Oil Combustion Equipment For Fossil Energy In Australasia
-
Manufactured by VDM Metals International GmbHbased in GERMANY
Modern day key industry components are often exposed to high and highest temperatures and require the use of innovative high-temperature alloys. These usually heat-resistant or high-temperature materials have found a wide range of applications not only in furnaces and heat treatment plants, but they are also used as a substrate material for heavily stressed metallic catalysts. Other typical ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical atomization which ensures the mixture is a fine ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
Dual fuel burners are most commonly used if the fuel source is intermittent. By having both gas and oil fuel options available, it ensures the downtime of the boiler is limited. This dual fuel burner is suitable for use with natural gas, LPG, towns gas, biogas and light ...
-
Manufactured by Ecoflam Bruciatori S.p.A.based in ITALY
All burners feature high versatility on different types of domestic, commercial and industrial ...
-
Manufactured by Ecoflam Bruciatori S.p.A.based in ITALY
MAXFLAM and OILFLAM range work with heavy oil up to 50°E at 50°C with On/Off switch to exclude the circuit heaters in order to operate also with low viscosity heavy ...
-
Manufactured by Advanced Combustion Engineeringbased in AUSTRALIA
Advanced Combustion Engineering 'Controlled Air Incinerators' are primarily designed for batch operation with a burning cycle of approximately two hours and a cooling cycle also of approx, two hours, depending upon the density and calorific value of the waste. Unlike conventional multiple chamber incinerators which have large quantities of excess air, a controlled air incinerator uses less than ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
This burner is suitable for use with both light oil and kerosene with single stage on/off operation. Available for both conventional and ducted air options and is typically suitable for domestic and commercial hot water boilers, air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, Trianco and ...
-
Manufactured by Muntersbased in USA
VariMax IFRG combines Des Champs Products heat-exchanger design with indirect heating technologies to deliver contaminant-free process air with very high efficiency. Recirculation of the combustion gases allows the heater to attain an efficiency of 90%, 1,000°F (555°C) temperature rise, 1,200°F (649°C) discharge temperature, and a 40:1 ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco AC round flame combination oil and gas ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco AK Staged Air Low Emissions Burner is a round flame combination oil and gas ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The GCU (Gas Combustion Unit) developed by SAACKE makes the safe transport of liquefied natural gas (LNG) at sea possible. It utilises surplus boil-off gas completely and with maximum ...
-
Manufactured by VDM Metals International GmbHbased in GERMANY
Nickel alloys from VDM Metals are characterized by extreme corrosion resistance and heat stability and are easy to process. Their nickel content of at least 30 percent makes them an important material for use in the chemical process industry, in energy and environmental engineering, and also in the electronics and electrical engineering sectors. Each of our alloys has a unique combination of ...
-
Manufactured by Ecoflam Bruciatori S.p.A.based in ITALY
Ecofam Duoblock burners (TS = Separate Head) have been developed to complete its ofer for commercial and industrial combuston ...
-
Manufactured by SAACKE GmbHbased in GERMANY
As an innovative development in the domain of low NOx gas burners, the ATONOX from SAACKE heralds the start of a new generation. The secret lies mainly in the modular assembly system, from which various burner types can be readily configured. This makes the ATONOX extremely flexible and reduces effort and costs i.e. for ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
This burner is suitable for use with both light oil and kerosene with single stage on/off operation. Available for both conventional and ducted air options and is typically suitable for domestic and commercial hot water boilers, air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, Trianco and Grant. ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
These burners are available for use on natural gas with a single stage on/off operation. They are available for both conventional and ducted air options and are typically suitable for domestic and commercial hot water boilers and air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, Trianco and ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
This burner is suitable for use with both light oil and kerosene with single stage on/off operation. Available for both conventional and ducted air options and is typically suitable for domestic and commercial hot water boilers, air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, Trianco and ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
This burner is suitable for use with both light oil and kerosene with single stage on/off operation. Available for both conventional and ducted air options and is typically suitable for domestic and commercial hot water boilers, air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, Trianco and ...
-
Manufactured by Durag Groupbased in GERMANY
Self-monitoring and fail-safe burner control for the control of gas and oil burners as well as combined gas/oil burners of any ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
Dual fuel burners are most commonly used if the fuel source is intermittent. By having both gas and oil fuel options available, it ensures the downtime of the boiler is limited. This dual fuel burner is suitable for use with natural gas, LPG, towns gas, biogas and light oil. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you