Gasification Systems Equipment For Fossil Energy In Africa
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta nHRi Venturi Steam Trap is designed for high-load process applications including heat exchangers, reboilers, BJSIFBUFST, etc. The nHRi has a removable insert. " strainer DBObe fitted upstream of the ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV-UC Venturi Steam Trap with floating universal connector has been specifically designed for trace heating and line drainage applications as well as small to medium heat exchanger applications. The two-bolt floating universal connector system is a permanent replacement venturi orifice steam trap that will fit onto any standard universal connector flange. With primary and secondary ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta SCi Venturi Steam Trap is designed for medium to large process applications including heat exchangers, reboilers, air heaters, etc. The Delta SCi has a removable venturi insert. A strainer can be fitted upstream of the trap. ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV25 Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to medium to large process applications. The DSV25 has an integrated strainer and an in-line removable venturi insert. The body of the DSV25 does not have to be removed from the line for maintenance purposes. Access to the insert and strainers is through the top and bottom ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV Venturi Steam Traps are designed for multipurpose applications from line drainage, trace heating, through to medium heat exchanger ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to small to medium heat exchanger applications. The trap has a primary and secondary integrated strainer and a removable venturi insert. The body of the trap does not have to be removed from the line for maintenance purposes. Access to the insert and both primary and secondary ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Furnace gas is a gas which is produced in different types of furnace during the production of metals. High levels of power requirement and rising energy costs present a major challenge to the metallurgical industry. Some furnace gases created as a ‘free’ by-product during production processes serve as an attractive fuel for power generation. In addition to the economic benefit, using ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for heat, the alternative combined heat and power configuration may be a more useful engine ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The GE Jenbacher container is a high quality unit which can be deployed where economical and speedy installation is required. The GE Jenbacher containers are fully tested when they leave the production facility and are excellent for plug-and-play applications. The overall compact design ensures a space saving installation with service-orientated ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Abandoned mine methane (AMM) can be recovered from disused coal mines. Abandoned mine methane (AMM) projects produce energy (thermal and electrical) with the added bonus of reducing atmospheric emissions of methane. Methane is a potent greenhouse gas and huge amounts of methane will escape from the mine for years to come following closure. Sealed abandoned mines offer an excellent opportunity for ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON offers our own WILDCAT natural gas compression systems for wellhead applications as rental or lease equipment. Through testing, we can identify flow improvement up front and determine the appropriate standard system for your gas compression and budgetary needs. AEREON's gas compression systems have been used successfully for many years. Systems installed on coal bed methane wells, gas ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Biomass drying - necessary pretreatment for further processes. ANDRITZ supplies the complete process, not only for sludge treatment, but also for biomass drying - from wet milling to drying, fine milling and pelleting, all from a single ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents condensation and helps protect the engine from the ...
-
Manufactured by Nehlsen AGbased in GERMANY
Ecologically and economically biogas is an important renewable energy source - saving energy resources and forming an alternative to fossil fuels. In the absence of oxygen, materials like slurry and manure, food waste and other biomass are turned into biogas through the activity of micro-organisms. The biogas is then used to generate electricity, steam and heat in a combined heat and power plant ...
-
based in NORWAY
Aker Clean Carbon is leading SOLVit – a major scientific research and development programme to produce improved, cost-effective amines for the CO2 capture process. This eight-year NOK 317 million programme was launched in 2008 together with Sintef, an independent research organisation, and the Norwegian University of Science and Technology ...
-
Manufactured by Forbes Marshallbased in INDIA
Forbes Marshall Exhaust Gas/ Waste Heat Recovery Boilers (WHRB) or Exhaust Gas Boilers are fully packaged smoke tube industrial boilers equipped with advanced instrumentation to deliver maximum possible heat recovery. These boilers are ideal to recover heat from gen sets, incinerators, blast furnace exhausts etc. They enhance system efficiency and help save fuel and money. All Forbes ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...
-
Manufactured by Forney Corporationbased in USA
Forney Parallel Air Flow (PAF) burners are custom engineered for a wide range of heat inputs while providing the flexibility of firing a variety of fuel ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...
-
Manufactured by Henan Doing Machinery Equipment Co., Ltd.based in CHINA
Pyrolysis / thermolysis is the chemical decomposition of organic materials by heating in the absence of oxygen or any other reagents, except possibly steam. Tyre/plastic pyrolysis process refers to turning waste tyre/plastic into useful resources, such as fuel oil, carbon black, steel wire, etc. The green technology has been proved to be the most ideal method to deal with waste tyres pollution. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you