Only show results available in Connecticut? Ok

Gasification Systems services for Fossil Energy

  • Research and Development Services

    We foster R&D on gas in a number of different ways, e.g. by: Running a national Swedish joint frame program together with the Swedish Energy Agency. Arranging foras for R&D professionals to meet, e.g. Green Gas Research Outlook Sweden (GGROS), GasAkademin summer school, IBBA Seminar, Nordic Towngas forum and the SGC International Seminar ...

    By Svenskt Gastekniskt Center AB based in Malmö, SWEDEN.

  • Consulting and Team Augmentation Services

    All it takes is a phone call. Once we have an understanding of your company's needs, Bluewater Consulting Services is able to provide the seasoned professionals who will be best suited for your precise situation. We take the time to get to know our people before we send them to you. Your impression of that employee is also your impression of ...

    By Bluewater Energy based in Acworth (Atlanta), GEORGIA (US) (USA).

  • Production Of Fine Coke (Char)

    The Circochar process, a spin-off of the Circofer technology, produces fine coke and a valuable fuel gas from fine-grained volatile coals. This fine coke production, also known as ‘charring’, is based on Outotec’s circulating fluidized bed (CFB) technology, which has been applied in over 150 commercial plants worldwide ranging ...

    By Outotec Oyj based in Espoo, FINLAND.

  • Renewable Energy Sourcing Service

    Alternative and Renewable Energy - Equipment and Expertise Sourcing Support for India. Renewable Energy is growing at a fast pace in India. As a result, there is a critical need for equipment, skills and consulting expertise. We can help your company in identifying the most suitable vendors for these areas. Assisting Your Company in Sourcing ...

    By Energy Alternatives India (EAI) based in Chennai, INDIA.

  • Biomass Engineering Services

    ACT can take your biomass project from concept to commercialization, including development, design, testing, equipment fabrication, plant construction and start up. Our services include lab and pilot plant operations, automation, engineering, design and fabrication of complete process plants, skid-mounted plants and equipment. Thanks to our ...

    By Applied Chemical Technology, Inc. based in Florence, ALABAMA (USA).

  • Bio-Mass Services

    World Energy Development helps our clients navigate through the complex process required to successfully install renewable energy projects such as bio-mass plants.   With World Energy Development no project is too large or too small. Every detail is important to make a project successful. The right technology for the right application ...

    By World Energy Development LLC. based in CALIFORNIA (USA).

  • Energy Production

    CHO-Power is a new concept of energy from residual waste recovery, based on the process of gasification and improved by recent technological advances in plasma torches.The CHO-Power process transforms waste into BioSynGas (syngas) through gasification. The high temperature generated from the plasma torch enables to produce a very pure syngasof ...

    By Europlasma based in Morcenx, FRANCE.

  • Hydrogen For Ammonia And Syngas Plants

    The front end of every ammonia plant is a synthesis gas plant converting either natural gas feedstock from a pipeline, naphtha feedstock, or synthetic natural gas product from an upstream coal gasification unit into a useful gas mixture commonly referred to as synthesis gas (or syngas) composed of hydrogen, nitrogen, carbon monoxide, carbon ...

    By KBR, Inc based in Houston, TEXAS (USA).

  • Project Management Services

    Project management is critical: CPF has built a significant portion of its reputation on its expertise in planning, organizing, monitoring and delivering large projects, often several at one time. CPF has systematized a flexible and rigorous process for handling any size fabrication job to guide it from kick off meetings, to purchase order, to ...

    By Cambridge Pro Fab Inc. (CPF) based in Brantford, ONTARIO (CANADA). from Fabrication Services Service line

  • Plant Engineering & Maintenance Services

    As the fossil-fired power plant fleet in the U.S. gets older, issues of plant and equipment reliability and availability assume greater importance in their operational efficiency and profitability. Also, due to a highly competitive market where equipment manufacturers and engineering companies are aggressively pursuing market share, the cost of ...

    By Fossil Consulting Services, Inc. (FCS) based in Columbia, MARYLAND (USA).

  • Nexus of Water & Energy Services

    As Black & Veatch addresses the interdependency of water and energy, clients benefit from reduced water usage for energy output, and lowered energy consumption at water and wastewater plants.  Large amounts of electricity are required to acquire and process water, and large amounts of water are needed to produce electricity. This is the ...

    By Black & Veatch Corporation based in Overland Park, KANSAS (USA).

  • Biomass to Energy Solutions

    Linked to the recognition that the world population is growing, resources and fossil fuels are depleting, we are fully aware of the necessity to explore new and innovative ways of delivering sustainable power generation. We offer our customers solutions, from concept design through to plant handover and aftercare. Our experience covers delivering ...

    By Royal Imtech N.V based in Den HaagAshford, NETHERLANDS. from Energy Solutions Service line

  • Clean Energy

    We continue to depend overwhelmingly on resources that are neither clean nor renewable. Fossil fuels- coal, oil, and natural gas- provide 85 percent of the United States’ energy needs. The combustion of these fuels generates massive amounts of air pollution, which effects our health and contributes to climate change. Electricity production ...

    By Citizens League for Environmental Action Now (CLEAN) based in Houston, TEXAS (USA).

  • Thermal Energy Supply

    To date, about 90% of the operating boilers heat the room with gas, the rest – mainly coal. The first option is way to expencive, the other – not always convenient and environmentally friendly. Based on current realities, we developed a new activity, which was a well thought out idea.

    By Almaz-M based in Poltava, UKRAINE.

  • Renewable Combined Heat & Power Solution Services

    ZeroPoint's standardized CHP Solution is designed to produce enough synthesis gas to generate approximately 1.8 MW of electricity and 8.4 MMBtu/hr of recoverable heat for thermal applications. The ZeroPoint CHP approach allows power and heat to be produced with significantly higher conversion efficiencies than direct combustion of biomass. The ...

    By ZeroPoint Clean Tech, Inc. based in Potsdam, NEW YORK (USA).

  • Comprehensive Utilization Services

    As the first company franchise practitioners, as of the end of 2015, China has signed the coal-fired power plant flue gas desulphurization franchise contract unit capacity of 133 m.

    By Beijing SPC Environment Tech. Co., Ltd based in Beijing, CHINA.

  • Power Generationl Services

    In addition to renewable energy sources, the primary fuel sources of the global power market are coal, nuclear, natural gas and oil. However, to meet today’s current build needs, renewable sources are better positioned than traditional fuels. Nuclear capacity is not easily expandable due to the real and perceived environmental and security ...

    By US Renewables Group (USRG) based in Santa Monica, CALIFORNIA (USA).

  • Syngas Production

    The NT Plasmatron converts any hydrocarbon feedstock into syngas, which is a combination of hydrogen (H2) and Carbon Monoxide (CO). Viable feedstocks include municipal solid waste (MSW), coal, natural gas, tires, sewage, animal waste and agricultural waste.

    By XFuels Inc. based in Didsbury, ALBERTA (CANADA).

  • Gasifier Design & Development

    Consulting services focus on the following areas :- Fluidized bed gasifier design- Fixed bed gasifier design- Gasification simulation- Feedstocks pretreatment

    By Waste-to-Energy Consulting based in Ottawa, ONTARIO (CANADA).

  • Project Development and Consultation Services

    In joint cooperation with yourself and our cooperation partners, we design and develop project planning for integrated coal gasification technology to the stage of decision-making maturity.

    By CHOREN Industrietechnik GmbH based in GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you