
Manufactured by Froniusbased in AUSTRIA
For charging or charge conservation of conventional lead acid, lead calcium/silver batteries, or those of the sealant type (AGM, MF), as well as maintenance-free lead GEL batteries. Batteries of various types, with different levels of charge, can be charged simultaneously. Each individual charging circuit can be used for testing and charging. Indication of battery charge status using bar charts ...
-
based in USA
The Noble Gas Systems 350-bar conformable hydrogen tank technology demonstrates its capabilities and benefits in real-world driving conditions. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you