Oil Combustion Equipment For Fossil Energy In Latin America
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical atomization which ensures the mixture is a fine ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
This burner works with oxygen instead of air. After commissioning with a support fuel such as natural gas or heating oil, this burner works with almost any combustible fuel. This process can be retrofitted without having to install a new burner block in the existing combustion chamber. With the special PreCOMB muffle system, it is possible to run additional fuel ...
-
Manufactured by Muntersbased in USA
VariMax IFRG combines Des Champs Products heat-exchanger design with indirect heating technologies to deliver contaminant-free process air with very high efficiency. Recirculation of the combustion gases allows the heater to attain an efficiency of 90%, 1,000°F (555°C) temperature rise, 1,200°F (649°C) discharge temperature, and a 40:1 ...
-
Manufactured by Körting Hannover AGbased in GERMANY
Oil / Gas burner with blower in Monoblock construction form with digital firing management up to 16 ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The GCU (Gas Combustion Unit) developed by SAACKE makes the safe transport of liquefied natural gas (LNG) at sea possible. It utilises surplus boil-off gas completely and with maximum ...
-
Manufactured by SAACKE GmbHbased in GERMANY
As an innovative development in the domain of low NOx gas burners, the ATONOX from SAACKE heralds the start of a new generation. The secret lies mainly in the modular assembly system, from which various burner types can be readily configured. This makes the ATONOX extremely flexible and reduces effort and costs i.e. for ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco AK Staged Air Low Emissions Burner is a round flame combination oil and gas ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco AC round flame combination oil and gas ...
-
Manufactured by Dunphy Combustion Ltd.based in UNITED KINGDOM
The 'T' series of monobloc, axial air flow burners are designed for use with all liquid and gaseous fuels and are suitable for industrial, process, property, waste to energy, drying and wastewater treatment applications. The burners' axial air flow produces the uniform air distribution essential to ensuring high combustion efficiency across a wide turndown range at ALL levels of firing. ...
-
Manufactured by Atlas Incinerators ApSbased in DENMARK
The Atlas series consists of the reliable, cost efficient incinerators that our customers know us for. The design is based on our almost 50 years of experience. And with more that 9,000 units supplied over the time, the model has proven itself on the market time and time ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SA ACKE TEMINOX GL burner combines all the benefit s of a modern combustion plant . It is designed for industrial heat and steam generation. It s ef ficient and low-pollut ant combustion complies with the most stringent NOX emissions requirements in place with a low CO and residual oxygen content in the exhaust ...
-
Manufactured by ERK Eckrohrkessel GmbHbased in GERMANY
Based on our experience with combustion systems ERK has developed a bubbling fluidised bed (BFB) technology capable of burning biomass and waste feedstocks, thereby achieving high fuel burnout, low NOx emissions and low part-load operation. The combustion system is fully integrated into the boiler and can be preassembled in the workshop to minimise site work. Some units were transported to site ...
-
Manufactured by SAACKE GmbHbased in GERMANY
Use instead of waste. The ROTONOX GL uses rotary atomiser technology to burn a wide range of gaseous and highly viscous liquids more economically and with lower emissions than any other burner. Even contaminated oils and biogenic fuels are no problem for the ROTONOX GL and underline the strength of the robust design. The rotary atomiser technology offers maximum reliability with optimum burnout, ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers for tankers and ...
-
Manufactured by VYNCKEbased in BELGIUM
Over the course of more than 100 years VYNCKE has acquired a lot of expertise in converting biomass and other solids to energy. With more than 4000 references worldwide, VYNCKE installations provide energy from hot water heaters, steam boilers, thermal oil heaters, multimedia plants (hot gas, thermal oil, steam, power generation in one system) and combined heat and power ...
-
Manufactured by Muntersbased in USA
The VariMax™ OTH (Once-Through Heater) is a high efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion. The OTH is well-suited for recirculating ovens, dryers, makeup-air applications in cold environments, and industrial processes with moderate temperature rises. The counterflow configuration, ...
-
Manufactured by Körting Hannover AGbased in GERMANY
A better technology to solve emission problems. Can be executed as a fan-assisted dust- / oil- / gas burner, Duoblock construction form, up to 75 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you