Oil Combustion Equipment For Fossil Energy In Africa
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
Thermal oil heater complete with combustion air preheating system. Efficiency > 93%. TH/AR is the most efficient type of thermal oil heater. It is equipped with an especially engeneered combustion air preheating system, allowing to rise the efficiency of this unique HI-THECH boiler up to 94%. The Heater is composed of a multibolar spirally rolled furnace and body, completely shielded on front ...
-
Manufactured by Muntersbased in USA
VariMax IFRG combines Des Champs Products heat-exchanger design with indirect heating technologies to deliver contaminant-free process air with very high efficiency. Recirculation of the combustion gases allows the heater to attain an efficiency of 90%, 1,000°F (555°C) temperature rise, 1,200°F (649°C) discharge temperature, and a 40:1 ...
-
Manufactured by Steam House Ltdbased in MAURITIUS
All burners feature high versatility on different types of domestic, commercial and industrial application; Aluminium casing up to MAIOR P 200.1 and steel casing from P 300.1 with electrical panel on ...
-
Manufactured by Steam House Ltdbased in MAURITIUS
New control box Thermowatt allowing to improve the interface with service personnel; the digital display (PAB versions) featuring the interactive language with pictograms gives real time information about burner operation and statistics stored during the heating ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical atomization which ensures the mixture is a fine ...
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
Small and medium capacity thermal oil heaters. Our TH thermal oil heaters have been engineered for maximum efficiency even without feed air preheater. On these kind of boilers it is possible to install every type of commercial burner, which allows the costumer to have an easy and low cost of the after sales service, anywhere needed. POWER KW: ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SA ACKE TEMINOX GL burner combines all the benefit s of a modern combustion plant . It is designed for industrial heat and steam generation. It s ef ficient and low-pollut ant combustion complies with the most stringent NOX emissions requirements in place with a low CO and residual oxygen content in the exhaust ...
-
Manufactured by Muntersbased in USA
The VariMax™ OTH (Once-Through Heater) is a high efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion. The OTH is well-suited for recirculating ovens, dryers, makeup-air applications in cold environments, and industrial processes with moderate temperature rises. The counterflow configuration, ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers for tankers and ...
-
Manufactured by SAACKE GmbHbased in GERMANY
Use instead of waste. The ROTONOX GL uses rotary atomiser technology to burn a wide range of gaseous and highly viscous liquids more economically and with lower emissions than any other burner. Even contaminated oils and biogenic fuels are no problem for the ROTONOX GL and underline the strength of the robust design. The rotary atomiser technology offers maximum reliability with optimum burnout, ...
-
Manufactured by Forney Corporationbased in USA
Our Liquid Fuel Duct Burners inject fuel from the side of the duct to keep the fuel cool until it is burned. An “anchoring” baffle ensures the flame spans the duct to provide even heat distribution. Our patented technology ensures excellent mixing of the turbine exhaust gas and fuel, resulting in clean combustion with reduced CO emissions. Our design eliminates performance variations ...
-
Manufactured by Forbes Marshallbased in INDIA
The ECR (Electronic Compound Regulation) burner operation, efficiency monitoring and control system from Forbes Marshall is the smartest offering in burners. This innovative product provides end to end solutions for monitoring and controlling boilers to the optimum efficiency, at any load and at any time. The ECR burner system is equipped with a user-friendly touch screen display which ...
-
Manufactured by Kemix (Pty) Ltd.based in SOUTH AFRICA
The carbon regeneration circuit is a process designed to restore the activated carbons ability to recover precious metals from Leached slurries. The objective of thermal regeneration is to remove organic species that have accumulated during the adsorption process thus recovering the original porous structure and activity with as little damage as possible to the activated carbon ...
-
Manufactured by Dunphy Combustion Ltd.based in UNITED KINGDOM
The 'T' series of monobloc, axial air flow burners are designed for use with all liquid and gaseous fuels and are suitable for industrial, process, property, waste to energy, drying and wastewater treatment applications. The burners' axial air flow produces the uniform air distribution essential to ensuring high combustion efficiency across a wide turndown range at ALL levels of firing. ...
-
Manufactured by Atlas Incinerators ApSbased in DENMARK
The Atlas series consists of the reliable, cost efficient incinerators that our customers know us for. The design is based on our almost 50 years of experience. And with more that 9,000 units supplied over the time, the model has proven itself on the market time and time ...
-
Manufactured by SAACKE GmbHbased in GERMANY
As an innovative development in the domain of low NOx gas burners, the ATONOX from SAACKE heralds the start of a new generation. The secret lies mainly in the modular assembly system, from which various burner types can be readily configured. This makes the ATONOX extremely flexible and reduces effort and costs i.e. for ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The GCU (Gas Combustion Unit) developed by SAACKE makes the safe transport of liquefied natural gas (LNG) at sea possible. It utilises surplus boil-off gas completely and with maximum ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you