Gas Turbine (Gasification Systems) Equipment
-
Manufactured by Energy Technology Centre Ltdbased in UNITED KINGDOM
Energy Technology Centre's gas turbine is available for research and development of fuels and associated ...
-
Manufactured by SteEnova GmbHbased in GERMANY
Only gasification allows to convert solid biomass to reach high efficiency in combined heat and power generation in the decentralized sector. Due to this Seenova has developed an fluidized bed gasifier which was optimized and tested and ready for market ...
-
Manufactured by enkotherm GmbHbased in GERMANY
Hot water application. Turbine: Capstone CR800. Thermal output: 810 kW. Dimensions: 560 x 180 x 300 cm. Weight: 4400 ...
-
Manufactured by CECO Environmentalbased in USA
Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules ...
-
Manufactured by Ener-Core, Inc.based in USA
The Dresser-Rand Power Oxidizer 2 MW (KG2-3GEF/PO) Powerstation’s gas turbine with Ener-Core Power Oxidizer technology is the only clean power generation that runs directly on low pressure, low-quality gases that otherwise could not be used. The system integrates oxidation technology with the field proven 2MW-KG2-3G gas ...
-
Manufactured by GreenTech Heatingbased in GREECE
The EN boiler is steel, flamed, pressure type and designed to operate with oil or gas. The boiler construction provides a large combustion chamber volume, efficient heat transfer and sophisticated flue gas turbines. The boiler is of high resistance, designed for operation with an oil or gas burner. The construction is robust and ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat gas processing plant solutions transform waste heat from gas turbine exhaust into viable and valuable power. This ability reduces overall plant power consumption from the grid and provides a cost effective power ...
-
Manufactured by BETH Filtration GmbHbased in GERMANY
BETH® tar-electric filters are a special development for use in coking plants and behind biomass-/wood gasification plants for the protection of downstream gas engines or gas turbines. Hydrocarbons, tar, oil, fly ash are securely filtered out of the gas flow from 20 g/Nm³ tr. to up to 10 mg/Nm³ ...
-
Manufactured by Cratech, Inc.based in USA
This advanced Biomass Fueled Power Plant will convert organic waste to a syngas using a patented pressurized gasification system. The syngas is used to fuel a gas turbine which generates electricity that can be transmitted to the electric power grid. But unlike other technologies, Cratech's unique system is less complicated, more ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
measure percent levels of oxygen in the sample gas ...
-
Manufactured by Maxim Power Corp.based in CANADA
The Milner 2 (“M2”) power plant is currently a 300 MW state-of-the-art Combined Cycle Gas Turbine (“CCGT”) unit located at the HR Milner Generating Station near Grande Cache, Alberta. The M2 CCGT unit benefits from significant existing infrastructure at the brownfield site, including the existing M1 steam turbine ...
-
based in USA
or gas ...
-
Manufactured by Royal Dahlman BVbased in NETHERLANDS
Royal Dahlman has participated in the design of several combined heat and power plants with our OGLA tar removal system and our knowledge on the overall plant integration. Most work has been done on GE-Jenbacher type 6 gas engines and Caterpillar 3516A+ gas engine, nowadays replaced by the 3516C gas engine. Royal Dahlman realised two OLGA ...
-
Manufactured by Leme Engenhariabased in BRAZIL
The need to expand the energy matrix in Brazil and Latin America implies the diversification of energy sources. Thermal Power is a feasible technical and economical alternative for expansion of the local power generation systems, as it offers power stability and provides safe operational features for the electrical systems. Being aware of this, we have the Thermal Power Product Line ready to meet ...
-
based in USA
The FastOx system uses heat, steam and oxygen to break down waste at the molecular level. Organic materials turn into an energy-dense syngas. Inorganics melt into a non-leaching stone. Waste undergoes complete conversion into high value products without burning. There are no toxic byproducts and no ...
-
Manufactured by Systema S.p.A.based in ITALY
Two-stage direct-fired absorption chiller/heater SYDFA BYZ.Economically providing efficient chilled water for air conditioning, hot water for heating and sanitary hot water (simultaneous or ...
-
Manufactured by Burmeister & Wain Scandinavian Contractor A/S (BWSC)based in DENMARK
A substantial part of the world’s growth in power generation will continue to be based on coal for decades. At the same time there is a requirement for reduction of harmful emission from coal fired units and also an increasing demand for limiting greenhouse gas (CO2) ...
-
Manufactured by GE Powerbased in USA
GE integrates technology, experience, and people to deliver the highest-value simple-cycle and combined-cycle power plants anywhere in the world. This value comes from technologies that provide the lowest lifecycle cost of converting fuel into ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...
-
Manufactured by Allied Environmental Technologies, Inc.based in USA
Gasification is a century old technology, which flourished quite well before and during the second world war. Gasification can be broadly defined as the thermochemical conversion of a usually solid or liquid carbon-based material into a combustible gaseous product. The technology disappeared soon after the second world war, when liquid fuel became easily available. The interests in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you