Oil Combustion Equipment For Fossil Energy
-
Manufactured by De Dietrich S.A.S.based in FRANCE
The CABK and CABK Plus range are steel boilers to be fitted out with oil or gas burner and a choice of four control panels: standard, B3, K3 or DIEMATIC m3. Their steel single block two flue gas path heating body helps them to achieve an efficiency of up to 92.4% depending on the model. The combustion chamber is especially designed to adapt easily to all blown air oil and gas burners, including ...
-
Manufactured by Akkayabased in TURKEY
In Akkaya KYK-HLZ thermal oil heaters, the total length of the tubes and the pressure losses are calculated carefully and the heaters are designed in this manner. For the solid fuel fired boilers it is very important to have sufficient combustion chamber volume and grate area in order to obtain efficient combustion. It is possible to get required dimensions for the combustion chamber in KYKHLZ ...
-
Manufactured by Alternate Heating Systemsbased in USA
The Coal Guns are coal stoker boilers. Our coal boilers are made in southern Pennsylvania. We use thick high-quality steel that gives you a lifetime of service. The Coal Gun uses our trademark Thermo Ash-Regulating Control System. This system constantly monitors the burn rate, to make sure each ounce of coal yields its maximum heat capacity. Because we monitor the ash temperature your coal boiler ...
-
Manufactured by Kemix (Pty) Ltd.based in SOUTH AFRICA
The carbon regeneration circuit is a process designed to restore the activated carbons ability to recover precious metals from Leached slurries. The objective of thermal regeneration is to remove organic species that have accumulated during the adsorption process thus recovering the original porous structure and activity with as little damage as possible to the activated carbon ...
-
by McBurneybased in USA
The Modul-Pak boiler is a hybrid design that combines the benefits of a watertube furnace and a multipass firetube boiler. The results are a value engineered modular package boiler that offers unique advantages for solid fuel ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Model: YD-10. Feed Capacity: 20 kgs per feed. Burning Rate: 10 kgs per hour. Burning Time per Feed: 2 hours. Voltage: 220V. Power: 0.5Kw. Fuel: Diesel oil. Burner: China Burner. Feed Mode: Manual. Fuel consumption (Oil): 5.4-12.6 Kgs/Hour. External Dimensions: 100 x 100 x 160cm (mainbody). Internal Dimensions: 50 x 50 x 80cm(Primary Chamber). Waste combustion chamber: 200Liters. Post Combustion ...
-
Manufactured by SAACKE GmbHbased in GERMANY
As an innovative development in the domain of low NOx gas burners, the ATONOX from SAACKE heralds the start of a new generation. The secret lies mainly in the modular assembly system, from which various burner types can be readily configured. This makes the ATONOX extremely flexible and reduces effort and costs i.e. for ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The GCU (Gas Combustion Unit) developed by SAACKE makes the safe transport of liquefied natural gas (LNG) at sea possible. It utilises surplus boil-off gas completely and with maximum ...
-
Manufactured by Probusbased in LATVIA
A burners that allows to save of heating costs while giving you comfort, reliability and easy maintenance. The burner is perfectly suitable for different used motor oils, vegetable oils and thick diesel or spirits and conventional heating oils. Designed and manufactured in Latvia. This is the perfect investment for those who have access to cheaper fuels or have waste fuels freely ...
-
Manufactured by Brandenburger Liner GmbH & Co. KGbased in GERMANY
BRA-BOARD HT 4 belongs to the group of averagely dense, asbestos-free silicate ...
-
Manufactured by Ekotek Isı Teknolojileribased in TURKEY
Anka Series thermal oil boilers has 100.000 Kcal / h – 6.000.000 Kcal / h Heat Capacity. Our company is EKOTEK, Trademark registered and controlled and audited by ISO 9001: 2015 quality management ...
-
Manufactured by ECOSTARbased in TURKEY
Optimum fuel / air mixture with special gas nozzle. High pressure, light build fan design. Low noise level due to light and aerodynamic body design made of high quality aluminum. Sliding flange for connection to different boiler types. Automatic control equipment of the burner according to European standard EN-267. Easy access to all equipments without dismounting the burner from the boiler. High ...
-
Manufactured by E&M Combustión, S.L.based in SPAIN
EM: The most extensive range on the market; EM Burners. Burners for all types of liquid and gas fuels. The standard range includes burners for traditional fuels, such as gas-oil, natural gas and LPG, fuel oil and combined burners for gas-gas-oil and gas-fuel oil. We also cater for special arrangements for the combustion of biogases, recycled oils and other types of alternative fuels as ...
-
Manufactured by Cleaver-Brooksbased in USA
Leveraging our extensive experience and expertise in heat and mass transfer to supply custom waste heat recovery units for turbine exhaust, process furnaces and other heat sources for water, glycol mixtures and thermal oil fluid heaters. Waste Heat Recovery Units (WHRUs) are available in vertical, horizontal or combination gas flow arrangements to conform to any space requirements. These units ...
-
Manufactured by heat 11 GmbH & Co. KGbased in GERMANY
With efficient container plants we solve (almost) any problem of space and assembly. Quick, safe, reliable. ...
-
Manufactured by ARIANTO DARMAWAN,PTbased in INDONESIA
Weishaupt burners are equipped with electronic compound and digital combustion management since combustion technologies demand a precise, continually reproducible dosing of fuel and combustion air. They meet all the demands for safety, reliability, and low cost servicing. All important functions are controlled with digital precision. The aim is the optimization of operational functions, the ...
-
Manufactured by Probusbased in LATVIA
A burners that allows to save of heating costs while giving you comfort, reliability and easy maintenance. The burner is perfectly suitable for different used motor oils, vegetable oils and thick diesel or spirits and conventional heating oils. Designed and manufactured in Latvia. This is the perfect investment for those who have access to cheaper fuels or have waste fuels freely available ...
-
Manufactured by Alfa-Therm Limitedbased in INDIA
Pressure jet type monoblock fully automatic burners in oil and gas firing upto 1 million ...
-
Manufactured by Combution Concept Pvt. Ltd.based in INDIA
Duobloc with unmatched flexibility. All liquid fuels indicated can be burnt efficiently. All burners are modulating type suitable for continuous fuel regulation. High efficiency, low maintainance and long service life. Can be supplied for combustion air temperatures upto 400 degree C. Fully Automatic with excellent safety features. Separate fan increases firing flexibility like high furnace back ...
-
Manufactured by Ecoflam Bruciatori S.p.A.based in ITALY
Ecofam Duoblock burners (TS = Separate Head) have been developed to complete its ofer for commercial and industrial combuston ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you