Oil Combustion Equipment For Fossil Energy Available In Connecticut
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The Uni Condens 8000 F boiler type is a high-efficiency stainless steel condensing boiler. It is characterised by its flexibility and compact dimensions. Condensing boiler for apartment buildings and small-scale commercial applications of 50 to 115 kW. Seasonal room heating efficiency at up to 70 kW of 93%. Can be operated with gas or low-sulphur fuel oil with low emissions. Simple hydraulic ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- For the reliable fuel supply with oil - Suitable for all Bosch boiler systems with oil burner and ring mains supply - Preassembled for fast installation - Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- For the prewarming of viscous fuels - Suitable for all Bosch boiler systems with oil burner and ring mains supply - Increased operating reliability - Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are ...
-
Manufactured by Frederick Cowan Products by ICIbased in USA
12 JOULE: Produces 4-6 pulses per second at 200 watts. Desgineed for Ignition of #2 Oil Main Burners or Gas/Oil Fuel Ignitors. Useful on many non-retract applications. Uses same ignition electrode as 12 Joule units or works with compact 3/8" Dia. Probes. Special gas and “Flare Stack” models available. ...
-
Manufactured by Abbtas Boilers Pvt. Ltd.based in INDIA
Evaporator coils / assembly is being used in the modern thermal plants to increase the Boiler efficiency. The hot water from the drum is collected through downcomers and saturated steam is produced in the evaporators with the help of flue gases. The saturated steam is forwarded to the superheaters. Since, the evaporators are one of the most critical parts in the boilers, we produce the evaporator ...
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
Thermal oil heater complete with combustion air preheating system. Efficiency > 93%. TH/AR is the most efficient type of thermal oil heater. It is equipped with an especially engeneered combustion air preheating system, allowing to rise the efficiency of this unique HI-THECH boiler up to 94%. The Heater is composed of a multibolar spirally rolled furnace and body, completely shielded on front ...
-
Manufactured by AB&CO Groupbased in DENMARK
Water and steam are typically used as heat carriers in heating systems. But at high temperatures, water and steam requires a corresponding high operating pressure. In thermal oil heaters, a special oil (HTF) is used instead and it means that you can achieve operating temperatures up to 300°C at atmospheric pressure. The thermal oil heaters, type VTO and type ELVTO are customised and special ...
-
Manufactured by AB&CO Groupbased in DENMARK
AB&CO are a well-known Danish steam boiler manufacturer, who have specialised in customised high pressure steam boilers in high quality at reasonable prices. The supreme technical features ensure that the long term costs are very low. High Pressure Steam Boilers are delivered in small and medium-sized designs and suitable for very high steam pressure applications. They are available in ...
-
Manufactured by FKAB Marine Designbased in SWEDEN
The FKAB design is a bitumen, chemical and product oil tanker with independent cargo tanks for bitumen and asphalt with a temperature of up to 250°C. The vessel is designed with single bottom and double sides for ballast ...
-
Manufactured by Henan Machinery & Equipment Company Limitedbased in CHINA
The burner is also called a burner. It can be divided into an oil burner and a gas burner according to the fuel; it is divided into a kiln burner and a boiler burner according to the object of use; it can be divided into industrial burners, civil burners and specials according to the application fields. burner. The fuel burner is divided into light oil (such as diesel) and heavy oil burner (such ...
-
Manufactured by Fireye Inc.based in USA
The SP-32-NG/PG-ND (32 mm outer diameter, NG - Natural gas or PG - Propane gas, ND - natural draught) gas pilot is a reliable and effective source of ignition for oil and gas burners. The pilot is constructed of high-quality materials, and each unit is checked and tested before dispatch. The SP-32-NG/PG-ND pilot can operate as an intermittent (light-off), or as a continuous gas ...
-
Manufactured by Limpsfieldbased in UNITED KINGDOM
Limpsfield burners have the capability of firing a range of different fuel oils. Whilst still maintaining efficient combustion throughout the firing range. We do this by using pressure atomization, or alternately using steam/ air ...
-
Manufactured by Enevabased in TURKEY
Hot oil boilers are systems that can produce heat under low pressure in high temperature applications. The oil used in hot oil boilers does not deteriorate in a short time it should be designed carefully in terms of, otherwise, the film temperatures in the boiler, i.e. the oil degradation rates, may rise and new oil may be required in a short time. It should be remembered that every 10 ° C ...
-
Manufactured by VDM Metals International GmbHbased in GERMANY
Modern day key industry components are often exposed to high and highest temperatures and require the use of innovative high-temperature alloys. These usually heat-resistant or high-temperature materials have found a wide range of applications not only in furnaces and heat treatment plants, but they are also used as a substrate material for heavily stressed metallic catalysts. Other typical ...
-
Manufactured by World Thermal Service AB (WTS)based in SWEDEN
It gives the customer an opportunity to convert existing boilers into production units with renewable fuel at a lower capital cost than building a new boiler. The existing fuel is still available and can always be used as back up or topping up. When installing a new combustion system in an existing boiler the customer get a dual or triple fuel installation and can choose the most preferred fuel ...
-
Manufactured by Henan New Guoxin Machinery Manufacturing Co.,Ltd.based in CHINA
The coconut peat air flow dryer is suitable for drying coconut coir,rice husk,sawdust,etc..The diameter of these material should be less than 3mm and the length should be less than 5mm,final product will be achieve the best ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Equipment Technical Specifications: Model: MSW1000. Feed Capacity: 200-400 kgs per feed. Burning Rate: 100 kgs per hour. Burning Time per Feed: 2-4 hours. Voltage: 380V. Power: 0.7Kw. Fuel: Natural Gas or Diesel oil. Burner: Italy Burner. Feed Mode: Manual. Fuel consumption (Oil): 8.0-20.0 Kgs/Hour. Fuel consumption (Gas): 10.0-20.0m3/Hour. External Dimensions: 200 x 170 x 230cm (without stack). ...
-
Manufactured by Superior Boiler Works, Inc.based in USA
The Apache 2-pass dryback boiler is designed for maximum efficiency, reliability and durability in today’s most demanding environments. Available with NOx reduction technology to sub 9 ppm. With pressures of 15 to 300 psi steam and 30 to 160 psi hot water, the Apache is the intelligent option for your particular needs. Available in sizes ranging from 40 to 2,500 ...
-
Manufactured by Eclipse, Inc.based in USA
Incini-Cone burners are designed for fume incineration and the after-heating of exhaust from turbines, dryers, ovens and similar equipment. The burner is mounted in the exhaust duct and requires the exhaust stream to supply all of the oxygen needed for complete combustion. Burner assemblies include the burner body, gas or oil gun, gas pilot with ignition plug and peepsight. Nine sizes are ...
-
Manufactured by Superior Boiler Works, Inc.based in USA
The Arrowhead 3-pass firebox design with wetback boiler is designed for maximum efficiency, reliability and durability in today’s most demanding environments. Available with NOx reduction technology to 9 ppm. With pressures of 15 psi steam and 30 psi hot water, the Arrowhead is the intelligent option for your particular needs. Available in sizes ranging from 10 to 100 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you