Oil Purification Applications in Europe
-
Premium
Determination of aromatic hydrocarbons in electrical insulating oils
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
By Lumex Instruments Distributor in , UNITED KINGDOM.
-
Hydrogen gas solutions for refinery hydrogen sector
ITM Power can provide a clean, on-site hydrogen supply which will decarbonise the refining process and reduce emissions. Refinery’s use vast quantities of hydrogen in the de-sulfurization of crude oil to make petrol and diesel. Recently with the demand of diesel increasing, this has led to a demand increase for hydrogen, as diesel requires more refining than petrol. Currently hydrogen used in this process is made via steam methane reformation (SMR) which usually involves natural gas for the feedstock for the ...
By ITM Power based in Sheffield, UNITED KINGDOM.
-
Filter for Oil Refining - FCC Fractionator and Pipestill
PROCESS INFORMATION: The Fractionator is fed from the reactor and side strippers are injected with steam. Naphtha and Light Cycle Oil are produced. In a Pipestill, fed from a crude furnace, the side strippers produce Jet A, Gas Oil and Diesel or Heavy Gas ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Filter for Oil Refining - Merox Unit
PROCESS INFORMATION: In (UOP) Merox Units, where crudes are acidic, Caustic is used to reduce H2S traces and the Mercaptan Sulphur content. Caustic Treating Systems are done with a Pre-Washer followed by a Reactor vessel. The mixture is then fed to a liquid-liquid separator to remove the water and caustic from the ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Filter for Oil Refining - MEA Unit
PROCESS INFORMATION: The Amine gas treating, also known as gas sweetening, refers to a process that uses aqueous solutions of various alkylamines (commonly known as amines) to remove hydrogen sulphide (H2S) and carbon dioxide (CO2) from gases. Aqueous solutions of MEA (monoethanolamine) are used as a gas stream scrubbing liquid in amine treaters to remove H2S from sour natural gas. The MEA reacts with acidic compounds dissolved in the solution, using a large surface area to contact with the cold scrubbing solution ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Flow & energy management solutions for oil and petrochemical industry
Crude oil (after first stage separator), offloading of crude oil, water injection or refined petroleum. EF10-C clamp-on,non-intrusive ultrasonic flowmeter for easy installation. The enclosure is IP65 (NEMA 4X) wall-mount type. Class 1 Div 2 version can be offerred upon ...
By Spire Metering Technology, LLC. Distributor in Eastwood, UNITED KINGDOM.
-
Filter for Oil Refining - Vacuum Unit
PROCESS INFORMATION: The Vacuum Unit is fed with Crude Bottoms and is injected with steam. Passing upwards through wash oil stages, the gas exits to an overhead condenser, where cleaned gas goes to LT Ends, and Naphtha and Light Cycle Oil are produced as liquids. From side streams the Vacuum Unit sends HVGO to the FCC Fractionator and LVGO to the Hydrocracker or for ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Transformer Oil Purification
Transformer Oil Purification helps to extend the lifetime of transformer oil as it prevents the deterioration of the transformers' insulating fluids. Deterioration is mainly due to contamination, overheating, electrical stress, and oxidation. There are two main mechanisms occurring in the transformer oil during operation which cause deterioration: moisture contamination and oxidation. Both are fought with the help of transformer oil purifying and transformer oil regeneration systems. ...
By Hering-VPT GmbH based in Dinkelsbühl, GERMANY.
-
Filter for Oil Refining - Naptha Hydrotreater
PROCESS INFORMATION: The Naptha Hydrotreater prepares feedstock for downstream reforming or isomerization. The naphtha feed is mixed with hydrogen rich recycle gas. The mixed feed is then heated and then fed to the reactor, which contains a cobalt-molybdenum or nickel-molybdenum catalyst to convert contaminants such as sulphur, nitrogen, oxygenates and halides to hydrogen sulphide, ammonia, water and hydrogen halides. These can then be removed from the hydrocarbon stream. ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Analytical instrumentation for the chemical industry
The petroleum refining industry converts crude oil into more than 2500 refined products, the primaries are LPG, gasoline, naphtha, kerosene, diesel, heavy fuel oil, lubricating oils, wax and asphalt. The petroleum refineries produce also the major hydrocarbon sources used as feedstocks for petrochemical industry, mainly olefins and aromatics, that converted to produce monomers and polymers, molecules which are building-blocks for many everyday chemical products. The refining and petrochemical employs a wide ...
By Focused Photonics Inc. (FPI) Distributor in Assemini, ITALY.
-
Organic Rankine Cycle (ORC) Systems for Oil & Gas
Turboden Organic Rankine Cycle (ORC) units enable power production (up to 20 MW per single turbine) by recovering excess waste heat from the exhausts of gas turbines or reciprocating engines, or from the hot streams typical in Oil & Gas industry. ORC turbogenerators provide a solution to improving the efficiency of typical Oil & Gas processes, by allowing users to reduce their environmental footprint through converting waste, high-to-low grade heat, into mechanical/electric ...
By Turboden S.p.A based in Brescia, ITALY.
-
Flotation-Filtration System for Refining
akvoFloat™ can handle any refinery effluent –regardless of the oil and TSS concentration– as a one-stop pretreatment solution for the biological treatment, acting as a reliable absolute barrier. Unlike conventional technologies, akvoFloat™ can remove dispersed and emulsified ...
By akvola Technologies GmbH based in Berlin, GERMANY.
-
Industrial Use
Since 1975, the demand for hydrogen used in industrial purposes has increased more than threefold, and the global demand continues to ...
By Norwegian Hydrogen AS based in Ålesund, NORWAY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you