Lean Gas Equipment For Fossil Energy
-
Manufactured by C-deg environmental engineering GmbHbased in GERMANY
Lean gases are gases that mainly consist of the inert components nitrogen and carbon dioxide and contain such a low concentration of oxidizable components as to preclude their use for energy utilization. Industrial exhaust air is a special kind of lean gas. Industrial exhaust air stands for air with traces of hydrocarbons below the lower ignition limit. They cannot be combusted spontaneously. Due ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
Designed specifically for operation with preheated combustion air, this burner series can have combustion air temperatures above 350°C up to 600°C. The air box of this burner is lined with fireproof concrete to prevent overheating - and above all to prevent unacceptable expansion - of the burner ...
-
Manufactured by A TEC Production & Service GmbHbased in AUSTRIA
A TEC GRECO kiln burners are the most advanced technology for burners firing pulverized fuel developed for rotary ...
-
Manufactured by BDI-BioEnergy International GmbHbased in AUSTRIA
Since 2010, the innovative bioCRACK technology has been essentially driven forward by the cooperative alliance between the Austrian mineral oil company OMV and BDI. OMV supported the project with resources and subsequent processing of the materials, as well as evaluation of the liquid ...
-
Manufactured by heat 11 GmbH & Co. KGbased in GERMANY
Fired heaters ensure low operating costs and highest energy efficiency. Fired heaters convince primarily by high heating capacities and simultaneously low operating costs with high energy efficiency. Especially the use of air-preheaters and waste heat recovery systems contribute to economic ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
This Burkhardt adaptation of the popular MAN D26 pilot injection gas engine of the CHP ECO 180 HG operates without pilot oil. Thus, it is operated on wood gas alone and is even easier to service. The pilot oil unit was removed. Instead, the wood gas-air mixture is ignited with spark plugs. The Burkhardt ECO 165 HG, together with the Burkhardt V 3.90 wood gasifier, generates about 165 kW ...
-
Manufactured by Leverage Incorporated NVbased in BELGIUM
Burners using lean gas or residual gas generally comprise a number of coaxial ducts or pipes arranged to supply a ring or rings of fuels centred on the axis of the burner and feeding liquids to the burner nose. These fuels are generally distributed in or around the circumference of a combustion air stream. The purpose of these elements is to achieve a sufficient fuel-air mixture to achieve ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
PCI's catalytic pilot burner technology is a simpler, less expensive and retrofittable version of our catalytic combustor, catalytically-stabilizing only a portion of the engine's fuel, but using that portion to enable improved combustion stability throughout the catalytic combustor. This is an 80/20 modification, seeking to deliver most of the benefits of a full catalytic combustor at a fraction ...
-
Manufactured by Isotex Corporation Pvt. Ltdbased in INDIA
Capacity – up to 15 TPH. Pressure – up to 26 kg/cm2. Fuels – Natural Gas / LPG / Spent gas / Diesel / FO / LSHS ...
-
Manufactured by Aurelia Turbines Oybased in FINLAND
Natural gas is a well-known fuel. Biogas can be regarded as “a renewable, but lean natural gas” – but where does it come from, what kind of role it can play in power generation? And what does it mean, when it is being said that “biogas does not have a ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
Originally, the SWP burner was developed in order to be able to offer an optimised body design for pressure applications. The simple shape of the burner case, composed of mainly cylindrical and conical shapes, allows the construction of a cost-effective and material-optimised burner for pressure ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
The V 3.90 Burkhardt wood gasifier, together with the ECO 180 HG (with pilot injection gas motor) combined heat and power plant or the ECO 165 HG (petrol engine), delivers electrical and thermal energy from wood pellets. Depending on which CHP we use, we are able to generate 260 - 270 kW heat and 165 - 180 kW of ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Furnace gas is a gas which is produced in different types of furnace during the production of metals. High levels of power requirement and rising energy costs present a major challenge to the metallurgical industry. Some furnace gases created as a ‘free’ by-product during production processes serve as an attractive fuel for power generation. In addition to the economic benefit, using ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
The concept of the CS - SWB burner has been proven hundreds of times and the burner has been developed and optimised over ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UF10 Lean gas range of flares are specifically designed for the closed and declining in gas landfill sites. Uniflare’s unique burner design has 100% proven track record with emissions standards set out by the Environment Agency and their guidance on flaring LFGTN-05 these units offer a cost effective solution to controlling the landfill gas once at lower calorific values past site ...
-
based in USA
The CONVERGE Academic Program empowers students, professors, and academic researchers globally to contribute to the advancement of science and technology. We offer exclusive license deals (free in the United States and Europe) for our industry-leading computational fluid dynamics software, CONVERGE, for academic research. In addition, we provide free support, training, and resources for our ...
-
Manufactured by Koch Heat Transfer Companybased in USA
Koch Heat Transfer hairpins are the industry standard for efficient performance and proven reliability. Backed by more than 300 years of combined engineering and manufacturing experience, our innovative designs and unique closures are a key element of more economical designs that offer ongoing operational savings. Learn more about putting the industry-leading expertise of Koch Heat Transfer and ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground flare systems and ancillaries to cover the needs of all ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
NOx emissions are a primary contributor to air pollution, and their control is a primary focus of air pollution regulations. PCI is developing a gas turbine engine catalytic combustor that enables low single digit ppm NOx emissions along with high combustion stability, a wide turndown range, and substantial fuel flexibility. PCI's RCL® catalytic combustor technology is a breakthrough, ...
-
Manufactured by Issendorff TPT e.K.based in GERMANY
Metal fiber burners are typically used in applications where uniform heating of the product by infrared radiation is advantageous. Both the burner output and the emitted radiant heat can be controlled over a wide range. The reaction times of metal fiber burners are just a few seconds. This allows the temperature curve required for an optimum heating process of the workpiece to be precisely and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you